Refine Your Search

Topic

Author

Search Results

Journal Article

(R)evolution of E/E Architectures

2015-04-14
2015-01-0196
Functionalities such as automated driving, connectivity and cyber-security have gained increasing importance over the past few years. The importance of these functionalities will continue to grow as these cutting-edge technologies mature and market acceptance increases.
Journal Article

A Centrally Managed Identity-Anonymized CAN Communication System*

2018-05-16
Abstract Identity-Anonymized CAN (IA-CAN) protocol is a secure CAN protocol, which provides the sender authentication by inserting a secret sequence of anonymous IDs (A-IDs) shared among the communication nodes. To prevent malicious attacks from the IA-CAN protocol, a secure and robust system error recovery mechanism is required. This article presents a central management method of IA-CAN, named the IA-CAN with a global A-ID, where a gateway plays a central role in the session initiation and system error recovery. Each ECU self-diagnoses the system errors, and (if an error happens) it automatically resynchronizes its A-ID generation by acquiring the recovery information from the gateway. We prototype both a hardware version of an IA-CAN controller and a system for the IA-CAN with a global A-ID using the controller to verify our concept.
Technical Paper

A Controller Area Network Bus Identity Authentication Method Based on Hash Algorithm

2021-07-14
2021-01-5077
With the development of vehicle intelligence and the Internet of Vehicles, how to protect the safety of the vehicle network system has become a focus issue that needs to be solved urgently. The Controller Area Network (CAN) bus is currently a very widely used vehicle-mounted bus, and its security largely determines the degree of vehicle-mounted information security. The CAN bus lacks adequate protection mechanisms and is vulnerable to external attacks such as replay attacks, modifying attacks, and so on. On the basis of the existing work, this paper proposes an authentication method that combines Hash-based Message Authentication Code (HMAC)-SHA256 and Tiny Encryption Algorithm (TEA) algorithms. This method is based on dynamic identity authentication in challenge/response made and combined with the characteristics of the CAN bus itself as it achieves the identity authentication between the gateway and multiple electronic control units (ECUs).
Technical Paper

A Safety and Security Testbed for Assured Autonomy in Vehicles

2020-04-14
2020-01-1291
Connectivity and autonomy in vehicles promise improved efficiency, safety and comfort. The increasing use of embedded systems and the cyber element bring with them many challenges regarding cyberattacks which can seriously compromise driver and passenger safety. Beyond penetration testing, assessment of the security vulnerabilities of a component must be done through the design phase of its life cycle. This paper describes the development of a benchtop testbed which allows for the assurance of safety and security of components with all capabilities from Model-in-loop to Software-in-loop to Hardware-in-loop testing. Environment simulation is obtained using the AV simulator, CARLA which provides realistic scenarios and sensor information such as Radar, Lidar etc. MATLAB runs the vehicle, powertrain and control models of the vehicle allowing for the implementation and testing of customized models and algorithms.
Journal Article

A Systematic Mapping Study on Security Countermeasures of In-Vehicle Communication Systems

2021-11-16
Abstract The innovations of vehicle connectivity have been increasing dramatically to enhance the safety and user experience of driving, while the rising numbers of interfaces to the external world also bring security threats to vehicles. Many security countermeasures have been proposed and discussed to protect the systems and services against attacks. To provide an overview of the current states in this research field, we conducted a systematic mapping study (SMS) on the topic area “security countermeasures of in-vehicle communication systems.” A total of 279 papers are identified based on the defined study identification strategy and criteria. We discussed four research questions (RQs) related to the security countermeasures, validation methods, publication patterns, and research trends and gaps based on the extracted and classified data. Finally, we evaluated the validity threats and the whole mapping process.
Standard

AIRCRAFT SERVER, COMMUNICATIONS, AND INTERFACE STANDARD

2021-11-10
CURRENT
ARINC679
ARINC Report 679 defines the functional characteristics of an airborne server that will support Electronic Flight Bags (EFBs) and similar peripherals used in the flight deck, cabin, and maintenance applications. The document defines how EFBs will efficiently, effectively, safely, and securely connect to the airborne server in a way that offer expanded capabilities to aircraft operators. The airborne server has two main functions, first to provide specific services to connected systems, and second to provide centralized security for the EFB and its data. This document is a functional airborne server definition. It does not define the physical characteristics of the server.
Magazine

Aerospace & Defense Technology: October 2020

2020-10-01
The Role of Autonomous Unmanned Ground Vehicle Technologies in Defense Applications Information Warfare - Staying Protected at the Edge Designing Connectivity Solutions for an Electric Aircraft Future Redesigning the Systems Engineering Process to Speed Development of E-Propulsion Aircraft Four RF Technology Trends You Need to Know for Satellite Communication Device Design Manufacturer Reduces Risk and Improves Quality of Military Radar Receivers Instrumentation for Fabrication and Testing of High-Speed Single-Rotor and Compound-Rotor Systems Precision data acquisition is required to generate a comprehensive set of measurements of the blade surface pressures, pitch link loads, hub loads, rotor wakes and performance of high-speed single-rotor and compound-rotor systems to support the development of next-generation rotorcraft.
Journal Article

Anomaly-Based Intrusion Detection Using the Density Estimation of Reception Cycle Periods for In-Vehicle Networks

2018-05-16
Abstract The automotive industry intends to create new services that involve sharing vehicle control information via a wide area network. In modern vehicles, an in-vehicle network shares information between more than 70 electronic control units (ECUs) inside a vehicle while it is driven. However, such a complicated system configuration can result in security vulnerabilities. The possibility of cyber-attacks on vehicles via external services has been demonstrated in many research projects. As advances in vehicle systems (e.g., autonomous drive) progress, the number of vulnerabilities to be exploited by cyber-attacks will also increase. Therefore, future vehicles need security measures to detect unknown cyber-attacks. We propose anomaly-based intrusion detection to detect unknown cyber-attacks for the Control Area Network (CAN) protocol, which is popular as a communication protocol for in-vehicle networks.
Technical Paper

Application of Suspend Mode to Automotive ECUs

2018-04-03
2018-01-0021
To achieve high robustness and quality, automotive ECUs must initialize from low-power states as quickly as possible. However, microprocessor and memory advances have failed to keep pace with software image size growth in complex ECUs such as in Infotainment and Telematics. Loading the boot image from non-volatile storage to RAM and initializing the software can take a very long time to show the first screen and result in sluggish performance for a significant time thereafter which both degrade customer perceived quality. Designers of mobile devices such as portable phones, laptops, and tablets address this problem using Suspend mode whereby the main processor and peripheral devices are powered down during periods of inactivity, but memory contents are preserved by a small “self-refresh” current. When the device is turned back “on”, fully initialized memory content allows the system to initialize nearly instantaneously.
Journal Article

Assuring Vehicle Update Integrity Using Asymmetric Public Key Infrastructure (PKI) and Public Key Cryptography (PKC)

2020-08-24
Abstract Over the past forty years, the Electronic Control Unit (ECU) technology has grown in both sophistication and volume in the automotive sector, and modern vehicles may comprise hundreds of ECUs. ECUs typically communicate via a bus-based network architecture to collectively support a broad range of safety-critical capabilities, such as obstacle avoidance, lane management, and adaptive cruise control. However, this technology evolution has also brought about risks: if ECU firmware is compromised, then vehicle safety may be compromised. Recent experiments and demonstrations have shown that ECU firmware is not only poorly protected but also that compromised firmware may pose safety risks to occupants and bystanders.
Magazine

Automotive Engineering: February 3, 2016

2016-02-03
Baking in protection With vehicles joining the Internet of Things, connectivity is making cybersecurity a must-have obligation for automotive engineers, from initial designs through end-of-life.
Magazine

Automotive Engineering: March 2018

2018-03-08
Truck Tech War! Ford, GM, and Ram arm their profit-pumping half-ton pickups for the 2020s' efficiency battle. Mobility mecca: WCX 2018 Provocative thought leaders, emerging disruptors, and the industry's best networking and career guidance all under one big roof: the 2018 SAE World Congress Experience is coming April 10-12. Mercedes adopts Harman UX for A-Class The 'smart' architecture is capable of OTA updates and features more-accurate voice recognition. Spark of genius Mazda's Skyactiv-X-the nexus of gasoline and diesel tech-remains on track for 2019 production. We test-drive recent prototypes to check development status. Taking aim at the drowsy-driver threat Hyundai Mobis is leveraging Level 4 tech to move 'departed' drivers safely off the road. Editorial: Fear and loathing on the path to Level 4 driving Supplier Eye Variability, risk and the value stream The Navigator How will automated vehicles deal with potholes?
Magazine

Automotive Engineering: November 2017

2017-11-02
700 miles, hands-free! GM's Super Cruise turns Cadillac drivers into passengers in a well-engineered first step toward greater vehicle autonomy. Toyota rethinks the Flagship The 2018 Lexus LS moves to twin-turbo V6 power and piles on the takumi. Honda 2018 Accord: Antidote for crossover fever The all-new, tenth-generation Accord is Honda's best-ever-and makes the case for why crossovers shouldn't take over the planet. Autonomy testing: Simulation to the rescue Autonomous technology development injects new rigors on vehicle-development testing.
Magazine

Automotive Engineering: October 6, 2015

2015-10-06
2016 Malibu sheds 300 lb, adds new hybrid system More wheelbase, style, fuel economy, and comfort aim to move GM's volume midsize sedan from the sidelines to the fast lane. Lighter, more powerful 2016 Honda Pilot The third-generation SUV gets a sleek new look and plenty of slick technology for enhanced performance and safety. 2016 Mazda MX-5 stays true to its roots Mazda engineers give the industry a lesson in getting more from less. 2016 Land Rover Discovery Sport spearheads more efficient Land Rovers JLR's space-efficient, flexible SUV moves to JLR's new Ingenium modular engines. Audi chooses high technology, cautious design evolution for new A4 In addition to lighter weight and significant improvements in efficiency, the new car employs plenty of technology and driver support.
Magazine

Automotive Engineering: October 6, 2016

2016-10-06
Steering Mazda's unique course A chassis engineer at heart, Chairman Seita Kanai challenges his engineers to think differently and embrace the Skyactiv technology that has made Mazda a benchmark. Delphi's multi-domain mindset From tackling the cyber threat to putting 48-volt hybrids with Dynamic Skip-Fire on the road, Engineering VP Mary Gustanski is harnessing a technology powerhouse. The evolving tire-development paradigm Advanced tire-simulation modeling allows tire development to keep pace with accelerated vehicle-development cycles. MEMS the word for next-gen HUDs New high-speed, quad-channel laser diode drivers are designed to beat the LCD and DLP incumbents for next-gen vehicle head-up displays.
Magazine

Autonomous Vehicle Engineering: March 2021

2021-03-04
Editorial SPAC attack The Navigator Mapping the way to safe and natural automated driving Motorcycles Enter the ADAS Age The latest models from BMW, Ducati and KTM feature Bosch's new ACC setup, but further advancements will require navigating critical rider-control strategies. On the Way to SVA Aptiv says its Smart Vehicle Architecture central controller is the key to simpler, more compact and higher-performance ADAS and AV systems. New Insistence for Driver Assistance Panelists at SAE International's 2021 Government/Industry Meeting say assisted-driving technology is worthwhile - but effective driver monitoring is crucial. Flash! Lidar's Next Generation Arrives Technology solutions from new players and alliances are poised to drive down cost. Horiba MIRA's Vision for World-Class AV Testing A new autonomous vehicle development center called Assured CAV boasts a lengthy list of assets and capabilities.
Magazine

Autonomous Vehicle Engineering: November 2019

2019-11-01
Editorial Bill Visnic: Expect the unexpected The Navigator Sam Abuelsamid: Separating illusion from magic in AV deployment The Road to Automobility The era of electrified, self-driving vehicles is upon us. Engineers are key to the transformation - with much hard work still to be done. Far and Away: Remote Drivers Monitor Autonomous Vehicles Remote operators are helping autonomous shuttles and other AVs navigate through complex situations. Mapping Canada - Centimeter by Centimeter A Montreal-based company leverages artificial intelligence to take on the task of developing high-definition maps of Canada. You've Lost That Queasy Feeling… Transcontinental research aims to understand the complex nature of motion sickness to help improve the automated-vehicle experience. 3D Sonar Sees Objects Overlooked by Costlier Sensors A dream of robotic fish inspires inexpensive automated-driving sensing technology that works for the critical areas close to the vehicle.
Magazine

Autonomous Vehicle Engineering: September 2021

2021-09-02
Editorial Fool Self-Driving II The Navigator What will result from NHTSA's Tesla Autopilot investigation? Data Drives Driverless Truck Launch Smart diagnostics and advanced validation help support the reliability metrics required to gain confidence that autonomous trucks are ready for the road. Peering into the Distance New sensors of all types look out longer distances - and provide higher resolutions - for engineers pushing ADAS capabilities and higher-level vehicle automation. Ford Drives into SAE Level 2 Driver monitoring was an essential component to engineering the new "hands-free" BlueCruise/Active Glide enhanced ADAS system. A Chore No More? The Detroit Smart Parking Lab opens to develop and test emerging parking technology in real-world settings. Share and Share Alike The concepts of rideshare and urban mobility continue to evolve as new projects test what's possible.
X