Refine Your Search

Search Results

Viewing 1 to 9 of 9
Technical Paper

Research on CAN Network Security Aspects and Intrusion Detection Design

2017-09-23
2017-01-2007
With the rapid development of vehicle intelligent and networking technology, the IT security of automotive systems becomes an important area of research. In addition to the basic vehicle control, intelligent advanced driver assistance systems, infotainment systems will all exchange data with in-vehicle network. Unfortunately, current communication network protocols, including Controller Area Network (CAN), FlexRay, MOST, and LIN have no security services, such as authentication or encryption, etc. Therefore, the vehicle are unprotected against malicious attacks. Since CAN bus is actually the most widely used field bus for in-vehicle communications in current automobiles, the security aspects of CAN bus is focused on. Based on the analysis of the current research status of CAN bus network security, this paper summarizes the CAN bus potential security vulnerabilities and the attack means.
Technical Paper

Proposal of HILS-Based In-Vehicle Network Security Verification Environment

2018-04-03
2018-01-0013
We propose a security-testing framework to analyze attack feasibilities for automotive control software by integrating model-based development with model checking techniques. Many studies have pointed out the vulnerabilities in the Controller Area Network (CAN) protocol, which is widely used in in-vehicle network systems. However, many security attacks on automobiles did not explicitly consider the transmission timing of CAN packets to realize vulnerabilities. Additionally, in terms of security testing for automobiles, most existing studies have only focused on the generation of the testing packets to realize vulnerabilities, but they did not consider the timing of invoking a security testing. Therefore, we focus on the transmit timing of CAN packets to realize vulnerabilities. In our experiments, we have demonstrated the classification of feasible attacks at the early development phase by integrating the model checking techniques into a virtualized environment.
Technical Paper

Evaluating Trajectory Privacy in Autonomous Vehicular Communications

2019-04-02
2019-01-0487
Autonomous vehicles might one day be able to implement privacy preserving driving patterns which humans may find too difficult to implement. In order to measure the difference between location privacy achieved by humans versus location privacy achieved by autonomous vehicles, this paper measures privacy as trajectory anonymity, as opposed to single location privacy or continuous privacy. This paper evaluates how trajectory privacy for randomized driving patterns could be twice as effective for autonomous vehicles using diverted paths compared to Google Map API generated shortest paths. The result shows vehicles mobility patterns could impact trajectory and location privacy. Moreover, the results show that the proposed metric outperforms both K-anonymity and KDT-anonymity.
Technical Paper

A Safety and Security Testbed for Assured Autonomy in Vehicles

2020-04-14
2020-01-1291
Connectivity and autonomy in vehicles promise improved efficiency, safety and comfort. The increasing use of embedded systems and the cyber element bring with them many challenges regarding cyberattacks which can seriously compromise driver and passenger safety. Beyond penetration testing, assessment of the security vulnerabilities of a component must be done through the design phase of its life cycle. This paper describes the development of a benchtop testbed which allows for the assurance of safety and security of components with all capabilities from Model-in-loop to Software-in-loop to Hardware-in-loop testing. Environment simulation is obtained using the AV simulator, CARLA which provides realistic scenarios and sensor information such as Radar, Lidar etc. MATLAB runs the vehicle, powertrain and control models of the vehicle allowing for the implementation and testing of customized models and algorithms.
Technical Paper

Connectivity in 2 Wheelers: Opportunities and Challenges

2019-11-21
2019-28-2437
Mobility is undergoing a “horses to cars”-sized shift that will reverberate across business and society for generations. Future of Mobility is mainly driven by 4 main pillars viz. Connected, Electrified, Automated and Shared Driving. With advancement in Communication Technology supplemented by huge customer base, Connectivity has proven to deliver better Services to the End-user. Connected Mobility is going to be the next Big Thing in the Mobility Arena. In this paper, we will try to qualitatively explore what Connected Mobility is all about and what it has to offer in terms of - Opportunities on one side as well as new challenges that were never witnessed in the realm of Mobility in the Past, with focus on the 2 wheeler segment. This paper focuses on Opportunities in terms of Location Based services, Vehicle Management, Data Analytics, Infotainment and possible Business scenarios and Models as well as challenges in Terms of Security and Data Ownership
Journal Article

Improvement of the Resilience of a Cyber-Physical Remote Diagnostic Communication System against Cyber Attacks

2019-04-02
2019-01-0112
In the near future, vehicles will operate autonomously and communicate with their environment. This communication includes Vehicle-to-Vehicle (V2V), Vehicle-to-Infrastructure (V2I) communication, and comunication with cloud-based servers (V2C). To improve the resilience of remote diagnostic communication between a vehicle and external test equipment against cyberattacks, it is imperative to understand and analyze the functionality and vulnerability of each communication system component, including the wired and wireless communication channels. This paper serves as a continuation of the SAE Journal publication on measures to prevent unauthorized access to the in-vehicle E/E system [9], explains the components of a cyber-physical system (CPS) for remote diagnostic communication, analyzes their vulnerability against cyberattacks and explains measures to improve the resiliance.
Technical Paper

Android Defense in Depth Strategy in an Automobile Ecosystem

2020-04-14
2020-01-1365
Android is becoming an environment of choice in the automotive sector because of near production grade open source stack availability and large developer community. With growing interest from Automotive OEMs for Android IVI (In-Vehicle Infotainment) solutions, we predict a similar growth trend in an automobile like in Mobile space. At another end, the need for more interconnected devices within the Automobile ecosystem is increasing, which leads to an increased threat to security. In sophisticated device interconnections, identifying the gateways and implementing the right security strategy is key to improve overall system security & stability. While Android is maturing for automotive and with growing interest from automotive OEMs, we spent time in analyzing current Android defense-in-depth concepts with the automotive perspective.
Technical Paper

Dyno-in-the-Loop: An Innovative Hardware-in-the-Loop Development and Testing Platform for Emerging Mobility Technologies

2020-04-14
2020-01-1057
Today’s transportation is quickly transforming with the nascent advent of connectivity, automation, shared-mobility, and electrification. These technologies will not only affect our safety and mobility, but also our energy consumption, and environment. As a result, it is of unprecedented importance to understand the overall system impacts due to the introduction of these emerging technologies and concepts. Existing modeling tools are not able to effectively capture the implications of these technologies, not to mention accurately and reliably evaluating their effectiveness with a reasonable scope. To address these gaps, a dynamometer-in-the-loop (DiL) development and testing approach is proposed which integrates test vehicle(s), chassis dynamometer, and high fidelity traffic simulation tools, in order to achieve a balance between the model accuracy and scalability of environmental analysis for the next generation of transportation systems.
Technical Paper

Application of Suspend Mode to Automotive ECUs

2018-04-03
2018-01-0021
To achieve high robustness and quality, automotive ECUs must initialize from low-power states as quickly as possible. However, microprocessor and memory advances have failed to keep pace with software image size growth in complex ECUs such as in Infotainment and Telematics. Loading the boot image from non-volatile storage to RAM and initializing the software can take a very long time to show the first screen and result in sluggish performance for a significant time thereafter which both degrade customer perceived quality. Designers of mobile devices such as portable phones, laptops, and tablets address this problem using Suspend mode whereby the main processor and peripheral devices are powered down during periods of inactivity, but memory contents are preserved by a small “self-refresh” current. When the device is turned back “on”, fully initialized memory content allows the system to initialize nearly instantaneously.
X