Search Results

Automotive clearcoats have many purposes, from providing a glossy finish to protecting the underlying paint layers from UV radiation. Yellowing of clearcoats is a natural phenomenon during weathering processes, as well as from extreme baking conditions, due to polymer degradation. However, occasionally yellowing may be caused by unexpected chemical reactions occurring in the clearcoat. These reactions may happen very quickly (within hours or days) or take years to manifest, as other chemicals migrate into the clearcoat. We have investigated one family of these unexpected reactions which occur with certain UV absorbers, as well as how to prevent the reactions from occurring. We found that certain benzotriazole UV absorbers react readily with some common metals, including copper and zinc, provided that the UV absorber is not in its excited state. The conformational change that occurs within the benzotriazole when it absorbs UV radiation effectively inhibits the reaction with metals.

Under certain conditions, metals and other solids deform plastically. There are two conditions which promote plastic deformation: the condition of stress and the mechanism which determines how that deformation takes place. The critical condition of stress which produces yielding is due to the net effect of the combination of stresses acting at a point. A mathematical theory which predicts the critical condition of stress for which plastic flow occurs is a yield criterion. A new yield criterion is introduced. It is hyperbolic in form so it is significantly different from the criteria developed by Rankine, Tresca, Saint-Venant, or von Mises. But like these criteria, the new yield condition is also limited to a biaxial stress condition. The new yield criterion, because of its form, serves as an instructive model for the development of an analytical equation of equivalent form.

Data obtained when harvesting with a combine equipped with a yield monitor were used to develop yield maps. A prototype yield monitor was developed that uses a combination of light emitters and receivers mounted in a rectangular frame. The monitor was mounted in the combine in the top of the clean grain elevator. As grain flows through the monitor, a voltage change proportional to light reduction was recorded. This voltage was then correlated to grain flow rate. At the same time, site-specific location was recorded using the global positioning satellites (GPS) system. The location data, yield monitor output, cutting width, and combine forward speed were stored in a spreadsheet format. The data were then used to prepare the yield maps.

The hazardous bulk chemical liquid cargo transportation is usually made through highways, using special automotive devices, named semitrailer tank, a kind of mobile tank specially developed to perform this task, manufactured with many types of steel, selected according to the chemical characteristics of the product to be transported. Equipment sizing is made based on specific standards which include specified formulas, loading, and safety factors representing the design criteria of this type of device. Despite of the detailed design criteria for semitrailer tank, it has been observed failure of some pieces of equipment during operation, in a shorter effective life than that one considered in the design phase itself. Considering a detailed study of the stress distribution in this type of equipment, this paper shows a verification of the possibility of yielding failure in the semitrailer tank structure.

Guidelines for designing you-are-here (YAH) maps aboard International Space Station (ISS) are proposed, based on results from previous 3D spatial navigation studies conducted by our research group and colleagues. This paper reviews terrestrial YAH maps, the common errors associated with them, and how to appropriately implement what is known from terrestrial to micro-gravity YAH maps. We conclude with a creative example of an ISS YAH map that utilizes given guidelines and information visualization techniques.

This paper describes the ZENITH Nano-Satellite cum planetary atmospheric entry vehicle, called CanSat, the first Nano-Satellite project that has been developed by Delhi Technological University (Formerly Delhi College of Engineering), India. The satellite will function for monitoring the concentrations of various gases in the atmosphere. For this, the satellite consists of arduino microcontroller interfaced with the various Micro-electromechanical system (MEMS) gas sensors for measuring the concentrations of various gases such as carbon dioxide, carbon monoxide, methane, nitrous oxides, ozone, etc. The data obtained from the CanSat will be transmitted to the ground station where all the data will be stored and also the locations will be stored using GPS sensor. The academic goal of this project is to recruit students to the field of space science and technology.

This paper investigates the use of several zero-ozone depleting potential (zero-ODP) HFC refrigerants, including HFC-134a, HFC-227ca, HFC-227ea, HFC-236ea, HFC-236cb, HFC-236fa, HFC-245cb, and HFC-254cb, for centrifugal chiller applications. We took into account the thermodynamic properties of the refrigerant and aerodynamic characteristics of the impeller compression process in this evaluation.. For a given operating temperature lift, there are significant differences in the pressure ratio required by each refrigerant and this variation in pressure ratio directly affects compressor size, efficiency, and performance. A comparison of the HFC refrigerant candidates with CFC-114 shows that HFC-236ea, HFC-227ca and HFC-227ea are viable alternatives for centrifugal water chillers. HFC-236ea has properties closest to CFC-114, and will result in comparible performance, but will require a slightly larger impeller and a purge system.

The current environmental situation in urban areas is demanding new concepts of transportation and innovative vehicle designs. More environmentally-friendly means of transport represent an important feature in local public transport. Improvements in the environmental situation are to be achieved by increased transition from individual transport to public transport on the one hand, and by having more environmentally-friendly buses on the other. Electric drive, whether as diesel, hybrid or zero-emission drive, has a central role to play in this. This report gives a survey of their estimated technical characteristics and possible applications.

The megatrends "reduction of emissions" and "fuel consumption reduction" play a predominant role in the development of powertrains. For transit buses this implies both the reduction of emissions and pollutions of the internal combustion engine, and, on the other hand, a further reduction of noise and brake dust. Also very important is the reduction of both fuel consumption and CO₂ emissions. For all these targets the actual developments on the engine side have led to great improvements in the last decades, but what can be mentioned for the other components of the powertrain, especially looking for transmissions? First of all the relevant trends for transit buses have to be considered: A large increase of the torque of the combustion engines during the last years has a big impact on the development of transmissions for buses.

This paper describes the ZF - Intarder, a wear-free vehicle brake for commercial vehicles. Qualities such as optimum weight saving, compactness, compatibility with all PTOs and no change in driveshaft length, are the results of a new development. Performance measurements demonstrate connection with engine cooling system. Field test measurements provide new information about frequency of use of various brake levels and electronic speed control. An evaluation of financial issues indicates advantages for operation.

ZF debuts ADAS deal and flexible inverter tech at CES 2022

ZF rolls out new AV sensing system components at 2019 CES, promotes its geofenced shuttle while investing big in AV/EV tech.

ZF uses innovative motor cooling, winding technology and its transmission heritage to produce a more efficient and powerful drivetrain for electric vehicles.

European mega-supplier ZF has a "vision" for improving the automotive future. Much of it builds on the company's current driveline and chassis-development innovations.

This specification covers a zinc alloy in the form of die castings.

This specification covers a zinc alloy in the form of die castings.