Refine Your Search

Topic

Search Results

Journal Article

A Centrally Managed Identity-Anonymized CAN Communication System*

2018-05-16
Abstract Identity-Anonymized CAN (IA-CAN) protocol is a secure CAN protocol, which provides the sender authentication by inserting a secret sequence of anonymous IDs (A-IDs) shared among the communication nodes. To prevent malicious attacks from the IA-CAN protocol, a secure and robust system error recovery mechanism is required. This article presents a central management method of IA-CAN, named the IA-CAN with a global A-ID, where a gateway plays a central role in the session initiation and system error recovery. Each ECU self-diagnoses the system errors, and (if an error happens) it automatically resynchronizes its A-ID generation by acquiring the recovery information from the gateway. We prototype both a hardware version of an IA-CAN controller and a system for the IA-CAN with a global A-ID using the controller to verify our concept.
Technical Paper

A Safety and Security Testbed for Assured Autonomy in Vehicles

2020-04-14
2020-01-1291
Connectivity and autonomy in vehicles promise improved efficiency, safety and comfort. The increasing use of embedded systems and the cyber element bring with them many challenges regarding cyberattacks which can seriously compromise driver and passenger safety. Beyond penetration testing, assessment of the security vulnerabilities of a component must be done through the design phase of its life cycle. This paper describes the development of a benchtop testbed which allows for the assurance of safety and security of components with all capabilities from Model-in-loop to Software-in-loop to Hardware-in-loop testing. Environment simulation is obtained using the AV simulator, CARLA which provides realistic scenarios and sensor information such as Radar, Lidar etc. MATLAB runs the vehicle, powertrain and control models of the vehicle allowing for the implementation and testing of customized models and algorithms.
Article

CICV, Marmara University and BigTRI Join the International Alliance for Mobility Testing & Standardization - Europe’s blockchain-based Smart E-Mobility Challenge will conclude this May in Germany

2019-05-07
TIoTA, an open software consortium of over 50 members organized to support the creation of a secure, scalable, interoperable, and trusted IoT ecosystem, began the E-Mobility Challenge to link IoT devices with consumers and stakeholder companies such as operators and service, communication, and payment providers within the preexisting European electric vehicle ecosystem.
Article

CICV, Marmara University and BigTRI Join the International Alliance for Mobility Testing & Standardization - Industry invited to participate in AeroTech aerospace and defense technical program

2021-09-14
SAE International is inviting global participation in its AeroTech® aerospace and defense technology conference and exhibition, which is for the first time co-located with ASM International’s AeroMat, at the Pasadena Convention Center in Pasadena, California, March 15 through 17, 2022.
Article

CICV, Marmara University and BigTRI Join the International Alliance for Mobility Testing & Standardization - MOBI rolls out the first blockchain-enabled Vehicle Identity (VID) mobility standard

2019-07-18
The Mobility Open Blockchain Initiative – a global nonprofit working to create standards in blockchain, distributed ledgers, and related technologies for consumers, smart cities, and mobility – has launched the industry's first vehicle identification (VID) standard incorporating blockchain technology into a digital vehicle identification system.
Article

CICV, Marmara University and BigTRI Join the International Alliance for Mobility Testing & Standardization - Nvidia partners with AdaCore to secure self-driving firmware

2019-02-14
As mobility software becomes increasingly complex and connected, so does the risk of human error and system safety. To combat this, New York-based software company AdaCore will work with Nvidia Corporation of Santa Clara, California to apply open-source Ada and SPARK programming languages for select software security firmware elements in highly-complex, safety-critical systems like Nvidia’s DRIVE AGX automated and autonomous vehicle solutions.
Article

CICV, Marmara University and BigTRI Join the International Alliance for Mobility Testing & Standardization - SAE International anti-counterfeit standards integral to obsolescence management

2018-07-25
Counterfeit parts prevention is integral to an effective obsolescence management plan, and the focus of anti-counterfeit standards – including Counterfeit Avoidance Standard (AS5553) and Counterfeit Detection Standard (AS6081) – from SAE International in Warrendale, Pa. SAE International officials are bringing the anti-counterfeit discussion and sharing best practices, which include adherence to critical standards, to the Future of Obsolescence Management (FOM) event on October 10 and 11 in Washington.
Article

CICV, Marmara University and BigTRI Join the International Alliance for Mobility Testing & Standardization - Virtual factories accelerate collaboration, advance technologies

2019-08-26
The Commonwealth Center for Advanced Manufacturing (CCAM), a non-profit consortium based in Prince George County, Virginia, uses a 3D visualization lab to expand beyond the walls of its 62,000-square-foot brick and mortar facility and deliver a collaborative development for researchers in industry, academia, and government.
Article

CICV, Marmara University and BigTRI Join the International Alliance for Mobility Testing & Standardization - WCX 2019: IAMTS association will establish standardization and testing for connected vehicles

2019-04-10
The China Automotive Technology and Research Center Co., Ltd. (CATARC), TÜV SÜD Group, and Shanghai SH Intelligent Automotive and International Transportation Innovation Center (ITIC) have joined with SAE International to establish the International Alliance for Mobility Testing and Standardization (IAMTS).
Article

CICV, Marmara University and BigTRI Join the International Alliance for Mobility Testing & Standardization - Wind River and Airbiquity partner to update autonomous and connected vehicle software through cloud-based, over-the-air technology

2019-06-04
Through this work, Wind River and Airbiquity look to enable secure and intelligent software updates and data management for these vehicles through over-the-air (OTA) programming technology. The work may also lead to similar solutions for traditional aerospace and unmanned aircraft system (UAS) industries.
Book

Commercial Aviation Cyber Security: Current State and Essential Reading

2016-12-31
In the next decade, commercial aviation will see Next Generation ATM (NextGEN), Single European Skies ATM Research (SESAR), and others utilizing Internet- based air-to-ground communication links for advanced “air traffic control” (ATC) communications. Commercial Aviation Cyber Security: Current State and Essential Reading highlights some of the major issues the industry must confront if the vision of a new, advanced air traffic management is to come to fruition. This will require standardization work to identify key components with built-in cyber security that will guide prototype testing, functionality, and prioritizing implementation efforts to solve the roadblocks to global interoperability. The ten technical papers selected for Commercial Aviation Cyber Security: Current State and Essential Reading span the last decade’s work in commercial aviation cyber security, and aircraft cyber technologies.
Standard

DATALINK SECURITY PART 2 - KEY MANAGEMENT

2008-03-10
CURRENT
ARINC823P2
The purpose of this document is to provide recommended guidance and provisions for ACARS Message Security (AMS) key management. The key management framework described herein is based on open international standards that are adapted to the ACARS datalink communications environment.
Standard

Data Security Services

2019-10-09
CURRENT
J1760_201910
The scope of this SAE Recommended Practice is to require the use of the same Security Services as defined by the International Standard ISO/CD 15764, modified by the Class of Security as determined by the resource provider and referenced in Table 1, Extended Data Link Security References.
Standard

Data Security Services

2001-12-26
HISTORICAL
J1760_200112
The scope of this SAE Recommended Practice is to require the use of the same Security Services as defined by the International Standard ISO/CD 15764, modified by the Class of Security as determined by the resource provider and referenced in Table 1, Extended Data Link Security References.
Standard

Digital Communications for Plug-in Electric Vehicles

2014-12-11
CURRENT
J2931/1_201412
This SAE Information Report SAE J2931 establishes the requirements for digital communication between Plug-In Electric Vehicles (PEV), the Electric Vehicle Supply Equipment (EVSE) and the utility or service provider, Energy Services Interface (ESI), Advanced Metering Infrastructure (AMI) and Home Area Network (HAN). This is the third version of this document and completes the effort that specifies the digital communication protocol stack between Plug-in Electric Vehicles (PEV) and the Electric Vehicle Supply Equipment (EVSE). The purpose of the stack outlined in Figure 1 and defined by Layers 3 to 6 of the OSI Reference Model (Figure 1) is to use the functions of Layers 1 and 2 specified in SAE J2931/4 and export the functionalities to Layer 7 as specified in SAE J2847/2 (as of August 1, 2012, revision) and SAE J2847/1 (targeting revision at the end of 2012).
X