Refine Your Search

Topic

Search Results

Technical Paper

Information Security Risk Management of Vehicles

2018-04-03
2018-01-0015
The results of this work is allowed to identify a number of cybersecurity threats of the automated security-critical automotive systems, which reduces the efficiency of operation, road safety and system safety. ...According to the evaluating criterion of board electronics, the presence of poorly-protected communication channels, the 75% of the researched modern vehicles do not meet the minimum requirements of cybersecurity due to the danger of external blocking of vital systems. The revealed vulnerabilities of the security-critical automotive systems lead to the necessity of developing methods for mechanical and electronic protection of the modern vehicle. ...The law of normal distribution of the mid-points of the expert evaluation of the cyber-security of a modern vehicle has been determined. Based on the system approach, ranking of the main cybersecurity treats is performed.
Magazine

Automotive Engineering: February 3, 2016

2016-02-03
Baking in protection With vehicles joining the Internet of Things, connectivity is making cybersecurity a must-have obligation for automotive engineers, from initial designs through end-of-life.
Magazine

Automotive Engineering: February 2017

2017-02-02
SAE Standards News VS committees fully engaged on cybersecurity. Honda's new 10-speed is a slick shifter SAE Level 3 'hand off' challenging AI researchers Lightweight door module aims to trim vehicle weight Exclusive first drive: Torotrak's V-Charge technology New 10-speed auto delights in 2017 Ford F-150 Power and more underscore 2018 Toyota Camry I.D.
Research Report

Unsettled Topics Concerning Sensors for Automated Road Vehicles

2018-10-18
EPR2018001
This SAE EDGE™ Research Report identifies key unsettled issues of interest to the automotive industry regarding the new generation of sensors designed for vehicles capable of automated driving. Four main issues are outlined that merit immediate interest: First, specifying a standardized terminology and taxonomy to be used for discussing the sensors required by automated vehicles. Second, generating standardized tests and procedures for verifying, simulating, and calibrating automated driving sensors. Third, creating a standardized set of tools and methods to ensure the security, robustness, and integrity of data collected by such sensors. The fourth issue, regarding the ownership and privacy of data collected by automated vehicle sensors, is considered only briefly here since its scope far exceeds the technical issues that are the primary focus of the present report. SAE EDGE™ Research Reports are preliminary investigations of new technologies.
Technical Paper

Foreseeable Misuse in Automated Driving Vehicles - The Human Factor in Fatal Accidents of Complex Automation

2017-03-28
2017-01-0059
Today, highly automated driving is paving the road for full autonomy. Highly automated vehicles can monitor the environment and make decisions more accurately and faster than humans to create safer driving conditions while ultimately achieving full automation to relieve the driver completely from participating in driving. As much as this transition from advanced driving assistance systems to fully automated driving will create frontiers for re-designing the in-vehicle experience for customers, it will continue to pose significant challenges for the industry as it did in the past and does so today. As we transfer more responsibility, functionality and control from human to machine, technologies become more complex, less transparent and making constant safe-guarding a challenge. With automation, potential misuse and insufficient system safety design are important factors that can cause fatal accidents, such as in TESLA autopilot incident.
Magazine

SAE Truck & Off-Highway Engineering: February 2018

2018-02-01
Electrification not a one-size-fits-all solution Efforts in the off-highway industry have been under way for decades, but the technology still faces implementation challenges. SuperTruck redux A year plus into phase two of the promising DOE program to dramatically improve freight efficiency, project leads from three of the participating truck OEMs share their progress thus far and technology paths moving forward. From research to reality Danfoss works closely with off-highway OEMs throughout the development process, testing and demonstrating machines packed with new technology features. Big Data a focus for 2018 SAE President Mircea Gradu Velodyne CQO sees use of Big Data as a way to capitalize on multiple industry trends including vehicle electrification and automated vehicles.
Magazine

SAE Off-Highway Engineering: December 2, 2016

2016-12-02
Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Expediting engine design Simulation tools drive development of the most complex, fuel- efficient and powerful engines ever seen in off-highway applications. Industry 4.0: The smart factory arrives The plants that produce vehicles and their high-tech systems are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. The future is not so far-off Enhanced Cat 3500 engine boosts power 20%, trims fuel usage by 10% Phase 2 GHG rules driver for advanced technology, alternative fuels Eaton demonstrates waste heat recovery, variable valve actuation for HD diesels Hyliion develops add-on hybrid system for semi-trailers that reduces fuel consumption by 30% Tech-heavy Iveco Z Truck concept spawns 29 patents EPA's Grundler talks Phase 2 regs
Magazine

Automotive Engineering: November 3, 2016

2016-11-03
SAE Convergence 2016 Talk of the healthy aspects of disruption mingles with SAE's renowned technical emphasis to foster the auto industry's continuing evolution toward electrification and autonomy. The Battery Man Speaks The speed of progress in automotive lithium batteries has impressed AABC's Dr. Menahem Anderman. So has silicon-graphite anode technology development from Tesla and Panasonic. Industry 4.0: The smart factory arrives The plants that produce automotive systems and vehicles are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. Editorial: Promise of 48 volts is no shock Nissan unveils variable-compression-ratio ICE for 2018 Infiniti production model Optimizing engine oil warm-up strategies for 'real-world' driving In search of higher-energy-content batteries Making Multiphysics fast and convenient I.D.
Book

Introduction to Advanced Manufacturing

2019-07-24
Introduction to Advanced Manufacturing was written by two experienced and passionate engineers whose mission is to make the subject of advanced manufacturing easy to understand and a practical solution to everyday problems. Harik, Ph.D. and Wuest, Ph.D., professors who have taught the subject for decades, combined their expertise to develop both an applied manual and a theoretical reference that addresses many different needs. Introduction to Advanced Manufacturing covers the following topics in detail: • Composites Manufacturing • Smart Manufacturing • Additive Manufacturing • Computer Aided Manufacturing • Polymers Manufacturing • Assembly Processes • Manufacturing Quality Control and Productivity • Subtractive Manufacturing • Deformative Manufacturing Introduction to Advanced Manufacturing offers a new, refreshing way of studying how things are made in the digital age.
Technical Paper

High Performance Processor Architecture for Automotive Large Scaled Integrated Systems within the European Processor Initiative Research Project

2019-04-02
2019-01-0118
Autonomous driving systems and connected mobility are the next big developments for the car manufacturers and their suppliers during the next decade. To achieve the high computing power needs and fulfill new upcoming requirements due to functional safety and security, heterogeneous processor architectures with a mixture of different core architectures and hardware accelerators are necessary. To tackle this new type of hardware complexity and nevertheless stay within monetary constraints, high performance computers, inspired by state of the art data center hardware, could be adapted in order to fulfill automotive quality requirements. The European Processor Initiative (EPI) research project tries to come along with that challenge for next generation semiconductors. To be as close as possible to series development needs for the next upcoming car generations, we present a hybrid semiconductor system-on-chip architecture for automotive.
Magazine

Automotive Engineering: April 7, 2015

2015-04-07
GM's CTO driving new paths to technology leadership 'We're making actual production commitments regarding our advanced-technology strategy, rather than just talking about it,' says GM's CTO Jon Lauckner. 'We're absolutely going to be among the leaders, if not the leader, in these areas.' Aluminum prepares for its next big leap Ford's F-Series blockbuster was just the beginning. New micromills now in pilot phase aim to bring vastly stronger and more formable light-alloy materials at higher capacity, says Alcoa's Mike Murphy. Slick solutions for friction reduction From new lubricants to 'smart' oil pumps and clever bearing technologies, engine designers are attacking every potential source of spin losses and internal friction in the quest for more mechanical work out of less fuel. Next-gen NSX: a twin-turbo, multi-material Ferrari-fighter The production NSX made its much-awaited global debut at NAIAS in January.
Magazine

Automotive Engineering: February 3, 2015

2015-02-03
Getting a grip on AWD efficiency The safety and performance benefits of all-wheel drive are undeniable, but so are the penalties of added weight, friction losses, and complexity. Clever axle disconnects and E-axles are driving future AWD developments. E pluribus unum Inputs from many sensors are being combined to give safety systems a true vision of vehicle surroundings, with the resulting sensor fusion becoming a mainstay of autonomous vehicle electronics. Lightweighting poses repair challenges Mass-produced aluminum bodies and mixed-material structures present challenges for assembly and repair, as automakers increasingly pursue these lightweight strategies. Setting the standard Meggitt CTO Emeritus begins term at helm of SAE International, seeks to encourage cross-sector relations, elevate image of SAE as aerospace industry leader.
Magazine

Mobility Engineering: September 2015

2015-09-01
The advent of stop-start technology As environmental concerns grow for R&D teams, OEMs look to bring the strategy further into the mainstream. Recycling opportunities for hybrid/electric vehicle lithium-ion batteries With limited reserves and strict environmental regulations, re-cyclers look to established extraction means to reuse, recycle, and dispose of the used batteries. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Getting right with composites With composites now a mainstay in most new aircraft de-signs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.
Magazine

MOMENTUM: FEBRUARY 2018

2018-02-01
The drive to success Gopher Motorsports at the University of Minnesota places special emphasis on reliability, with positive results ensuing. Technology designed to win École de technologie supérieure (ÉTS) student engineers developed an electronic continuously variable transmission that was the first of its kind used in Baja SAE competition. Big Data a focus for 2018 SAE President Mircea Gradu Velodyne CQO sees use of Big Data as a way to capitalize on multiple industry trends including vehicle electrification and automated vehicles.
Magazine

Automotive Engineering: July 7, 2016

2016-07-07
Technology report Quest for 'new-car smell' dictates interior-materials changes Doing it again-this time with 10 After a successful decade-long collaboration on 6-speed transaxles, Ford and GM partner again on an all-new 10-speed automatic. Here's a look inside the gearbox and the project. Large-scale additive manufacturing for rapid vehicle prototyping A case study from Oak Ridge National Laboratory bridges the 'powertrain-in-the-loop' development process with vehicle systems implementation using big area additive manufacturing (BAAM). Global Vehicles Steel-intensive Mazda CX-9 sheds mass, debuts novel turbo setup
Magazine

Automotive Engineering: November 2018

2018-11-01
Electrifying the two-wheeler Alta Motors, one of the newest electric motorcycle OEMs, is fueling zero-emission excitement with a passion for product. AV testing is for dummies Rapid development of automated vehicles is driving ATD innovations, as Humanetics' CEO explains. 2019 Yamaha Niken steers a radical path The world's first leaning three-wheel motorcycle is an expression not only of engineering prowess, but of a real passion for riding. Editorial Electrify the U.S. Postal Fleet!
Book

The Role of ISO 26262: Book 4 - Automated Vehicle Safety

2019-03-07
Safety has been ranked as the number one concern for the acceptance and adoption of automated vehicles since safety has driven some of the most complex requirements in the development of self-driving vehicles. Recent fatal accidents involving self-driving vehicles have uncovered issues in the way some automated vehicle companies approach the design, testing, verification, and validation of their products. Traditionally, automotive safety follows functional safety concepts as detailed in the standard ISO 26262. However, automated driving safety goes beyond this standard and includes other safety concepts such as safety of the intended functionality (SOTIF) and multi-agent safety. The Role of ISO 26262 addresses the concept of safety for self-driving vehicles through the inclusion of 10 recent and highly relevent SAE technical papers.
Book

Safety of the Intended Functionality: Book 3 - Automated Vehicle Safety

2019-03-07
Safety has been ranked as the number one concern for the acceptance and adoption of automated vehicles since safety has driven some of the most complex requirements in the development of self-driving vehicles. Recent fatal accidents involving self-driving vehicles have uncovered issues in the way some automated vehicle companies approach the design, testing, verification, and validation of their products. Traditionally, automotive safety follows functional safety concepts as detailed in the standard ISO 26262. However, automated driving safety goes beyond this standard and includes other safety concepts such as safety of the intended functionality (SOTIF) and multi-agent safety. Safety of the Intended Functionality (SOTIF) addresses the concept of safety for self-driving vehicles through the inclusion of 10 recent and highly relevent SAE technical papers. Topics that these papers feature include the system engineering management approach and redundancy technical approach to safety.
Magazine

Autonomous Vehicle Engineering: October 2018

2018-10-04
Editorial As autonomy and mobility merge LiDAR Giant 100 competitors want to eat his lunch, but Velodyne president Mike Jellen aims to maintain leadership in this fast-moving, trillion-dollar technology space. Rewriting the Code Renovo's Aware operating system for Automated Mobility on Demand (AMoD) is expanding its reach as more players see open-platform software as a unifying-and simplifying-answer to quicker and less-costly automated-vehicle deployment. Expanding the Role of FPGAs New demands for on-vehicle data processing, and over-the-air updating, are expanding the use of these programmable semicon-ductors in production vehicles. The recent Daimler-Xilinx linkup shows the way forward. Sly HMI Mitsubishi Electric sees 'hybrid haptics' and even your own vehicle-de-ployed drone as new methods to enhance the in-cabin experience.
X