Refine Your Search

Topic

Search Results

Technical Paper

Vehicle Acceleration Modeling in PC-Crash

2014-04-01
2014-01-0464
The research reported here offers a validation of this capability, demonstrating that PC-Crash can be used to realistically model the build-up of a vehicle's speed under maximal acceleration. ...In the research reported here, PC-Crash 9.0 was used to model the full-throttle acceleration capabilities of three vehicles with automatic transmissions - a 2006 Ford Crown Victoria Police Interceptor (CVPI), a 2000 Cadillac DeVille DTS, and a 2003 Ford F150. ...In each case, the full-throttle acceleration of the vehicles modeled in PC-Crash showed good agreement with the acceleration of the real vehicles in our road tests.
Technical Paper

The Collision and Trajectory Models of PC-CRASH

1996-02-01
960886
This paper presents the trajectory and collision models on which PC-CRASH is based. PC-CRASH'S model for predicting the 3D kinematics of a vehicle's pre- and post-impact trajectory, which is based on a discrete- kinetic time forward simulation of vehicle dynamics rather than empirically-derived “spin-out coefficients”, is described. ...PC-CRASH is a windowso-based accident-reconstruction program which combines the simulation of pre-collision, collision, and post-collision dynamics for multiple vehicles in a graphical environment.
Technical Paper

A Comparison Study between PC-Crash Simulation and Instrumented Handling Maneuvers

2011-04-12
2011-01-1121
Lateral acceleration, roll angle, roll rate, and yaw rate vehicle response from PC-Crash were compared to the MSAI sensor data. The authors modeled 26 handling tests. PC-Crash appeared to be a reasonable tool for modeling gross vehicle response. ...This research compares vehicle dynamic simulations in PC-Crash 8.2 to data recorded during instrumented handling tests conducted by Mechanical Systems Analysis Incorporated (MSAI). ...Vehicle weight, center of gravity (c.g) position, suspension stiffness parameters, tire parameters, steering angle, and vehicle speed data provided by MSAI were used as input for the PC-Crash model. Lateral acceleration, roll angle, roll rate, and yaw rate vehicle response from PC-Crash were compared to the MSAI sensor data.
Journal Article

Verification of ABS Models Applied in Programs for Road Accident Simulation

2010-04-12
2010-01-0070
The objective of the paper is to present the results of verification of ABS models applied in PC-Crash and HVE (Human-Vehicle-Environment) computer programs in various road conditions. The aim was reached by comparison of the road tests results obtained and calculations performed using the programs for the same initial values of the measured variables.
Journal Article

Reconstructing Vehicle Dynamics from On-Board Event Data

2019-04-02
2019-01-0632
These predictions were generated by directly integrating the VCH data and by using the VCH data as inputs to PC-Crash simulations. The predicted positions and headings were then compared to the actual position and heading data measured using differential GPS synchronized to the VCH data record.
Technical Paper

ERRATUM

2014-04-01
2014-01-0464.01
Technical Paper

Occupant Friction Coefficients on Various Combinations of Seat and Clothing

2009-06-11
2009-01-1672
This paper reports on tests conducted to determine static and dynamic coefficients of friction between occupant clothing and automotive seat upholstery materials. Multiple materials were used for both the occupants clothing and the seat upholstery to examine friction variations with various material combinations. A fixture was fabricated to hold an automotive seat stationary while a dummy was pulled forward off of the seat. The forces required to pull the dummy were recorded for the various upholstery and clothing materials and the coefficients of friction were determined.
Technical Paper

Rollover Crash Sensing and Safety Overview

2004-03-08
2004-01-0342
This paper provides an overview of rollover crash safety, including field crash statistics, pre- and rollover dynamics, test procedures and dummy responses as well as a bibliography of pertinent literature. Based on the 2001 Traffic Safety Facts published by NHTSA, rollovers account for 10.5% of the first harmful events in fatal crashes; but, 19.5% of vehicles in fatal crashes had a rollover in the impact sequence. Based on an analysis of the 1993-2001 NASS for non-ejected occupants, 10.5% of occupants are exposed to rollovers, but these occupants experience a high proportion of AIS 3-6 injury (16.1% for belted and 23.9% for unbelted occupants). The head and thorax are the most seriously injured body regions in rollovers. This paper also describes a research program aimed at defining rollover sensing requirements to activate belt pretensioners, roof-rail airbags and convertible pop-up rollbars.
Technical Paper

Modeling of Occupant Impacts During Rollover Collisions

2000-03-06
2000-01-0854
This paper describes a modeling method whereby the occupant impacts during rollover collisions may be predicted with sufficient accuracy to predict their injury level. By using MADYMO to reconstruct the vehicle motions during a rollover collision and the subsequent vehicle accelerations, the model may also be used to calculate occupant impact accelerations if reasonable estimates of interior surface stiffnesses are used.
Technical Paper

Evaluation of the Effectiveness of Volvo’s Pedestrian Detection System Based on Selected Real-Life Fatal Pedestrian Accidents

2016-04-05
2016-01-1450
The objective of this work is to test the potential benefit of active pedestrian protection systems. The tests are based on real fatal accidents with passenger cars that were not equipped with active safety systems. Tests have been conducted in order to evaluate what the real benefit of the active safety system would be, and not to gain only a methodological prediction. The testing procedure was the first independent testing in the world which was based on real fatal pedestrian accidents. The aim of the tests is to evaluate the effectiveness of the Volvo pedestrian detection system. The in-depth accident database ZEDATU contains about 300 fatal pedestrian traffic accidents in urban areas. Eighteen cases of pedestrians hit by the front end of a passenger vehicle were extracted from this database. Cases covering an average traffic scenario have been reconstructed to obtain detailed model situations for testing.
Technical Paper

Modeling the Effects of Seat Belt Pretensioners on Occupant Kinematics During Rollover

2006-04-03
2006-01-0246
The results of a number of previous studies have demonstrated that seat-belted occupants can undergo significant upward and outward excursion during the airborne phase of vehicular rollover, which may place the occupant at risk for injury during subsequent ground contacts. Furthermore, testing using human volunteers, ATDs, and cadavers has shown that increasing tension in the restraint system prior to a rollover event may be of value for reducing occupant displacement. On this basis, it may be argued that pretensioning the restraint system, utilizing technology developed and installed primarily for improving injury outcome in frontal impacts, may modify restrained occupant injury potential during rollover accidents. However, the capacity of current pretensioner designs to positively impact the motion of a restrained occupant during rollover remains unclear.
Technical Paper

Comparisons of Devices for Measuring Acceleration vs. Time in Braking Tests

2008-04-14
2008-01-0180
The coefficient of friction between a vehicle's tires and the roadway is a key parameter in any accident reconstruction. With the proliferation of vehicle dynamics software, it is often important to have more details regarding the tires interaction with the road than simply the average deceleration rate. Devices which can provide the peak friction as the braking develops, along with the average deceleration during the fully developed sliding phase, are necessary. There are now products widely available to the accident reconstruction market which provides these parameters as well as detailed acceleration vs. time curves. The following products capable of providing these results were tested: Accelerex, Vericom VC3000, and two general purpose accelerometers made by Silicon Designs and Dimension Engineering. Tests were conducted on wet and dry asphalt surfaces using a variety of passenger vehicles and transit buses which confirmed the agreement between these devices.
Technical Paper

Accuracy and Sensitivity of Yaw Speed Analysis to Available Data

2019-04-02
2019-01-0417
Accident reconstructionists rarely have complete data with which to determine vehicle speed, and so the true value must be bracketed within a range. Previous work has shown the effect of friction uncertainty in determining speed from tire marks left by a vehicle in yaw. The goal of the current study was to assess improvements in the accuracy of vehicle speed estimated from yaw marks using progressively more scene and vehicle information. Data for this analysis came from staged S-turn maneuvers that in some cases led to rollover of sport utility vehicles. Initial speeds were first calculated using the critical curve speed (CCS) formula on the yaw marks from the first portion of the S-maneuver. Then computer simulations were performed with progressively more input data: i) the complete tire marks from the whole S-maneuver, ii) measured vehicle mass, iii) measured suspension stiffness and damping, and iv) measured steering history.
Technical Paper

Tackling Three Critical Issues of Transportation: Environment, Safety and Congestion Via Semi-autonomous Platooning

2014-03-24
2014-01-2007
In recent years, platooning emerged as a realistic configuration for semi-autonomous driving. In the SARTRE project, simulation and physical tests were performed to validate the platooning system not only in testing facilities but also in conventional highways. Five vehicles were adapted with autonomous driving systems to have platooning functionalities, enabling to perform platoon tests and assess the feasibility, safety and benefits. Although the tested system was in a prototype, it demonstrated sturdiness and good functionality, allowing performing conventional road tests. First of all the fuel consumption decreased up to 16% in some configurations and different gaps between the vehicles were tested in order to establish the most suitable for platooning in terms of safety and economy. Additionally, the platooning technology enables a new level of safety in highways. Around 85% of the accident causation is the human factor.
Technical Paper

The Accident Research Unit Hannover as Example for Importance and Benefit of Existing In Depth Investigations

1994-03-01
940712
The In-Depth Investigations of the Accident Research Unit Hannover (Germany), which have been carried out since 1973 are described in the paper. The importance of the detailed analysis consists in the method, in the statistical approach and the continuous data collection over the years. The government as well as industrial manufacturers use this data. Since 1985 a statistical procedure including a mathematical weighting procedure has been applied. About 1000 cases per year are collected. In the paper, principal aspects in the technique of data collection, definitions of variables and possibilities of data usage are described. The limitations of in-depth investigations are discussed in principle, and demands for a worldwide level are pointed out.
Technical Paper

The CREST project accident data base

2001-06-04
2001-06-0042
The protection of children in cars is improving with the increasing use of better designed restraint systems. Indeed, when children are correctly restrained in appropriate child restraint systems (CRS) they are sufficiently well protected in moderate frontal impacts. However, the levels of protection afforded in severe frontal impacts and lateral crashes has needed further attention. The CREST project, funded by the European Commission, was initiated to develop the knowledge on the kinematics behavior and tolerances of children involved in car crashes. The final aim of the project is to propose enhanced test procedures for evaluating the effectiveness of child restraint systems (CRS). The method used in this project was to collect data from accident investigations and from reconstructed crashes in order to determine the physical parameters (measured on dummies) which correspond to various injury mechanisms, and is described in ESV 2001 - paper n°294.
X