Search Results

The use of carbon-free fuels, such as ammonia or hydrogen, or at least carbon neutral fuels, such as green methane or methanol is one of the most important paths in the development of clean internal combustion engines (ICE). Especially for large, heavy-duty engines, this seems to be the most promising route, as replacing them with battery electric or fuel cell drives poses even greater challenges, at least for the time being. But for some applications or areas of the world, even small ICEs for trucks, passenger cars or off-road vehicles, operated with alternative fuels will still remain the mean of choice. One of the biggest challenges in the development of hydrogen combustion engines is achieving high compression ratios and mean effective pressures due to combustion anomalies, caused by the low ignition delay and broad flammability limit of hydrogen. Oil droplets are considered to be one of the main triggers for pre-ignition and knocking.

Abstract Engine brakes are more effective in braking a heavy-duty vehicle during deceleration compared to the traditional clutch-brake system. Therefore, commercial vehicle OEM’s along with regulations, demand the acclimatizing of engine brake (EB) system. To achieve this, it is equally important to adopt to variable valve actuation dynamic valvetrain (VT) system. To help develop these systems, Model Based Product Development approach is used primarily at Eaton. In current work, the effect of valve lash sensitivity on EB performance and VT dynamics is studied using multi physics GT-SUITE models. This helps to understand the impact of lash on valve lift opening, lift loss and overall VT system compliance. In addition to above VT dynamics, its effect on EB power is also studied. This is done using a medium duty 6-cylinder GT-POWER engine model developed from Fast Response Model (FRM) database.

The development of new fuels for internal combustion engines requires further technical support by understanding the pollutant formation mechanism in various phases of combustion so that emissions can be minimized. This research will therefore utilize a bespoke in-cylinder sampling system to analyze the precursors of PAHs and particulates during bio-derived lactone combustion in a single-cylinder diesel engine. The sampling system was composed of a poppet-type in-cylinder sampling valve that displaced one of the engine intake valves and protruded into the combustion chamber beyond the flame quenching layer, and a Gas Chromatography Flame Ionization Detector (GC-FID) that examined the samples. The sampling valve was electromagnetically actuated, and its operation was referenced to the engine crank shaft encoder, allowing the valve to open at any Crank Angle Degree (CAD) within a timing resolution of 0.2 CAD.

The population growth has led to a significant rise in car demand, raising pollution levels. It compelled governments to enact more stringent pollution standards. Researchers are exploring alternative fuels and advanced low-temperature combustion modes to meet the emission standards. The reactivity-controlled compression ignition strategy is one of the potential combustion strategies to reduce the particulate matter and NOx simultaneously while maintaining higher fuel conversion efficiency. This study investigated the influence of Diesel injection timing and premixing ratio on the cyclic variation of RCCI engines fueled with gasoline and butanol as low reactivity fuel. The experiments were carried out on the single-cylinder diesel engine modified to operate in RCCI mode. All the experiments were carried out at constant load and engine speed. A developmental ECU was used to regulate fuel mass and injection time.

Oxygenated substances are a promising approach in the field of alternative fuels. A current example of such a fuel are Polyoxymethylene Dimethyl Ethers (OME). With their physical and chemical properties, alternative fuels like OME pose new challenges for diesel engine injection systems. As the heating value is low compared to conventional Diesel fuel, measures must be taken to increase the amount of fuel injected. Possible solutions include increasing the nozzle hole diameter, the injection pressure, and the number of nozzle holes. All mentioned adaptions have an influence on the mixture formation and make it necessary to examine the injection process in detail also with regard to phenomena such as cavitation. In this study, three passenger car Diesel injector nozzles are compared, two of which are adapted in terms of nozzle hole diameter (increase by 20%) and number of nozzle holes (increase from 8 to 12) in order to increase the mass flow rate of fuel to the required elevated level.

The Reactivity Control Compression Ignition (RCCI) engine, with its dual fuel system and coordinated injection strategy, offers superior emission control and fuel efficiency compared to conventional diesel engines. However, cyclic variations leading to engine combustion instability poses a significant challenge to their development and commercialization. In this study, statistical (COV and Histogram) and nonlinear dynamic (Recurrence Plot and its Quantification) analysis techniques are applied on the time-series data obtained from a single-cylinder diesel engine modified to operate in CNG-Diesel RCCI mode. The engine, while advancing the main injection timing (SOI-2), is tested under various operating conditions, including different engine loads, direct injection mass ratios (DIMR) and port fuel injection (PFI) masses, to help identify the configurations with better temporal correlations and deterministic traits. Such configurations hold potential for control strategy implementation.

A reactivity-controlled compression ignition (RCCI) engine offers ultralow soot and nitrogen oxide (NOx) emission in addition to higher thermal efficiency than diesel or compression ignition (CI) engines. However, the higher emissions of unburned hydrocarbons (HC) and carbon monoxide (CO) from RCCI engines pose a significant challenge that hinders their adoption in the future automotive sector. Additionally, HC includes several hydrocarbons that harm human health and the environment. This study aims to minimize HC and CO formation and emissions by implementing different injection strategies, including adjustments to spray angle configuration, injection timing, and fuel premixing ratio. Additionally, the study examines how different injection strategies affect the spatial and temporal distribution of HC and CO inside the combustion chamber.

A digital twin is a digital representation of a planned or real physical system, product, or process that functions as its practically identical digital counterpart for tasks such as testing, integration, monitoring, and maintenance. Creating digital twins allows the ‘digital system’ or ‘digital product’ to be tested faster-than-real-time improving overall efficiency and reducing time of a programme. The HORIBA Intelligent Lab virtual engineering toolset was used produce an empirically based digital twin of a contemporary off-highway diesel Internal Combustion Engine (ICE). These empirical models were then coupled with simulations developed by AgriSI and IPG CarMaker to predict performance and emissions for real-world machine handling cycles of off-highway machines such as ploughing, planting, weeding, and fertilising.

With all the environmental concern of diesel fuelled vehicle, it is a formidable challenge to phase out them completely specifically from Heavy duty application. Most pragmatic solution lies in solutions which improves the fuel economy and reduce the carbon emission of existing diesel fuelled vehicle fleet and have economical & feasible for vast geographical extent of country. With implementation of BS VI emission norms across country from April 2020, supply of BS VI complied diesel fuel started and BS VI complied vehicles with upgraded engine technologies and after treatment devices have started to come which make present vehicle fleets heterogeneous with substantive number of BS IV vehicle. Beside improvement of engine technologies, existing BS IV vehicle fleet performance can be enhanced through improved fuel and lubricants solutions.

Waste cooking oil can be converted into fuel for internal combustion (IC) engine applications by transesterification or pyrolysis. Transesterification results in the production of fatty acid methyl esters called biodiesel. The variability in biodiesel composition and properties from diesel fuel leads to engine re-calibration that requires significant time and effort. Diesel-like hydrocarbons can be produced by catalytic pyrolysis of used cooking oil. Such fuel can be used as a drop-in fuel in IC engine applications. Hydrogen at high pressures and a catalyst generally promote deoxygenation during pyrolysis. Recently, novel heterogenous acid catalysts such as Ni-impregnated activated carbon (AC) and Ag-Co-impregnated AC catalysts were developed to produce deoxygenated fuel by pyrolysis at atmospheric pressure without using hydrogen. Homogenous base catalysts such as sodium hydroxide can also be used in pyrolysis to produce diesel-like fuel.