Search Results

The author calls attention to the unreliability of the magnetic compass when used for aerial navigation and to the possible development of the gyroscopic compass for this purpose. He then explains how the drift of an airplane in flight makes it difficult to follow with accuracy a given course devoid of landmarks, unless an accurate drift indicator using the principle of the stroboscope is available. The development of such an instrument is then described, as are also means for synchronizing it with the compass. The use of the automatic synchronized instrument in flight over land is outlined, and its application to flight over water is described in considerable detail. Rules for aerial navigation over water, observation as to movement of wave crest and determination of wind velocity and direction are considered in their relation to the use of the instrument.

The authors outline some of the problems that confront the automobile engineer today, showing how the demand for better performance and economy and the ever-increasing cost of volatile fuels has emphasized the necessity for thorough engineering work in the successful automobile manufacturing plant. Believing that the accurate analysis of the heat distribution in a modern automobile engine will be of great value, the authors describe a comprehensive test, made under their direction, of such an engine. This test includes measurements of the brake horsepower, friction horsepower, fuel consumption and heat losses to jackets, exhaust and cooling air. The engine tested was inclosed in a hood, similar to that used on the car in normal service and an air blast was directed through this hood at speeds approximating those at which the engine would drive a car with a given gear ratio.

The author outlines methods for producing high-speed engines with high mean effective pressure and gives data resulting from several years' experimental work. He discusses the desirable stroke-bore ratios; valve area, weight, dimensions, location and timing; compression ratios; ignition requirements; and the location and means for operating camshafts and other valve-actuating mechanism. Data are given regarding the best material and dimensions for pistons and the desirable number of rings. The physical characteristics of alloy steel desirable for use in connecting-rods are mentioned. Similar data, including dimensions and factors controlling the construction of the crankshaft and its bearings are included. The relation of the inertia stresses set up by reciprocating parts to those due to the explosion and compression pressure on the piston head is indicated, and the maximum total stress deduced.

The author believes that an incompatibility exists between the results achieved in this country by the growth of the automobile industry and the almost complete lack of rational data on the most essential elements of kinetics relating to the modern automobile. He submits considerations that can be used in establishing a rational theory of spring suspension in general. A few words are devoted to the first principles of dynamics of springs, to damping, kinematic features of harmonic motion, energy consumption and shock absorbers. An introductory problem, involving an imaginary one-wheel “elemental car”, meant for purely inductive purposes, is then analyzed. Finally the main problem is presented in the form of an analysis of a skeleton-car, spring-suspended and simplified as much as possible.

The author points out the necessity of obtaining dynamic or running balance of rotating parts, especially in automobile-engine construction. He discusses the manifestations of the lack of static and running balance, such as vibration and high bearing pressures. Formulas are supplied for calculating bending moments and centrifugal forces in a crankshaft that is out of balance. Methods for obtaining static balance are described and the possible conditions existing after static balance is obtained are treated, with especial reference to the existence of one or more couples. Descriptions are given of two representative machines that are used to locate couples and correct for them. The principles of operation are made clear and advantages and disadvantages of each type are brought out fully.

The author discusses in this paper a few of the problems involved in the design of ignition equipment. Some of these problems have been solved and some remain to be solved. The early history of the development of ignition apparatus is traced, reference being made to the vibrating coil type of ignition operated by dry cells or storage batteries, various types of magneto and dual-magneto systems, and combined generator and storage battery systems. The balance of the paper refers more particularly to batteries and ignition proper. The two types of battery ignition, open-circuit and closed-circuit, are described and the current characteristics of each are shown graphically by means of curves. Some of the problems encountered in the development of present battery systems are next considered and such topics as reduction of inertia in the contact-arm, overcoming harmonic vibration, advantages of one-piece cams and the function and design of the condenser are treated in detail.

This paper discusses the principles of battery ignition and then describes high-tension magneto ignition. A comparison between the two types of ignition is given, and the paper concludes by illustrating diagrammatically how and why a very hot spark causes the engine to produce more power and to economize on fuel consumption.

After pointing out the existing dearth of easily workable data and formulas covering automobile suspensions, the author mentions the elements that contribute to riding comfort. He then outlines what he considers a good suspension, tabulating the spring dimensions of five hypothetical cars, typical of those on the American market. Curves of spring deflection are included in the paper. Functions of rear springs, the damping effect essential in good suspensions, “thin leaf” springs and spring lubrication are next discussed. In conclusion the author covers means of improving a car's riding qualities and cites a very interesting test for determining spring performance by means of the impressions made on a photographic plate by light from electric lamps mounted on wheels and fenders of an automobile and on the passengers.

After a few general introductory remarks the author outlines the operating requirements for tractors, and takes up the matter of the proper sizes of tractors, stated in horsepowers per given number of plows. The use of lower-grade fuels, value of water in the engine, cylinder construction, methods of lubrication and design of drive-wheels are the subjects covered by the balance of the paper.

The author first compares mineral oils with certain other liquids in order to point out clearly certain of their characteristics. He then shows the economic benefits that would result from making more of the crude available for use as fuels. He discusses such topics as cracking methods in use, advantages of dry gas, initial flame propagation, gas producers, hot mixtures, wet mixtures and difficulties of correcting existing engines. He concludes by proposing as a solution of the gasoline problem the more general use of superheated homogeneous fixed dry gases made in vaporizing devices independent of engine cylinders, and outlines means for attaining this end. Performance data covering the use of mixtures of kerosene and gasoline on several cars are included in a table, and several charts throughout the paper illustrate many of the topics discussed.

The author, from a first-hand study of this engine in the laboratory of Professor Junkers, traces the progress of the developmental work, and discusses the methods of operating the engine, its present status, its application to airplanes, trucks and tractors, details of marine and stationary types, fuel, advantages of and objections to the double-piston construction, and describes at some length the various parts entering into the construction of this type of engine. In conclusion, he summarizes the fundamental advantages of the Junkers engine.