Controller area network (CAN) is used as a legacy protocol for in-vehicle communication. However, it lacks basic security features such as message authentication, integrity, confidentiality, etc., because the sender information in the message is missing. Hence, it is prone to different attacks like spoofing attacks, denial of service attacks, man in the middle and masquerade attacks. Researchers have proposed various techniques to detect and prevent these attacks, which can be split into two classes: (a) MAC-based techniques and (b) intrusion detection-based techniques. Further, intrusion detection systems can be divided into four categories: (i) message parameter- based, (ii) entropy-based, (iii) machine Learning-based and (iv) fingerprinting-based. This paper details state-of- the-art survey of fingerprinting-based intrusion detection techniques. In addition, the advantages and limitations of different fingerprinting-based intrusion detection techniques methods will be discussed.
This paper is the second in the series of documents designed to record the progress of a series of SAE documents - SAE J2836™, J2847, J2931, & J2953 - within the Plug-In Electric Vehicle (PEV) Communication Task Force. This follows the initial paper number 2010-01-0837, and continues with the test and modeling of the various PLC types for utility programs described in J2836/1™ & J2847/1. This also extends the communication to an off-board charger, described in J2836/2™ & J2847/2 and includes reverse energy flow described in J2836/3™ and J2847/3. The initial versions of J2836/1™ and J2847/1 were published early 2010. J2847/1 has now been re-opened to include updates from comments from the National Institute of Standards Technology (NIST) Smart Grid Interoperability Panel (SGIP), Smart Grid Architectural Committee (SGAC) and Cyber Security Working Group committee (SCWG).
We propose a security-testing framework to analyze attack feasibilities for automotive control software by integrating model-based development with model checking techniques. Many studies have pointed out the vulnerabilities in the Controller Area Network (CAN) protocol, which is widely used in in-vehicle network systems. However, many security attacks on automobiles did not explicitly consider the transmission timing of CAN packets to realize vulnerabilities. Additionally, in terms of security testing for automobiles, most existing studies have only focused on the generation of the testing packets to realize vulnerabilities, but they did not consider the timing of invoking a security testing. Therefore, we focus on the transmit timing of CAN packets to realize vulnerabilities. In our experiments, we have demonstrated the classification of feasible attacks at the early development phase by integrating the model checking techniques into a virtualized environment.
Autonomous vehicles might one day be able to implement privacy preserving driving patterns which humans may find too difficult to implement. In order to measure the difference between location privacy achieved by humans versus location privacy achieved by autonomous vehicles, this paper measures privacy as trajectory anonymity, as opposed to single location privacy or continuous privacy. This paper evaluates how trajectory privacy for randomized driving patterns could be twice as effective for autonomous vehicles using diverted paths compared to Google Map API generated shortest paths. The result shows vehicles mobility patterns could impact trajectory and location privacy. Moreover, the results show that the proposed metric outperforms both K-anonymity and KDT-anonymity.
In recent years, with increase in external connectivity (V2X, telematics, mobile projection, BYOD) the automobile is becoming a target of cyberattacks and intrusions. Any such intrusion reduces customer trust in connected cars and negatively impacts brand image (like the recent Jeep Cherokee hack). To protect against intrusion, several mechanisms are available. These range from a simple secure CAN to a specialized symbiote defense software. A few systems (e.g. V2X) implement detection of an intrusion (defined as a misbehaving entity). However, most of the mechanisms require a system-wide change which adds to the cost and negatively impacts the performance. In this paper, we are proposing a practical and scalable approach to intrusion detection. Some benefits of our approach include use of existing security mechanisms such as TrustZone® and watermarking with little or no impact on cost and performance. In addition, our approach is scalable and does not require any system-wide changes.
Connectivity and autonomy in vehicles promise improved efficiency, safety and comfort. The increasing use of embedded systems and the cyber element bring with them many challenges regarding cyberattacks which can seriously compromise driver and passenger safety. Beyond penetration testing, assessment of the security vulnerabilities of a component must be done through the design phase of its life cycle. This paper describes the development of a benchtop testbed which allows for the assurance of safety and security of components with all capabilities from Model-in-loop to Software-in-loop to Hardware-in-loop testing. Environment simulation is obtained using the AV simulator, CARLA which provides realistic scenarios and sensor information such as Radar, Lidar etc. MATLAB runs the vehicle, powertrain and control models of the vehicle allowing for the implementation and testing of customized models and algorithms.
In the near future, vehicles will operate autonomously and communicate with their environment. This communication includes Vehicle-to-Vehicle (V2V), Vehicle-to-Infrastructure (V2I) communication, and comunication with cloud-based servers (V2C). To improve the resilience of remote diagnostic communication between a vehicle and external test equipment against cyberattacks, it is imperative to understand and analyze the functionality and vulnerability of each communication system component, including the wired and wireless communication channels. This paper serves as a continuation of the SAE Journal publication on measures to prevent unauthorized access to the in-vehicle E/E system , explains the components of a cyber-physical system (CPS) for remote diagnostic communication, analyzes their vulnerability against cyberattacks and explains measures to improve the resiliance.
Robert Bosch GmBH proposed in 2012 a new version of communication protocol named as Controller area network with Flexible Data-Rate (CANFD), that supports data frames up to 64 bytes compared to 8 bytes of CAN. With limited data frame size of CAN message, and it is impossible to be encrypted and secured. With this new feature of CAN FD, we propose a hardware design - CAN crypto FPGA chip to secure data transmitted through CAN FD bus by using AES-128 and SHA-1 algorithms with a symmetric key. AES-128 algorithm will provide confidentiality of CAN message and SHA-1 algorithm with a symmetric key (HMAC) will provide integrity and authentication of CAN message. The design has been modeled and verified by using Verilog HDL – a hardware description language, and implemented successfully into Xilinx FPGA chip by using simulation tool ISE (Xilinx).
Today’s transportation is quickly transforming with the nascent advent of connectivity, automation, shared-mobility, and electrification. These technologies will not only affect our safety and mobility, but also our energy consumption, and environment. As a result, it is of unprecedented importance to understand the overall system impacts due to the introduction of these emerging technologies and concepts. Existing modeling tools are not able to effectively capture the implications of these technologies, not to mention accurately and reliably evaluating their effectiveness with a reasonable scope. To address these gaps, a dynamometer-in-the-loop (DiL) development and testing approach is proposed which integrates test vehicle(s), chassis dynamometer, and high fidelity traffic simulation tools, in order to achieve a balance between the model accuracy and scalability of environmental analysis for the next generation of transportation systems.