Refine Your Search

Topic

Search Results

Technical Paper

Vehicle Acceleration Modeling in PC-Crash

2014-04-01
2014-01-0464
The research reported here offers a validation of this capability, demonstrating that PC-Crash can be used to realistically model the build-up of a vehicle's speed under maximal acceleration. ...In the research reported here, PC-Crash 9.0 was used to model the full-throttle acceleration capabilities of three vehicles with automatic transmissions - a 2006 Ford Crown Victoria Police Interceptor (CVPI), a 2000 Cadillac DeVille DTS, and a 2003 Ford F150. ...In each case, the full-throttle acceleration of the vehicles modeled in PC-Crash showed good agreement with the acceleration of the real vehicles in our road tests.
Technical Paper

A New Approach to Occupant Simulation Through the Coupling of PC-Crash and MADYMO

1999-03-01
1999-01-0444
During recent years the accident simulation program PC-Crash was developed. This software simulates vehicle movement before, during and after the impact, using 3D vehicle and scene models. ...A new interface has been developed between MADYMO® and PC-Crash so that, after the reconstruction of an accident, only a few additional parameters regarding restraint system, seat and occupant must be defined. ...A new interface has been developed between MADYMO® and PC-Crash so that, after the reconstruction of an accident, only a few additional parameters regarding restraint system, seat and occupant must be defined. PC-Crash then creates all necessary input files for MADYMO® and starts the occupant simulation.
Technical Paper

Application of the Monte Carlo Methods for Stability Analysis within the Accident Reconstruction Software PC-CRASH

2003-03-03
2003-01-0488
During recent years the accident simulation program PC-CRASH was developed, which allows simulating the vehicles movement before, during and after the impact. ...The first one serves as an alternative for the optimizer tool and is included in the current version of PC-Crash. It gives reasonable insight in the variation of certain parameters in reasonable calculation time.
Journal Article

Reconstructing Vehicle Dynamics from On-Board Event Data

2019-04-02
2019-01-0632
These predictions were generated by directly integrating the VCH data and by using the VCH data as inputs to PC-Crash simulations. The predicted positions and headings were then compared to the actual position and heading data measured using differential GPS synchronized to the VCH data record.
Technical Paper

Measuring and Modeling Suspensions of Passenger Vehicles

2013-04-08
2013-01-0774
Numerical parameters describing suspension stiffness and damping are required for 3D simulation of vehicle trajectories, but may not be available. This paper outlines a simple, portable method of measuring these properties with a coefficient of variation of 5% on stiffness. 24 of 26 vehicles tested were significantly stiffer in roll than pitch, complicating analyses with models that don't include anti-roll. Suspension parameters did not correlate with static wheel load distribution, and damping coefficient did not correlate with natural frequency. Computer simulations of the speed required to initiate rollover in an S-curve were highly sensitive to the suspension parameters used. When pre-impact tire marks and rollover distance were considered, the simulations became almost insensitive to suspension parameters.
Technical Paper

Challenges in Simulation and Sensor Development for Occupant Protection in Rollover Accidents

2000-11-01
2000-01-C038
Automotive occupant safety continues to evolve. At present this area has gathered a strong consumer interest which the vehicle manufacturers are tapping into with the introduction of many new safety technologies. Initially, individual passive devices and features such as seatbelts, knee- bolsters, structural crush zones, airbags etc., were developed for to help save lives and minimize injuries in accidents. Over the years, preventive measures such as improving visibility, headlights, windshield wipers, tire traction etc., were deployed to help reduce the probability of getting into an accident. With tremendous new research and improvements in electronics, we are at the stage of helping to actively avoid accidents in certain situations as well as providing increased protection to vehicle occupants and pedestrians.
Technical Paper

Essential Considerations in Delta-V Determination

2001-10-01
2001-01-3165
While Delta-V has been one of the most used indicators of accident severity for vehicle occupants, its actual determination remains a mystery to many who refer to it and use it. Delta-V is a term of art applied to a rapid change in vehicle velocity caused by impact forces during a collision. The Delta-V is associated with the high decelerations, which cause it and are applied to the occupants through restraint systems and collisions with the interior of the vehicle. This paper will serve as a primer for those new to the subject and a review for those who are familiar with the subject. Previous works by the authors will be referenced and other pertinent literature and data sources will be discussed. The analytical methods and test data used to calculate Delta-V will be presented and the relationship between Delta-V and other measures of impact severity, such as Barrier Equivalent Velocity and Energy Equivalent Speed will be discussed. The use of air bag sensor data will be included.
Technical Paper

Comparisons of Devices for Measuring Acceleration vs. Time in Braking Tests

2008-04-14
2008-01-0180
The coefficient of friction between a vehicle's tires and the roadway is a key parameter in any accident reconstruction. With the proliferation of vehicle dynamics software, it is often important to have more details regarding the tires interaction with the road than simply the average deceleration rate. Devices which can provide the peak friction as the braking develops, along with the average deceleration during the fully developed sliding phase, are necessary. There are now products widely available to the accident reconstruction market which provides these parameters as well as detailed acceleration vs. time curves. The following products capable of providing these results were tested: Accelerex, Vericom VC3000, and two general purpose accelerometers made by Silicon Designs and Dimension Engineering. Tests were conducted on wet and dry asphalt surfaces using a variety of passenger vehicles and transit buses which confirmed the agreement between these devices.
Technical Paper

Empirical Testing of Vehicular Rotational Motion

2012-04-16
2012-01-0602
Vehicles often rotate during traffic collisions due to impact forces or excessive steering maneuvers. In analyzing these situations, accident reconstructionists need to apply accurate deceleration rates for vehicles that are both rotating and translating to a final resting position. Determining a proper rate of deceleration is a challenging but critical step in calculating energy or momentum-based solutions for analytical purposes. In this research, multiple empirical tests were performed using an instrumented vehicle that was subjected to induced rotational maneuvers. A Ford Crown Victoria passenger car was equipped with a modified brake system where selected wheels could be isolated. The tests were performed on a dry asphalt surface at speeds of approximately 50 mph. In each of the tests, the vehicle rotated approximately 180 degrees with the wheels on one side being completely locked.
Technical Paper

The Accident Research Unit Hannover as Example for Importance and Benefit of Existing In Depth Investigations

1994-03-01
940712
The In-Depth Investigations of the Accident Research Unit Hannover (Germany), which have been carried out since 1973 are described in the paper. The importance of the detailed analysis consists in the method, in the statistical approach and the continuous data collection over the years. The government as well as industrial manufacturers use this data. Since 1985 a statistical procedure including a mathematical weighting procedure has been applied. About 1000 cases per year are collected. In the paper, principal aspects in the technique of data collection, definitions of variables and possibilities of data usage are described. The limitations of in-depth investigations are discussed in principle, and demands for a worldwide level are pointed out.
Journal Article

A Bayesian Approach to Cross-Validation in Pedestrian Accident Reconstruction

2011-04-12
2011-01-0290
In statistical modeling, cross-validation refers to the practice of fitting a model with part of the available data, and then using predictions of the unused data to test and improve the fitted model. In accident reconstruction, cross-validation is possible when two different measurements can be used to estimate the same accident feature, such as when measured skidmark length and pedestrian throw distance each provide an estimate of impact speed. In this case a Bayesian cross-validation can be carried out by (1) using one measurement and Bayes theorem to compute a posterior distribution for the impact speed, (2) using this posterior distribution to compute a predictive distribution for the second measurement, and then (3) comparing the actual second measurement to this predictive distribution. An actual measurement falling in an extreme tail of the predictive distribution suggests a weakness in the assumptions governing the reconstruction.
Technical Paper

Determination of Vehicle Velocities and Collision Location by Means of Monte Carlo Simulation Method

2006-04-03
2006-01-0907
In road accident analysis the problem of uncertainty of calculation results becomes essential particularly when modification of input values within the adopted ranges leads to diametric change of the answer to the question posed by the court of justice (e.g. “collision from the right-hand side of the center line” – “collision from the left-hand side of the center line”, or “the accident could have been avoided” – “the accident could not be avoided”). The aim of the paper was to present a method of collision reconstruction calculation using the principle of conservation of momentum, the principle of energy conservation, and the principle of kinetic energy and work equivalence (energy balance) (Marquard), taking into consideration Monte Carlo simulation method. The applicability of the method in determination of distribution function for vehicle collision velocities was proved and, what is more important, its practical uselessness in determination of collision location.
Technical Paper

Documenting Scientific Visualizations and Computer Animations Used in Collision Reconstruction Presentations

1998-02-23
980018
Scientific visualizations and computer animations are frequently presented to show the results of simulation models or the opinions of a reconstructionist. In these cases it is important to properly document the graphical images being presented. Proper documentation depends somewhat on the methodologies used to produce the images, but every scientific visualization, computer animation, and computer generated image should be documented sufficiently to allow others to duplicate the images. There are also some basic data that should accompany any computer generated images that will reveal the basis of the motion for all primary objects being depicted. This paper presents some basic definitions and outlines the data that is required to document scientific visualizations and computer animations.
Technical Paper

An Evaluation of Rectified Bitmap 2D Photogrammetry with PC-Rect

1997-02-24
970952
Without good-quality measurements taken at the time of an accident the analyst is faced with the need to extract measurement data from incident scene photographs. This paper discusses the history and development of the mathematical model for two-dimensional (2D) single exposure analytical photogrammetry, presents the software PC-Rect, and compares the analytical results obtained with PC-Rect to survey results. The sensitivity of the analytical results to the variation in such parameters as subject distance, camera height, digital photograph resolution, and bitmap density is discussed. The concept of using the directly rectified scanned photograph in the reconstruction task is introduced, and the utility of performing the dynamic simulation directly on the rectified photograph is discussed.
Technical Paper

An Investigation into C-NCAP AEB System Assessment Protocol

2017-09-23
2017-01-2009
In order to speed up the development of vehicle active safety technology in China, C-NCAP plans to add AEB and AEB VRU system as assessment items in 2018. With the purpose of studying the assessment protocol of AEB system, we have carried out 400,000 km road information collection and then we acquired the statistics of the operation conditions of dangerous situations. Combined with the traffic accident data collected by CIDAS, we found that the dangerous situations that we usually met were mainly three types, that was CCRs, CCRm and CCRb. Based on what we mentioned above, we analyzed the three kinds of working conditions and gave the corresponding evaluation method. In addition, combined with the actual situation of China, we added two tests of error function. And then we took the actual road experiment of many models of vehicles.
Technical Paper

Determination of Critical Speed, Slip Angle and Longitudinal Wheel Slip based on Yaw Marks Left by a Wheel with Zero Tire Pressure

2016-04-05
2016-01-1480
This article presents the results of an analysis of the yaw marks left by a car with normal pressure in all tires and then normal pressure in three tires and zero in one rear tire. The analysis is a continuation of research on influence of reduced tire pressure on car lateral dynamics in a passing maneuver, discussed in the SAE paper No. 2014-01-0466. Preliminary analysis of yaw marks has shown, that a wheel with zero pressure deposits a yaw mark whose geometry differs from the yaw mark made by a wheel with normal pressure based on which we could calculate: critical speed, slip angle and longitudinal wheel slip. The aim of the presented research was to analyze the yaw marks left by car with zero pressure in one rear wheel in order to check the possibility of determining the vehicle critical speed, slip angle and longitudinal wheel slip. It was reached by performing bench and road tests during which the vehicle motion parameters were recorded using GPS Data Logging System.
X