Refine Your Search


Search Results

Viewing 1 to 15 of 15
Journal Article

The Missing Link: Aircraft Cybersecurity at the Operational Level

Abstract Aircraft cybersecurity efforts have tended to focus at the strategic or tactical levels without a clear connection between the two. ...CSSEP’s process model postulates that security is best achieved by a balance of cybersecurity, cyber resiliency, defensibility, and recoverability and that control is best established by developing security constraints versus attempting to find every vulnerability. ...CSSEP identifies the major functions needed to do effective aircraft cybersecurity and provides a flexible framework as the “missing link” to connect the strategic and tactical levels of aircraft cybersecurity.
Training / Education

DO-326A and ED-202A An Introduction to the New and Mandatory Aviation Cyber-Security Essentials

The international standards D-326A (U.S.) and ED-202A (Europe) titled "Airworthiness Security Process Specification" are the cornerstones of the "DO-326/ED-202 Set" and they are the only Acceptable Means of Compliance (AMC) by FAA & EASA for aviation cyber-security airworthiness certification, as of 2019. The "DO-326/ED-202 Set" also includes companion documents DO-356A/ED-203A: "Airworthiness Security Methods and Considerations" & DO-355/ED-204: "Information Security Guidance for Continuing Airworthiness" (U.S. & Europe) and ED-201: "Aeronautical Information System Security (AISS) Framework Guidance" & ED-205: "Process Standard for Security Certification / Declaration of Air Traffic Management / Air Navigation Services (ATM/ANS) Ground Systems“ (Europe only).

Unmanned Systems (UxS) Control Segment (UCS) Architecture: Architecture Description

This document is the Architecture Description (AD) for the SAE Unmanned Systems (UxS) Control Segment (UCS) Architecture Library Revision A or, simply, the UCS Architecture. The architecture is expressed by a library of SAE publications as referenced herein. The other publications in the UCS Architecture Library Revision A are: AS6513A, AS6518A, AS6522A, and AS6969A.

Requirements for a COTS Assembly Management Plan

This document applies to the development of Plans for integrating and managing COTS assemblies in electronic equipment and Systems for the commercial, military, and space markets; as well as other ADHP markets that wish to use this document. For purposes of this document, COTS assemblies are viewed as electronic assemblies such as printed wiring assemblies, relays, disk drives, LCD matrices, VME circuit cards, servers, printers, laptop computers, etc. There are many ways to categorize COTS assemblies1, including the following spectrum: At one end of the spectrum are COTS assemblies whose design, internal parts2, materials, configuration control, traceability, reliability, and qualification methods are at least partially controlled, or influenced, by ADHP customers (either individually or collectively). An example at this end of the spectrum is a VME circuit card assembly.
SAE MOBILUS Subscription

Wiley Cyber Security Collection Add-On

As an annual subscription, the Wiley Cyber Security Collection Add-On is available for purchase along with one or both of the following: Wiley Aerospace Collection Wiley Automotive Collection The titles from the Wiley Cyber Security Collection are included in the SAE MOBILUS® eBook Package. Titles: Network Forensics Penetration Testing Essentials Security in Fixed and Wireless Networks, 2nd Edition The Network Security Test Lab: A Step-by-Step Guide Risk Centric Threat Modeling: Process for Attack Simulation and Threat Analysis Applied Cryptography: Protocols, Algorithms and Source Code in C, 20th Anniversary Edition Computer Security Handbook, Set, 6th Edition Threat Modeling: Designing for Security Other available Wiley collections: Wiley SAE MOBILUS eBook Package Wiley Aerospace Collection Wiley Automotive Collection Wiley Computer Systems Collection Add-On (purchasable with the Wiley Aerospace Collection and/or the Wiley Automotive Collection)

Standard Best Practices for System Safety Program Development and Execution

This document outlines a standard practice for conducting system safety. In some cases, these principles may be captured in other standards that apply to specific commodities such as commercial aircraft and automobiles. For example, those manufacturers that produce commercial aircraft should use SAE ARP4754 or SAE ARP4761 (see Section 2 below) to meet FAA or other regulatory agency system safety-related requirements. The system safety practice as defined herein provides a consistent means of evaluating identified risks. Mishap risk should be identified, evaluated, and mitigated to a level as low as reasonably practicable. The mishap risk should be accepted by the appropriate authority and comply with federal (and state, where applicable) laws and regulations, executive orders, treaties, and agreements. Program trade studies associated with mitigating mishap risk should consider total life cycle cost in any decision.

New university-led Air Force Center of Excellence focuses on securing autonomous systems operating in contested environments

The researchers at the COE for Assured Autonomy in Contested Environments – all of which histories of innovation for Department of Defense problems of interest – will focus on the availability, integrity, and effective use of information by leveraging its diverse expertise in dynamics, mathematics, control theory, information theory, communications, and computer science.


Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality

Autonomous Technologies: Applications That Matter

Over the years, the DARPA Challenges in the United States have galvanized interest in autonomous cars, making them a real possibility in the mind of the public, but autonomous and unmanned vehicles have been increasingly employed in many roles on land, in the water, and in the air. Military applications have received a great deal of attention, with weaponized unmanned aircraft (drones) being the most prominent. However, unmanned vehicles with varying degrees of autonomy already have many civilian applications. Some of these are quite familiar (such as the Roomba autonomous vacuum cleaner), while others remain largely out of the public eye (such as autonomous farm equipment). Additional applications and more capable vehicles are rapidly coming to the markets in the years ahead. This book examines a number of economically important areas in which unmanned and autonomous vehicles, also understood here as autonomous technologies, are already used or soon will be.

SAE International anti-counterfeit standards integral to obsolescence management

Counterfeit parts prevention is integral to an effective obsolescence management plan, and the focus of anti-counterfeit standards – including Counterfeit Avoidance Standard (AS5553) and Counterfeit Detection Standard (AS6081) – from SAE International in Warrendale, Pa. SAE International officials are bringing the anti-counterfeit discussion and sharing best practices, which include adherence to critical standards, to the Future of Obsolescence Management (FOM) event on October 10 and 11 in Washington.

Nvidia partners with AdaCore to secure self-driving firmware

As mobility software becomes increasingly complex and connected, so does the risk of human error and system safety. To combat this, New York-based software company AdaCore will work with Nvidia Corporation of Santa Clara, California to apply open-source Ada and SPARK programming languages for select software security firmware elements in highly-complex, safety-critical systems like Nvidia’s DRIVE AGX automated and autonomous vehicle solutions.

Air mobility innovations take center stage at Aerospace Systems and Technology Conference 2018

Hundreds of aerospace executives, engineers, scientists, and academics are gathering in London this week for Aerospace Systems and Technology Conference (ASTC) 2018 from SAE International in Warrendale, Pennsylvania. Discussions during the three-day industry event center on the theme of innovating air mobility. Aerospace thought leaders are at ASTC discussing current challenges, the latest enabling technologies, and future opportunities, including those related to urban air mobility (UAM) and supersonic aircraft.

AIA predicts flying air taxis, supersonic air travel, and space industry for 2050

In the “What’s Next for Aerospace and Defense: A Vision for 2050” study, AIA, New York City-based McKinsey & Company, and other industry partners reveal a comprehensive 30-year, Industry 4.0 forecast of air travel and spaceflight based on improvements in automation and digitization, next-generation materials, alternative energy sources and storage, and increased data throughput.