Refine Your Search

Topic

Search Results

Viewing 1 to 16 of 16
Article

Challenges ahead: cybersecurity and the aerospace supply chain

2018-07-24
Supply chains, now being targeted as a pathway to the vital core of organizations around the world, have become a vital part of the industry’s cybersecurity strategy, says Kirsten Koepsel, author of SAE International’s latest book, The Aerospace Supply Chain and Cyber Security – Challenges Ahead, now available.
Article

Lockheed Martin rolls out cybersecurity standardization model

2019-08-23
Lockheed Martin Corporation cyber security experts have released a new Cyber Resiliency Level (CRL) model. CRL a risk-based, mission-focused and cost-conscious framework that provides a structured set of methodologies and processes to help measure risk across six categories.
Article

SAE course delivers an introduction to the latest aviation cybersecurity essentials

2019-06-11
SAE International’s two-day course, DO-326A and ED-202A: An Introduction to the New and Mandatory Aviation Cyber-Security Essentials, introduces attendees to industry best practices for real-world aviation cybersecurity risk assessment, development, assurance. ...SAE International’s two-day course, DO-326A and ED-202A: An Introduction to the New and Mandatory Aviation Cyber-Security Essentials, introduces attendees to industry best practices for real-world aviation cybersecurity risk assessment, development, assurance.
Technical Paper

Information Security Risk Management of Vehicles

2018-04-03
2018-01-0015
The results of this work is allowed to identify a number of cybersecurity threats of the automated security-critical automotive systems, which reduces the efficiency of operation, road safety and system safety. ...According to the evaluating criterion of board electronics, the presence of poorly-protected communication channels, the 75% of the researched modern vehicles do not meet the minimum requirements of cybersecurity due to the danger of external blocking of vital systems. The revealed vulnerabilities of the security-critical automotive systems lead to the necessity of developing methods for mechanical and electronic protection of the modern vehicle. ...The law of normal distribution of the mid-points of the expert evaluation of the cyber-security of a modern vehicle has been determined. Based on the system approach, ranking of the main cybersecurity treats is performed.
Standard

Requirements for a COTS Assembly Management Plan

2020-08-03
CURRENT
EIA933C
This document applies to the development of Plans for integrating and managing COTS assemblies in electronic equipment and Systems for the commercial, military, and space markets; as well as other ADHP markets that wish to use this document. For purposes of this document, COTS assemblies are viewed as electronic assemblies such as printed wiring assemblies, relays, disk drives, LCD matrices, VME circuit cards, servers, printers, laptop computers, etc. There are many ways to categorize COTS assemblies1, including the following spectrum: At one end of the spectrum are COTS assemblies whose design, internal parts2, materials, configuration control, traceability, reliability, and qualification methods are at least partially controlled, or influenced, by ADHP customers (either individually or collectively). An example at this end of the spectrum is a VME circuit card assembly.
Book

Commercial Aviation and Cyber Security: A Critical Intersection

2016-12-22
As cyber attacks become more frequent at all levels, the commercial aviation industry is gearing up to respond accordingly. Commercial Aviation and Cyber Security: A Critical Intersection is a timely contribution to those responsible for keeping aircraft and infrastructure safe. It covers areas of vital interest such as aircraft communications, next-gen air transportation systems, the impact of the Internet of Things (IoT), regulations, the efforts being developed by the Federal Aviation Administration (FAA), and other regulatory bodies. The book also collects important information on the best practices already adopted by other industries such as utilities, defense and the National Highway Traffic Safety Administration in the US. It equally addresses risk management, response plans to cyber attacks, managing supply chains and their cyber- security flaws, personnel training, and the sharing of information among industry players.
SAE MOBILUS Subscription

Wiley Cyber Security Collection Add-On

2018-03-23
As an annual subscription, the Wiley Cyber Security Collection Add-On is available for purchase along with one or both of the following: Wiley Aerospace Collection Wiley Automotive Collection The titles from the Wiley Cyber Security Collection are included in the SAE MOBILUS® eBook Package. Titles: Network Forensics Penetration Testing Essentials Security in Fixed and Wireless Networks, 2nd Edition The Network Security Test Lab: A Step-by-Step Guide Risk Centric Threat Modeling: Process for Attack Simulation and Threat Analysis Applied Cryptography: Protocols, Algorithms and Source Code in C, 20th Anniversary Edition Computer Security Handbook, Set, 6th Edition Threat Modeling: Designing for Security Other available Wiley collections: Wiley SAE MOBILUS eBook Package Wiley Aerospace Collection Wiley Automotive Collection Wiley Computer Systems Collection Add-On (purchasable with the Wiley Aerospace Collection and/or the Wiley Automotive Collection)
Standard

Standard Best Practices for System Safety Program Development and Execution

2018-11-19
WIP
GEIASTD0010B
This document outlines a standard practice for conducting system safety. In some cases, these principles may be captured in other standards that apply to specific commodities such as commercial aircraft and automobiles. For example, those manufacturers that produce commercial aircraft should use SAE ARP4754 or SAE ARP4761 (see Section 2 below) to meet FAA or other regulatory agency system safety-related requirements. The system safety practice as defined herein provides a consistent means of evaluating identified risks. Mishap risk should be identified, evaluated, and mitigated to a level as low as reasonably practicable. The mishap risk should be accepted by the appropriate authority and comply with federal (and state, where applicable) laws and regulations, executive orders, treaties, and agreements. Program trade studies associated with mitigating mishap risk should consider total life cycle cost in any decision.
Research Report

Unsettled Topics in the Application of Satellite Navigation to Air Traffic Management

2020-05-27
EPR2020010
Contemporary air traffic management (ATM) challenges are both (1) acute and (2) growing at rates far outpacing established ways for absorbing technological innovation. Lack of timely response will guarantee failure to meet demands. Immediately that creates a necessity to identify means of coping and judging new technologies based on possible speed of adoption. Paralleling the challenges are developments in capability, both recent and decades old. Some steps (e.g., Global Positioning System (GPS) backup) are well known and, in fact, should have progressed further long ago. Others (e.g., sharing raw measurements instead of position fixes) are equally well known and, if followed by further flight tests initiated (and successful) years ago, would have produced a wealth of in-flight experience by now if development had continued. Other possibilities (e.g., automated pilot override) are much less common and are considered largely experimental.
Magazine

MOMENTUM: SEPTEMBER 2017

2017-09-01
Knowledge wins at 2017 Formula SAE Lincoln The University of Pennsylvania and Texas A&M win the Electric and Internal Combustion Classes, respectively. Flying high at SAE Aero Design New for the twin 2017 competitions in Texas and Florida was a requirement for planes registered in the Regular Class to carry "passengers." Pedal to the metal at Formula SAE Michigan More than 100 university teams compete in this premier student racecar design competition combining static and dynamic events. Removing bumps on the path to fully automated driving Inaugural workshop for new AutoDrive Challenge student competition held at SAE World Headquarters.
Magazine

MOBILITY ENGINEERING

2016-12-01
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
Article

Nvidia partners with AdaCore to secure self-driving firmware

2019-02-14
As mobility software becomes increasingly complex and connected, so does the risk of human error and system safety. To combat this, New York-based software company AdaCore will work with Nvidia Corporation of Santa Clara, California to apply open-source Ada and SPARK programming languages for select software security firmware elements in highly-complex, safety-critical systems like Nvidia’s DRIVE AGX automated and autonomous vehicle solutions.
Article

SAE International anti-counterfeit standards integral to obsolescence management

2018-07-25
Counterfeit parts prevention is integral to an effective obsolescence management plan, and the focus of anti-counterfeit standards – including Counterfeit Avoidance Standard (AS5553) and Counterfeit Detection Standard (AS6081) – from SAE International in Warrendale, Pa. SAE International officials are bringing the anti-counterfeit discussion and sharing best practices, which include adherence to critical standards, to the Future of Obsolescence Management (FOM) event on October 10 and 11 in Washington.
Article

Air mobility innovations take center stage at Aerospace Systems and Technology Conference 2018

2018-11-06
Hundreds of aerospace executives, engineers, scientists, and academics are gathering in London this week for Aerospace Systems and Technology Conference (ASTC) 2018 from SAE International in Warrendale, Pennsylvania. Discussions during the three-day industry event center on the theme of innovating air mobility. Aerospace thought leaders are at ASTC discussing current challenges, the latest enabling technologies, and future opportunities, including those related to urban air mobility (UAM) and supersonic aircraft.
Article

Virtual factories accelerate collaboration, advance technologies

2019-08-26
The Commonwealth Center for Advanced Manufacturing (CCAM), a non-profit consortium based in Prince George County, Virginia, uses a 3D visualization lab to expand beyond the walls of its 62,000-square-foot brick and mortar facility and deliver a collaborative development for researchers in industry, academia, and government.
Article

Automation streamlines accreditation to speed aerospace and defense technology deployment

2018-12-07
Automated software tools are eliminating weeks, if not months, from the Risk Management Framework (RMF) accreditation process by virtually eliminating the time of the initial hardening while also providing the required documentation. By doing so, technology integrators can significantly reduce the time to build, test, and deploy new technologies in Security Technical Implementation Guide (STIG)-compliant environments.
X