Refine Your Search



Search Results

Technical Paper

Research on Vehicle Cybersecurity Based on Dedicated Security Hardware and ECDH Algorithm

Vehicle cybersecurity consists of internal security and external security. Dedicated security hardware will play an important role in car’s internal and external security communication. ...For certain AURIX MCU consisting of HSM, the experiment result shows that cheaper 32-bit HSM’s AES calculating speed is 25 times of 32-bit main controller, so HSM is an effective choice to realize cybersecurity. After comparing two existing methods that realize secure CAN communication, A Modified SECURE CAN scheme is proposed, and differences of the three schemes are analyzed.

OTA will drive cybersecurity programs

Connecting vehicles with the Internet means that cybersecurity is now a necessity that must be designed into nearly every piece of automotive hardware and software.
Training / Education

Introduction to Car Hacking with CANbus

Therefore, engineers should ensure that systems are designed free of unreasonable risks to motor vehicle safety, including those that may result due to existence of potential cybersecurity vulnerabilities. The automotive industry is making vehicle cybersecurity an organizational priority.

Permanently or Semi-Permanently Installed Diagnostic Communication Devices, Security Guidelines

The scope of the document is to define the cyber-security best practices to reduce interference with normal vehicle operation, or to minimize risk as to unauthorized access of the vehicle's control, diagnostic, or data storage system; access by equipment (i.e., permanently or semi-permanently installed diagnostic communication device, also known as dongle, etc.) which is either permanently or semi-permanently connected to the vehicle's OBD diagnostic connector, either SAE J1939-13, SAE J1962, or other future protocol; or hardwired directly to the in-vehicle network.
Technical Paper

Integrated Safety and Security Development in the Automotive Domain

The recently released SAE J3061 guidebook for cyber-physical vehicle systems provides high-level principles for automotive organizations for identifying and assessing cybersecurity threats and for designing cybersecurity aware systems in close relation to the ISO 26262 standard for the functional safety of road vehicles. ...., infotainment, car-2-car or car-2-infrastructure communication) as well as new advances toward advanced driver assistance systems (ADAS) or even autonomous driving functions make cybersecurity another key factor to be taken into account by vehicle suppliers and manufacturers. ...Although these can capitalize on experiences from many other domains, they still have to face several unique challenges when gearing up for specific cybersecurity challenges. A key challenge is related to the increasing interconnection of automotive systems with networks (such as Car2X).

Automotive Engineering: February 3, 2016

Baking in protection With vehicles joining the Internet of Things, connectivity is making cybersecurity a must-have obligation for automotive engineers, from initial designs through end-of-life.
Technical Paper

Secure Vehicular Communication Using Blockchain Technology

Also, all the existing methods for vehicular communication rely on a centralized server which itself invite massive cyber-security threats. These threats and challenges can be addressed by using the Blockchain (BC) technology, where each transaction is logged in a decentralized immutable BC ledger.
Training / Education

Introduction to Highly Automated Vehicles

Every year, the U.S. on average, experiences more than 34,000 traffic deaths and over 5 million vehicle crashes. While the trend in traffic deaths has been generally downward for the past decade, most of this reduction has been the result of optimizing passive occupant crash protection systems such as seatbelts and airbags. Highly automated vehicle's (HAV's) offer the potential to significantly reduce vehicle crashes by perceiving a dangerous situation before the crash has occurred and supporting the human driver with proactive warnings and in some cases active interventions to avoid or mitigate the crash.
Technical Paper

State of the Art Survey on Comparison of Physical Fingerprinting-Based Intrusion Detection Techniques for In-Vehicle Security

Controller area network (CAN) is used as a legacy protocol for in-vehicle communication. However, it lacks basic security features such as message authentication, integrity, confidentiality, etc., because the sender information in the message is missing. Hence, it is prone to different attacks like spoofing attacks, denial of service attacks, man in the middle and masquerade attacks. Researchers have proposed various techniques to detect and prevent these attacks, which can be split into two classes: (a) MAC-based techniques and (b) intrusion detection-based techniques. Further, intrusion detection systems can be divided into four categories: (i) message parameter- based, (ii) entropy-based, (iii) machine Learning-based and (iv) fingerprinting-based. This paper details state-of- the-art survey of fingerprinting-based intrusion detection techniques. In addition, the advantages and limitations of different fingerprinting-based intrusion detection techniques methods will be discussed.
Technical Paper

Cyber Security in the Automotive Domain – An Overview

Driven by the growing internet and remote connectivity of automobiles, combined with the emerging trend to automated driving, the importance of security for automotive systems is massively increasing. Although cyber security is a common part of daily routines in the traditional IT domain, necessary security mechanisms are not yet widely applied in the vehicles. At first glance, this may not appear to be a problem as there are lots of solutions from other domains, which potentially could be re-used. But substantial differences compared to an automotive environment have to be taken into account, drastically reducing the possibilities for simple reuse. Our contribution is to address automotive electronics engineers who are confronted with security requirements. Therefore, it will firstly provide some basic knowledge about IT security and subsequently present a selection of automotive specific security use cases.
Technical Paper

Safe and Secure Development: Challenges and Opportunities

The ever-increasing complexity and connectivity of driver assist functions pose challenges for both Functional Safety and Cyber Security. Several of these challenges arise not only due to the new functionalities themselves but due to numerous interdependencies between safety and security. Safety and security goals can conflict, safety mechanisms might be intentionally triggered by attackers to impact functionality negatively, or mechanisms can compete for limited resources like processing power or memory to name just some conflict potentials. But there is also the potential for synergies, both in the implementation as well as during the development. For example, both disciplines require mechanisms to check data integrity, are concerned with freedom from interference and require architecture based analyses. So far there is no consensus in the industry on how to best deal with these interdependencies in automotive development projects.
Journal Article

Exploiting Channel Distortion for Transmitter Identification for In-Vehicle Network Security

Abstract Cyberattacks on financial and government institutions, critical infrastructure, voting systems, businesses, modern vehicles, and so on are on the rise. Fully connected autonomous vehicles are more vulnerable than ever to hacking and data theft. This is due to the fact that the industry still relies on controller area network (CAN) protocol for in-vehicle control networks. The CAN protocol lacks basic security features such as message authentication, which makes it vulnerable to a wide range of attacks including spoofing attacks. This article presents a novel method to protect CAN protocol against packet spoofing, replay, and denial of service (DoS) attacks. The proposed method exploits physical uncolonable attributes in the physical channel between transmitting and destination nodes and uses them for linking the received packet to the source.
Technical Paper

Communication Requirements for Plug-In Electric Vehicles

This paper is the second in the series of documents designed to record the progress of a series of SAE documents - SAE J2836™, J2847, J2931, & J2953 - within the Plug-In Electric Vehicle (PEV) Communication Task Force. This follows the initial paper number 2010-01-0837, and continues with the test and modeling of the various PLC types for utility programs described in J2836/1™ & J2847/1. This also extends the communication to an off-board charger, described in J2836/2™ & J2847/2 and includes reverse energy flow described in J2836/3™ and J2847/3. The initial versions of J2836/1™ and J2847/1 were published early 2010. J2847/1 has now been re-opened to include updates from comments from the National Institute of Standards Technology (NIST) Smart Grid Interoperability Panel (SGIP), Smart Grid Architectural Committee (SGAC) and Cyber Security Working Group committee (SCWG).