Refine Your Search

Topic

Search Results

Viewing 1 to 17 of 17
Technical Paper

Research on Vehicle Cybersecurity Based on Dedicated Security Hardware and ECDH Algorithm

2017-09-23
2017-01-2005
Vehicle cybersecurity consists of internal security and external security. Dedicated security hardware will play an important role in car’s internal and external security communication. ...For certain AURIX MCU consisting of HSM, the experiment result shows that cheaper 32-bit HSM’s AES calculating speed is 25 times of 32-bit main controller, so HSM is an effective choice to realize cybersecurity. After comparing two existing methods that realize secure CAN communication, A Modified SECURE CAN scheme is proposed, and differences of the three schemes are analyzed.
Technical Paper

State of the Art Survey on Comparison of Physical Fingerprinting-Based Intrusion Detection Techniques for In-Vehicle Security

2020-04-14
2020-01-0721
Controller area network (CAN) is used as a legacy protocol for in-vehicle communication. However, it lacks basic security features such as message authentication, integrity, confidentiality, etc., because the sender information in the message is missing. Hence, it is prone to different attacks like spoofing attacks, denial of service attacks, man in the middle and masquerade attacks. Researchers have proposed various techniques to detect and prevent these attacks, which can be split into two classes: (a) MAC-based techniques and (b) intrusion detection-based techniques. Further, intrusion detection systems can be divided into four categories: (i) message parameter- based, (ii) entropy-based, (iii) machine Learning-based and (iv) fingerprinting-based. This paper details state-of- the-art survey of fingerprinting-based intrusion detection techniques. In addition, the advantages and limitations of different fingerprinting-based intrusion detection techniques methods will be discussed.
Technical Paper

Cyber Security in the Automotive Domain – An Overview

2017-03-28
2017-01-1652
Driven by the growing internet and remote connectivity of automobiles, combined with the emerging trend to automated driving, the importance of security for automotive systems is massively increasing. Although cyber security is a common part of daily routines in the traditional IT domain, necessary security mechanisms are not yet widely applied in the vehicles. At first glance, this may not appear to be a problem as there are lots of solutions from other domains, which potentially could be re-used. But substantial differences compared to an automotive environment have to be taken into account, drastically reducing the possibilities for simple reuse. Our contribution is to address automotive electronics engineers who are confronted with security requirements. Therefore, it will firstly provide some basic knowledge about IT security and subsequently present a selection of automotive specific security use cases.
Technical Paper

Communication Requirements for Plug-In Electric Vehicles

2011-04-12
2011-01-0866
This paper is the second in the series of documents designed to record the progress of a series of SAE documents - SAE J2836™, J2847, J2931, & J2953 - within the Plug-In Electric Vehicle (PEV) Communication Task Force. This follows the initial paper number 2010-01-0837, and continues with the test and modeling of the various PLC types for utility programs described in J2836/1™ & J2847/1. This also extends the communication to an off-board charger, described in J2836/2™ & J2847/2 and includes reverse energy flow described in J2836/3™ and J2847/3. The initial versions of J2836/1™ and J2847/1 were published early 2010. J2847/1 has now been re-opened to include updates from comments from the National Institute of Standards Technology (NIST) Smart Grid Interoperability Panel (SGIP), Smart Grid Architectural Committee (SGAC) and Cyber Security Working Group committee (SCWG).
Technical Paper

Evaluating Trajectory Privacy in Autonomous Vehicular Communications

2019-04-02
2019-01-0487
Autonomous vehicles might one day be able to implement privacy preserving driving patterns which humans may find too difficult to implement. In order to measure the difference between location privacy achieved by humans versus location privacy achieved by autonomous vehicles, this paper measures privacy as trajectory anonymity, as opposed to single location privacy or continuous privacy. This paper evaluates how trajectory privacy for randomized driving patterns could be twice as effective for autonomous vehicles using diverted paths compared to Google Map API generated shortest paths. The result shows vehicles mobility patterns could impact trajectory and location privacy. Moreover, the results show that the proposed metric outperforms both K-anonymity and KDT-anonymity.
Technical Paper

Selftrust - A Practical Approach for Trust Establishment

2020-04-14
2020-01-0720
In recent years, with increase in external connectivity (V2X, telematics, mobile projection, BYOD) the automobile is becoming a target of cyberattacks and intrusions. Any such intrusion reduces customer trust in connected cars and negatively impacts brand image (like the recent Jeep Cherokee hack). To protect against intrusion, several mechanisms are available. These range from a simple secure CAN to a specialized symbiote defense software. A few systems (e.g. V2X) implement detection of an intrusion (defined as a misbehaving entity). However, most of the mechanisms require a system-wide change which adds to the cost and negatively impacts the performance. In this paper, we are proposing a practical and scalable approach to intrusion detection. Some benefits of our approach include use of existing security mechanisms such as TrustZone® and watermarking with little or no impact on cost and performance. In addition, our approach is scalable and does not require any system-wide changes.
Technical Paper

A Safety and Security Testbed for Assured Autonomy in Vehicles

2020-04-14
2020-01-1291
Connectivity and autonomy in vehicles promise improved efficiency, safety and comfort. The increasing use of embedded systems and the cyber element bring with them many challenges regarding cyberattacks which can seriously compromise driver and passenger safety. Beyond penetration testing, assessment of the security vulnerabilities of a component must be done through the design phase of its life cycle. This paper describes the development of a benchtop testbed which allows for the assurance of safety and security of components with all capabilities from Model-in-loop to Software-in-loop to Hardware-in-loop testing. Environment simulation is obtained using the AV simulator, CARLA which provides realistic scenarios and sensor information such as Radar, Lidar etc. MATLAB runs the vehicle, powertrain and control models of the vehicle allowing for the implementation and testing of customized models and algorithms.
Journal Article

Improvement of the Resilience of a Cyber-Physical Remote Diagnostic Communication System against Cyber Attacks

2019-04-02
2019-01-0112
In the near future, vehicles will operate autonomously and communicate with their environment. This communication includes Vehicle-to-Vehicle (V2V), Vehicle-to-Infrastructure (V2I) communication, and comunication with cloud-based servers (V2C). To improve the resilience of remote diagnostic communication between a vehicle and external test equipment against cyberattacks, it is imperative to understand and analyze the functionality and vulnerability of each communication system component, including the wired and wireless communication channels. This paper serves as a continuation of the SAE Journal publication on measures to prevent unauthorized access to the in-vehicle E/E system [9], explains the components of a cyber-physical system (CPS) for remote diagnostic communication, analyzes their vulnerability against cyberattacks and explains measures to improve the resiliance.
Technical Paper

Hardware/Software Co-Design of an Automotive Embedded Firewall

2017-03-28
2017-01-1659
The automotive industry experiences a major change as vehicles are gradually becoming a part of the Internet. Security concepts based on the closed-world assumption cannot be deployed anymore due to a constantly changing adversary model. Automotive Ethernet as future in-vehicle network and a new E/E Architecture have different security requirements than Ethernet known from traditional IT and legacy systems. In order to achieve a high level of security, a new multi-layer approach in the vehicle which responds to special automotive requirements has to be introduced. One essential layer of this holistic security concept is to restrict non-authorized access by the deployment of embedded firewalls. This paper addresses the introduction of automotive firewalls into the next-generation domain architecture with a focus on partitioning of its features in hardware and software.
Technical Paper

Experimental Setup Enabling Self-Confrontation Interviews for Modelling Naturalistic Driving Behavior

2019-04-02
2019-01-1082
Behavioral models of traffic actors have a potential of unlocking sophisticated safety features and mitigating several challenges of urban automated driving. Intuitively, volunteers driving on routes of daily commuting in their private vehicles are the preferred source of information to be captured by data collection system. Such dataset can then serve as a basis for identifying efficient methods of context representation and parameterization of behavioral models. This paper describes the experimental setup supporting the development of driver behavioral models within the SIMUSAFE project. In particular, the paper presents an IoT data acquisition and analysis infrastructure supporting self-confrontation interviews with drivers. The proposed retrofit system was installed in private vehicles of volunteers in two European cities. Wherever possible, the setup used open source software and electronic components available on consumer market.
Technical Paper

Buckendale Lecture Series: Transformational Technologies Reshaping Transportation—A Government Perspective

2018-09-01
2018-01-2011
Transportation departments are under-going a dramatic transformation, shifting from organizations focused primarily on building roads to a focus on mobility for all users. The transformation is the result of rapidly advancing autonomous vehicle technology and personal telecommunication technology. These technologies provide the opportunity to dramatically improve safety, mobility, and economic opportunity for society and industry. Future generations of engineers and other transportation professionals have the opportunity to be part of that societal change. This paper will focus on the technologies state DOT’s and the private sector are researching, developing, and deploying to promote the future of mobility and improved efficiency for commercial trucking through advancements in truck platooning, self-driving long-haul trucking, and automated last mile distribution networks.
Technical Paper

CAN Crypto FPGA Chip to Secure Data Transmitted Through CAN FD Bus Using AES-128 and SHA-1 Algorithms with A Symmetric Key

2017-03-28
2017-01-1612
Robert Bosch GmBH proposed in 2012 a new version of communication protocol named as Controller area network with Flexible Data-Rate (CANFD), that supports data frames up to 64 bytes compared to 8 bytes of CAN. With limited data frame size of CAN message, and it is impossible to be encrypted and secured. With this new feature of CAN FD, we propose a hardware design - CAN crypto FPGA chip to secure data transmitted through CAN FD bus by using AES-128 and SHA-1 algorithms with a symmetric key. AES-128 algorithm will provide confidentiality of CAN message and SHA-1 algorithm with a symmetric key (HMAC) will provide integrity and authentication of CAN message. The design has been modeled and verified by using Verilog HDL – a hardware description language, and implemented successfully into Xilinx FPGA chip by using simulation tool ISE (Xilinx).
Technical Paper

Case Study for Defining Security Goals and Requirements for Automotive Security Parts Using Threat Modeling

2018-04-03
2018-01-0014
Several external networks like telematics, and SOTA and many in-vehicle networks by gateways and domain controllers have been increasingly introduced. However, these trends may potentially make many critical data opened, attacked and modified by hackers. These days, vehicle security has been significantly required as these vehicle security threats are related to the human life like drivers and pedestrians. Threat modeling is process of secure software development lifecycle which is developed by Microsoft. It is a systematic approach for analyzing the potential threat in software and identifying the security risk associated with software. Through threat modeling, security risk is be mitigated and eliminated. In vehicle software System, one of vulnerability can affect critical problem about safety. An approach from experience and hacking cases is not enough for analyzing the potential threat and preparing new hacking attack.
Technical Paper

Application of Suspend Mode to Automotive ECUs

2018-04-03
2018-01-0021
To achieve high robustness and quality, automotive ECUs must initialize from low-power states as quickly as possible. However, microprocessor and memory advances have failed to keep pace with software image size growth in complex ECUs such as in Infotainment and Telematics. Loading the boot image from non-volatile storage to RAM and initializing the software can take a very long time to show the first screen and result in sluggish performance for a significant time thereafter which both degrade customer perceived quality. Designers of mobile devices such as portable phones, laptops, and tablets address this problem using Suspend mode whereby the main processor and peripheral devices are powered down during periods of inactivity, but memory contents are preserved by a small “self-refresh” current. When the device is turned back “on”, fully initialized memory content allows the system to initialize nearly instantaneously.
Research Report

Unsettled Topics in the Application of Satellite Navigation to Air Traffic Management

2020-05-27
EPR2020010
Contemporary air traffic management (ATM) challenges are both (1) acute and (2) growing at rates far outpacing established ways for absorbing technological innovation. Lack of timely response will guarantee failure to meet demands. Immediately that creates a necessity to identify means of coping and judging new technologies based on possible speed of adoption. Paralleling the challenges are developments in capability, both recent and decades old. Some steps (e.g., Global Positioning System (GPS) backup) are well known and, in fact, should have progressed further long ago. Others (e.g., sharing raw measurements instead of position fixes) are equally well known and, if followed by further flight tests initiated (and successful) years ago, would have produced a wealth of in-flight experience by now if development had continued. Other possibilities (e.g., automated pilot override) are much less common and are considered largely experimental.
X