Refine Your Search

Topic

Search Results

Journal Article

(R)evolution of E/E Architectures

2015-04-14
2015-01-0196
Functionalities such as automated driving, connectivity and cyber-security have gained increasing importance over the past few years. The importance of these functionalities will continue to grow as these cutting-edge technologies mature and market acceptance increases.
Technical Paper

Cyber Security in the Automotive Domain – An Overview

2017-03-28
2017-01-1652
Driven by the growing internet and remote connectivity of automobiles, combined with the emerging trend to automated driving, the importance of security for automotive systems is massively increasing. Although cyber security is a common part of daily routines in the traditional IT domain, necessary security mechanisms are not yet widely applied in the vehicles. At first glance, this may not appear to be a problem as there are lots of solutions from other domains, which potentially could be re-used. But substantial differences compared to an automotive environment have to be taken into account, drastically reducing the possibilities for simple reuse. Our contribution is to address automotive electronics engineers who are confronted with security requirements. Therefore, it will firstly provide some basic knowledge about IT security and subsequently present a selection of automotive specific security use cases.
Technical Paper

Trust-Based Control and Scheduling for UGV Platoon under Cyber Attacks

2019-04-02
2019-01-1077
Unmanned ground vehicles (UGVs) may encounter difficulties accommodating environmental uncertainties and system degradations during harsh conditions. However, human experience and onboard intelligence can may help mitigate such cases. Unfortunately, human operators have cognition limits when directly supervising multiple UGVs. Ideally, an automated decision aid can be designed that empowers the human operator to supervise the UGVs. In this paper, we consider a connected UGV platoon under cyber attacks that may disrupt safety and degrade performance. An observer-based resilient control strategy is designed to mitigate the effects of vehicle-to-vehicle (V2V) cyber attacks. In addition, each UGV generates both internal and external evaluations based on the platoons performance metrics. A cloud-based trust-based information management system collects these evaluations to detect abnormal UGV platoon behaviors.
Standard

Hardware Protected Security for Ground Vehicles

2020-02-10
CURRENT
J3101_202002
Access mechanisms to system data and/or control is a primary use case of the hardware protected security environment (hardware protected security environment) during different uses and stages of the system. The hardware protected security environment acts as a gatekeeper for these use cases and not necessarily as the executor of the function. This section is a generalization of such use cases in an attempt to extract common requirements for the hardware protected security environment that enable it to be a gatekeeper. Examples are: Creating a new key fob Re-flashing ECU firmware Reading/exporting PII out of the ECU Using a subscription-based feature Performing some service on an ECU Transferring ownership of the vehicle Some of these examples are discussed later in this section and some have detailed sections of their own. This list is by no means comprehensive.
Technical Paper

Communication Requirements for Plug-In Electric Vehicles

2011-04-12
2011-01-0866
This paper is the second in the series of documents designed to record the progress of a series of SAE documents - SAE J2836™, J2847, J2931, & J2953 - within the Plug-In Electric Vehicle (PEV) Communication Task Force. This follows the initial paper number 2010-01-0837, and continues with the test and modeling of the various PLC types for utility programs described in J2836/1™ & J2847/1. This also extends the communication to an off-board charger, described in J2836/2™ & J2847/2 and includes reverse energy flow described in J2836/3™ and J2847/3. The initial versions of J2836/1™ and J2847/1 were published early 2010. J2847/1 has now been re-opened to include updates from comments from the National Institute of Standards Technology (NIST) Smart Grid Interoperability Panel (SGIP), Smart Grid Architectural Committee (SGAC) and Cyber Security Working Group committee (SCWG).
Journal Article

Cyberattacks and Countermeasures for Intelligent and Connected Vehicles

2019-10-14
Abstract ICVs are expected to make the transportation safer, cleaner, and more comfortable in the near future. However, the trend of connectivity has greatly increased the attack surfaces of vehicles, which makes in-vehicle networks more vulnerable to cyberattacks which then causes serious security and safety issues. In this article, we therefore systematically analyzed cyberattacks and corresponding countermeasures for in-vehicle networks of intelligent and connected vehicles (ICVs). Firstly, we analyzed the security risk of ICVs and proposed an in-vehicle network model from a hierarchical point of view. Then, we discussed possible cyberattacks at each layer of proposed network model.
Technical Paper

Test Method for the SAE J3138 Automotive Cyber Security Standard

2020-04-14
2020-01-0142
This paper will provide an Overview of Automotive Cyber Security Standards related to the Vehicle OBD-II Data Link. The OBD-II Connector Attack Tree is described with respect to the SAE J3138 requirements for Intrusive vs. non-Intrusive Services. A proposed test method for SAE J3138 is described including hardware and software scripting. Finally, example test results are reviewed and compared with a potential threat boundary.
Journal Article

Data Privacy in the Emerging Connected Mobility Services: Architecture, Use Cases, Privacy Risks, and Countermeasures

2019-10-14
Abstract The rapid development of connected and automated vehicle technologies together with cloud-based mobility services is transforming the transportation industry. As a result, huge amounts of consumer data are being collected and utilized to provide personalized mobility services. Using big data poses serious challenges to data privacy. To that end, the risks of privacy leakage are amplified by data aggregations from multiple sources and exchanging data with third-party service providers, in face of the recent advances in data analytics. This article provides a review of the connected vehicle landscape from case studies, system characteristics, and dataflows. It also identifies potential challenges and countermeasures.
Best Practice

Guidelines for Mobility Data Sharing Governance and Contracting

2020-04-08
CURRENT
MDC00001202004
Digitally enabled mobility vehicles and services, including dockless bikesharing and electric scooter sharing, are generating and collecting a growing amount of mobility data. Mobility data holds great potential to support transportation officials and their efforts to manage the public right-of-way, but the unlimited distribution of mobility data carries untested risks to privacy and public trust. The Mobility Data Collaborative™ has identified the need to improve and coordinate understanding among all parties around foundational policy and legal issues to support mobility data sharing, including privacy and contracting. The guidelines are geared towards supporting a scalable mobility data sharing framework that aligns the interests of the public and private sectors while addressing privacy, transparency, data ownership, and consumer trust.
Technical Paper

Securing J1939 Communications Using Strong Encryption with FIPS 140-2

2017-03-28
2017-01-0020
Since 2001, all sensitive information of U.S. Federal Agencies has been protected by strong encryption mandated by the Federal Information Processing Standards (FIPS) 140-2 Security Requirements. The requirements specify a formal certification process. The process ensures that validated encryption modules have implemented the standard, and have passed a rigorous testing and review processes. Today, this same strong security protection has become possible for vehicle networks using modern, cost-effective encryption in hardware. This paper introduces the motivation and context for the encryption diagnostics security in terms of all vehicles in general, not just trucks which use SAE J1939 communications. Several practical scenarios for using such encryption hardware and the advantages of using hardware compared to software private-key encryption and public-key encryption are described.
Technical Paper

Vehicle E/E Architecture and Its Adaptation to New Technical Trends

2019-04-02
2019-01-0862
With the ever-increasing requirements on vehicle performance, as well as the trend of vehicle becoming an integral part of a much bigger ecosystem involving automated driving, intelligent transportation and smart city, more and more electrical/electronic (E/E) systems are integrated in vehicles. Vehicle E/E architecture being the fundamental organization of E/E components, the relationship among the components and with the environment, as well as the principles guiding the design and evolution, has essential influences on vehicle E/E system functions and performance. This paper gives the definition of vehicle E/E architecture and provides different views. The guidelines, contents and process of E/E architecture design are discussed. The evolution of E/E architecture, influence of the latest technical trends including electrification, automated driving, and connectivity functions on E/E architecture, and how vehicle E/E architecture adapts to the technical trends are studied.
Research Report

Unsettled Topics Concerning Sensors for Automated Road Vehicles

2018-10-18
EPR2018001
This SAE EDGE™ Research Report identifies key unsettled issues of interest to the automotive industry regarding the new generation of sensors designed for vehicles capable of automated driving. Four main issues are outlined that merit immediate interest: First, specifying a standardized terminology and taxonomy to be used for discussing the sensors required by automated vehicles. Second, generating standardized tests and procedures for verifying, simulating, and calibrating automated driving sensors. Third, creating a standardized set of tools and methods to ensure the security, robustness, and integrity of data collected by such sensors. The fourth issue, regarding the ownership and privacy of data collected by automated vehicle sensors, is considered only briefly here since its scope far exceeds the technical issues that are the primary focus of the present report. SAE EDGE™ Research Reports are preliminary investigations of new technologies.
Technical Paper

Communication between Plug-in Vehicles and the Utility Grid

2010-04-12
2010-01-0837
This paper is the first in a series of documents designed to record the progress of the SAE J2293 Task Force as it continues to develop and refine the communication requirements between Plug-In Electric Vehicles (PEV) and the Electric Utility Grid. In February, 2008 the SAE Task Force was formed and it started by reviewing the existing SAE J2293 standard, which was originally developed by the Electric Vehicle (EV) Charging Controls Task Force in the 1990s. This legacy standard identified the communication requirements between the Electric Vehicle (EV) and the EV Supply Equipment (EVSE), including off-board charging systems necessary to transfer DC energy to the vehicle. It was apparent at the first Task Force meeting that the communications requirements between the PEV and utility grid being proposed by industry stakeholders were vastly different in the type of communications and messaging documented in the original standard.
Magazine

Automotive Engineering: October 6, 2015

2015-10-06
2016 Malibu sheds 300 lb, adds new hybrid system More wheelbase, style, fuel economy, and comfort aim to move GM's volume midsize sedan from the sidelines to the fast lane. Lighter, more powerful 2016 Honda Pilot The third-generation SUV gets a sleek new look and plenty of slick technology for enhanced performance and safety. 2016 Mazda MX-5 stays true to its roots Mazda engineers give the industry a lesson in getting more from less. 2016 Land Rover Discovery Sport spearheads more efficient Land Rovers JLR's space-efficient, flexible SUV moves to JLR's new Ingenium modular engines. Audi chooses high technology, cautious design evolution for new A4 In addition to lighter weight and significant improvements in efficiency, the new car employs plenty of technology and driver support.
Magazine

Automotive Engineering: November 3, 2016

2016-11-03
SAE Convergence 2016 Talk of the healthy aspects of disruption mingles with SAE's renowned technical emphasis to foster the auto industry's continuing evolution toward electrification and autonomy. The Battery Man Speaks The speed of progress in automotive lithium batteries has impressed AABC's Dr. Menahem Anderman. So has silicon-graphite anode technology development from Tesla and Panasonic. Industry 4.0: The smart factory arrives The plants that produce automotive systems and vehicles are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. Editorial: Promise of 48 volts is no shock Nissan unveils variable-compression-ratio ICE for 2018 Infiniti production model Optimizing engine oil warm-up strategies for 'real-world' driving In search of higher-energy-content batteries Making Multiphysics fast and convenient I.D.
Technical Paper

Analyze This! Sound Static Analysis for Integration Verification of Large-Scale Automotive Software

2019-04-02
2019-01-1246
Safety-critical embedded software has to satisfy stringent quality requirements. One such requirement, imposed by all contemporary safety standards, is that no critical run-time errors must occur. Runtime errors can be caused by undefined or unspecified behavior of the programming language; examples are buffer overflows or data races. They may cause erroneous or erratic behavior, induce system failures, and constitute security vulnerabilities. A sound static analyzer reports all such defects in the code, or proves their absence. Sound static program analysis is a verification technique recommended by ISO/FDIS 26262 for software unit verification and for the verification of software integration. In this article we propose an analysis methodology that has been implemented with the static analyzer Astrée. It supports quick turn-around times and gives highly precise whole-program results.
Magazine

Autonomous Vehicle Engineering: September 2019

2019-09-05
Editorial The new 'face' of privacy The Navigator No trust in AI systems without data protection Innovation Nation In the mobility space, Israel is rivaling Silicon Valley for smarts and start-ups - and beats it in chutzpah. Autonomy in your Face Biometric technology is deemed essential to ensuring AV driving safety and advancing the user experience-if privacy issues don't derail its deployment. About Face! To win acceptance, deployment of facial-recognition technology needs to fit within a picture-perfect consumer and legal framework that balances benefits with privacy protection. The Vehicle as Gaming Device Audi spin-off Holoride uses VR to turn the back seat into an entertainment platform. BlackBerry Tech Duo Sees Emergence of Vehicle-based Platforms Though likely to provide the OS of autonomy, BlackBerry also anticipates a larger shift to automobiles as software platforms.
Technical Paper

xEV Propulsion System Control-Overview and Current Trends

2021-04-06
2021-01-0781
Propulsion system control algorithms covering the functional needs of xEV propulsion (‘x’ donates P0-P4 configurations) systems are presented in this paper. The scope and foundation are based on generic well-established HEV controller architectures. However, unlike conventional HEV (series, parallel and power split) powertrains, the next generation of integrated electric propulsion configurations will utilize a single micro controller that supports multiple control functions ranging from the electric machines, inverters, actuators, clutch solenoids, coolant pumps, etc. This presents a unique challenge to architect control algorithms within the AUTOSAR framework while satisfying the complex timing requirements of motor/generator-inverter (MGi) control and increased interface definitions between software components to realize functional integration between the higher level propulsion system and its sub-systems.
Best Practice

AVSC Best Practice for Describing an Operational Design Domain: Conceptual Framework and Lexicon

2020-04-15
CURRENT
AVSC00002202004
An ADS-operated vehicle’s operational design domain (ODD) is defined by the manufacturer based on numerous factors. Research is underway at other organizations to define and organize ODD elements into taxonomies and other relational constructs. In order to enhance collaboration and communication between manufacturers and developers and transportation authorities, common terms and consistent frameworks are needed. The conceptual framework presented by Automated Vehicle Safety Consortium establishes a lexicon that can be used consistently by ADS developers and manufacturers responsible for defining their ADS ODD. A common framework and lexicon will reduce confusion, align expectations, and therefore build public trust, acceptance, and confidence.
Standard

Taxonomy and Definitions for Terms Related to Cooperative Driving Automation for On-Road Motor Vehicles

2020-05-07
CURRENT
J3216_202005
This document describes machine-to-machine (M2M) communication to enable cooperation between two or more participating entities or communication devices possessed or controlled by those entities. The cooperation supports or enables performance of the dynamic driving task (DDT) for a subject vehicle with driving automation feature(s) engaged. Other participants may include other vehicles with driving automation feature(s) engaged, shared road users (e.g., drivers of manually operated vehicles or pedestrians or cyclists carrying personal devices), or road operators (e.g., those who maintain or operate traffic signals or workzones). Cooperative driving automation (CDA) aims to improve the safety and flow of traffic and/or facilitate road operations by supporting the movement of multiple vehicles in proximity to one another. This is accomplished, for example, by sharing information that can be used to influence (directly or indirectly) DDT performance by one or more nearby road users.
X