Refine Your Search

Topic

Author

Search Results

Technical Paper

A Comparison Study between PC-Crash Simulation and Instrumented Handling Maneuvers

2011-04-12
2011-01-1121
Lateral acceleration, roll angle, roll rate, and yaw rate vehicle response from PC-Crash were compared to the MSAI sensor data. The authors modeled 26 handling tests. PC-Crash appeared to be a reasonable tool for modeling gross vehicle response. ...This research compares vehicle dynamic simulations in PC-Crash 8.2 to data recorded during instrumented handling tests conducted by Mechanical Systems Analysis Incorporated (MSAI). ...Vehicle weight, center of gravity (c.g) position, suspension stiffness parameters, tire parameters, steering angle, and vehicle speed data provided by MSAI were used as input for the PC-Crash model. Lateral acceleration, roll angle, roll rate, and yaw rate vehicle response from PC-Crash were compared to the MSAI sensor data.
Technical Paper

Accuracy and Sensitivity of Yaw Speed Analysis to Available Data

2019-04-02
2019-01-0417
Accident reconstructionists rarely have complete data with which to determine vehicle speed, and so the true value must be bracketed within a range. Previous work has shown the effect of friction uncertainty in determining speed from tire marks left by a vehicle in yaw. The goal of the current study was to assess improvements in the accuracy of vehicle speed estimated from yaw marks using progressively more scene and vehicle information. Data for this analysis came from staged S-turn maneuvers that in some cases led to rollover of sport utility vehicles. Initial speeds were first calculated using the critical curve speed (CCS) formula on the yaw marks from the first portion of the S-maneuver. Then computer simulations were performed with progressively more input data: i) the complete tire marks from the whole S-maneuver, ii) measured vehicle mass, iii) measured suspension stiffness and damping, and iv) measured steering history.
Book

Advances in Side Airbag Systems

2005-01-15
Thanks to years of research and development by vehicle manufacturers, suppliers, legislation, and the entire safety community, the side airbag has become a critical safety device to reduce injury and save lives. This new collection of technical research highlights the progression of these essential safety features, providing a complete and thorough perspective through the analysis of both early patents and recent side airbag system developments. Advances in Side Airbag Systems begins with an introduction by editor Donald E. Struble, chronicling the progress made since the mid-1980s in offering improved side impact protection to the motoring public. Authored by leading experts in their respective fields, this book features a comprehensive collection of 26 landmark technical papers. Its scope includes not only thorax airbags, but other inflatable devices designed for side impacts and rollovers.
Technical Paper

An Analytical Review and Extension of Two Decades of Research Related to PC-Crash Simulation Software

2018-04-03
2018-01-0523
PC-Crash is a vehicular accident simulation software that is widely used by the accident reconstruction community. ...The goal of this article is to review the prior literature that has addressed the capabilities of PC-Crash and its accuracy and reliability for various applications (planar collisions, rollovers, and human motion). ...In addition, this article aims to add additional analysis of the capabilities of PC-Crash for simulating planar collisions and rollovers. Simulation analysis of five planar collisions originally reported and analyzed by Bailey [2000] are reexamined.
Technical Paper

Analysis of a Dolly Rollover with PC-Crash

2009-04-20
2009-01-0822
The current capabilities of PC-Crash for rollover modeling are discussed and suggestions are made for how PC-Crash might be improved for modeling rollovers. ...This paper evaluates the use of PC-Crash simulation software for modeling the dynamics of a dolly rollover crash test. The specific test used for this research utilized a Ford sport utility vehicle and was run in accordance with SAE J2114. ...Next, the test was modeled using PC-Crash. The simulation was optimized to yield a reasonable fit with the actual test dynamics by changing the following parameters in PC-Crash: (1) the friction coefficient associated with each vehicle-to-ground impact; (2) the coefficient of restitution for vehicle-to-ground impacts; (3) the vehicle body stiffness; and (4) the vehicle suspension and damping.
Technical Paper

Challenges in Simulation and Sensor Development for Occupant Protection in Rollover Accidents

2000-11-01
2000-01-C038
Automotive occupant safety continues to evolve. At present this area has gathered a strong consumer interest which the vehicle manufacturers are tapping into with the introduction of many new safety technologies. Initially, individual passive devices and features such as seatbelts, knee- bolsters, structural crush zones, airbags etc., were developed for to help save lives and minimize injuries in accidents. Over the years, preventive measures such as improving visibility, headlights, windshield wipers, tire traction etc., were deployed to help reduce the probability of getting into an accident. With tremendous new research and improvements in electronics, we are at the stage of helping to actively avoid accidents in certain situations as well as providing increased protection to vehicle occupants and pedestrians.
Book

Collision Reconstruction Methodologies Volume 6A: Rollover Accident Reconstruction

2018-11-02
The last ten years have seen explosive growth in the technology available to the collision analyst, changing the way reconstruction is practiced in fundamental ways. The greatest technological advances for the crash reconstruction community have come in the realms of photogrammetry and digital media analysis. The widespread use of scanning technology has facilitated the implementation of powerful new tools to digitize forensic data, create 3D models and visualize and analyze crash vehicles and environments. The introduction of unmanned aerial systems and standardization of crash data recorders to the crash reconstruction community have enhanced the ability of a crash analyst to visualize and model the components of a crash reconstruction. Because of the technological changes occurring in the industry, many SAE papers have been written to address the validation and use of new tools for collision reconstruction.
Book

Collision Reconstruction Methodologies Volume 6B: Rollover Accident Reconstruction

2018-11-02
The last ten years have seen explosive growth in the technology available to the collision analyst, changing the way reconstruction is practiced in fundamental ways. The greatest technological advances for the crash reconstruction community have come in the realms of photogrammetry and digital media analysis. The widespread use of scanning technology has facilitated the implementation of powerful new tools to digitize forensic data, create 3D models and visualize and analyze crash vehicles and environments. The introduction of unmanned aerial systems and standardization of crash data recorders to the crash reconstruction community have enhanced the ability of a crash analyst to visualize and model the components of a crash reconstruction. Because of the technological changes occurring in the industry, many SAE papers have been written to address the validation and use of new tools for collision reconstruction.
Book

Collision Reconstruction Methodologies Volume 6C: Rollover Accident Reconstruction

2018-11-02
The last ten years have seen explosive growth in the technology available to the collision analyst, changing the way reconstruction is practiced in fundamental ways. The greatest technological advances for the crash reconstruction community have come in the realms of photogrammetry and digital media analysis. The widespread use of scanning technology has facilitated the implementation of powerful new tools to digitize forensic data, create 3D models and visualize and analyze crash vehicles and environments. The introduction of unmanned aerial systems and standardization of crash data recorders to the crash reconstruction community have enhanced the ability of a crash analyst to visualize and model the components of a crash reconstruction. Because of the technological changes occurring in the industry, many SAE papers have been written to address the validation and use of new tools for collision reconstruction.
Technical Paper

Computer Simulation of Steer-Induced Rollover Events Via SIMON

2011-04-12
2011-01-1122
This study examines through computer simulation the reconstruction of on-road vehicle rollover accidents induced by a driver steering maneuver. The three-dimensional vehicle dynamics software package SIMON is used to model a set of four test vehicles as six degree-of-freedom sprung masses with up to five degrees-of-freedom for each unsprung mass. The performance of the simulator's physics model, in the context of accident reconstruction, is evaluated through correlation with full-scale vehicle rollover tests. Of specific interest to this study was simulation of the trip phase of the vehicle's motion. The correlation parameters include vehicle trajectory, speed, heading angle, yaw rate, roll angle, roll rate and lateral acceleration. SIMON's capacity to accurately model the physics of a test vehicle's suspension and tire kinetics in the pre-trip and trip phases of motion is evaluated by modeling a set of four instrumented full-scale tests of steering-induced rollovers.
Technical Paper

Design and Evaluation of an Affordable Seatbelt Retrofit for Motor Coach Occupant Safety

2017-01-10
2017-26-0018
Prevention of passenger ejection from motor coach seats in the case of rollover and frontal crashes is critical for minimizing fatalities and injuries. This paper proposes a novel concept of affordably retrofitting 3-point seatbelts to protect passengers during these significant crash scenarios. Currently, the available options involve replacement of either the entire fleet, which takes time to avoid extremely high costs, or all seats with new seats that have seatbelts which is still expensive. Alternatively, this paper presents the development of an innovative product that can be installed in seat belt-ready bus structures at a fraction of the cost. The efficacy of the design is studied using finite element analysis (FEA) to meet Federal Motor Vehicle Safety Standards (FMVSS) 210 standards for conditions involved in frontal and side impacts.
Technical Paper

Development of CAE Methodology for Rollover Sensing Algorithm

2009-04-20
2009-01-0828
The Rollover CAE model is developed for Rollover sensing algorithm in this paper. By using suggested CAE model, it is possible to make sensing data of rollover test matrix and these data can be used for calibration of rollover sensing algorithm. Developed vehicle model consists of three parts: a vehicle parts, an occupant parts and a ground boundary conditions. The vehicle parts include detailed suspension model and FE structure model. The occupant parts include ATD (anthropomorphic test device) male dummy and restraint systems: Curtain Airbag and Seat-Belt. We find analytical value of the suspension model through correlation with vehicle drop test, simulate this model under the conditions of untripped (Embankment, Corkscrew) and tripped (Curb-Trip, Soil-Trip) rollover scenarios. Comparison of the simulation and experimental data shows that the simulation results of suggested CAE model can be substituted for the experimental ones in calibration of rollover sensing algorithm.
Technical Paper

Effective Numerical Simulation Tool for Real-World Rollover Accidents by Combining PC-Crash and FEA

2007-04-16
2007-01-1773
In this work, we focused on the trip-over type, which occurs most frequently, and performed simulations to reproduce real-world rollover accidents by combining PC-Crash and FEA. At first, using a simplified full car model, sufficient conditions, such as additional velocity, required for a curb trip-over accident to occur, were derived from energy balance concept based on the same principle as critical sliding velocity (CSV) criterion. ...Based on rigid body dynamics, PC-Crash software was chosen to make an accident reconstruction analysis of some selected cases chosen from an accident database (NASS-CDS). ...The output of this PC-crash simulation was then used as the initial input conditions (i.e., speed, deceleration, etc.) of a detailed finite element analysis.
Technical Paper

Effectiveness of Side-Airbags for Front Struckside Belted Car Occupants in Lateral Impact Conditions - An In-Depth-Analysis by GIDAS1

2007-04-16
2007-01-1157
Accident documentations on GIDAS (German In-Depth-Accident Study) from 1999 to 2005 are used for this study dealing with the effectiveness of the side airbag protection for car occupants. An analysis of real world accidents was carried out by ARU-MUH (Accident Research Unit - Medical University Hannover). The data were collected based on the spot documentation in time after an accident event. Based on the accident sampling process, the results of this study are representative for the German traffic accident situation. In order to determine the influence and the effectiveness of airbags, only those accident configurations with comparable conditions on impact direction are used for the study, therefore only cases with impact to the compartment, a delta-v-range 5 to 50 km/h and for struckside seated belted occupants were selected.
Technical Paper

Electronics and Algorithms for Rollover Sensing

2004-03-08
2004-01-0343
Rollover sensing and discrimination generally requires an algorithm that monitors vehicle motion and anticipates conditions that will lead to a rollover. In general, a deploy command is required in a time frame such that safety measures can be activated early enough to protect the occupants. A rollover discrimination system will typically include internal motion sensors, vehicle signals from other on-board sensors, and a microprocessor to execute the deployment algorithm. A supplemental signal path is used to arm the system, making it less susceptible to single point component failures. In this chapter we explore basic concepts of rollover sensors and system mechanization, rollover discrimination algorithms, and arming methodology. A simulation environment that models the performance of the system across part tolerance, temperature extremes and component age is used to estimate the scope of expected discrimination performance in the field.
Technical Paper

Energy and Major Diversion in Accident Reconstruction

1996-02-01
960888
Special methods of momentum-based accident reconstruction often are required when path diversions are major, that is, in excess of about 45°. An energy-based component is well known to be required for the maximal path diversion of 180″; with parallel unknowns the two momentum equations become identical, so that an independent equation based on the observed damage is required. Also-as we demonstrated in a previous paper-in intersection impacts, even with modest path diversions, momentum loss to earth during impact, while classically neglected, appreciably affects the inferred momentum of approach. The present study shows further that, with major diversion and brief travel to rest, conventional neglect of travel during impact may greatly distort the assigned post-impact travel direction and/or distance and, in consequence, the momentum solution.
Technical Paper

Factors Influencing Roof-to-Ground Impact Severity: Video Analysis and Analytical Modeling

2007-04-16
2007-01-0726
This paper explores the dynamics of rollover crashes and examines factors that influence the severity of the roof-to-ground impacts that occur during these crashes. The paper first reports analysis of 12 real-world rollover accidents that were captured on video. Roll rate time histories for the vehicles in these accidents are reported and the characteristics of these curves are analyzed. Next, the paper uses analytical modeling to explore the influence that the trip phase characteristics may have on the severity of roof-to-ground impacts that occur during the roll phase. Finally, the principle of impulse and momentum is used to derive an analytical impact model for examining the mechanics of a roof-to-ground impact. This modeling is used to identify the influence of various impact conditions on the severity of a roof-to-ground impact.
Technical Paper

How to Use PC-CRASH to Simulate Rollover Crashes

2004-03-08
2004-01-0341
This study focuses on one program, PC-CRASH. This program was developed to allow simulations of vehicle 3-dimensional movements before, during and after the impact.
Technical Paper

Measuring and Modeling Suspensions of Passenger Vehicles

2013-04-08
2013-01-0774
Numerical parameters describing suspension stiffness and damping are required for 3D simulation of vehicle trajectories, but may not be available. This paper outlines a simple, portable method of measuring these properties with a coefficient of variation of 5% on stiffness. 24 of 26 vehicles tested were significantly stiffer in roll than pitch, complicating analyses with models that don't include anti-roll. Suspension parameters did not correlate with static wheel load distribution, and damping coefficient did not correlate with natural frequency. Computer simulations of the speed required to initiate rollover in an S-curve were highly sensitive to the suspension parameters used. When pre-impact tire marks and rollover distance were considered, the simulations became almost insensitive to suspension parameters.
Technical Paper

Modeling of Occupant Impacts During Rollover Collisions

2000-03-06
2000-01-0854
This paper describes a modeling method whereby the occupant impacts during rollover collisions may be predicted with sufficient accuracy to predict their injury level. By using MADYMO to reconstruct the vehicle motions during a rollover collision and the subsequent vehicle accelerations, the model may also be used to calculate occupant impact accelerations if reasonable estimates of interior surface stiffnesses are used.
X