Refine Your Search

Topic

Search Results

Viewing 1 to 16 of 16
Technical Paper

Low Pressure Cooled EGR Transient Estimation and Measurement for an Turbocharged SI Engine

2016-04-05
2016-01-0618
Low Pressure Cooled Exhaust Gas Recirculation (LP EGR) is an attractive technology to reduce fuel consumption for a spark-ignition (SI) engine, particularly at medium-to-high load conditions, due to its knock suppression and combustion cooling effects. However, the long LP EGR transport path presents a significant challenge to the transient control of LP EGR for the engine management system. With a turbocharged engine, this is especially challenging due to the much longer intake induction system path compared with a naturally aspirated engine. Characterizing and modeling the EGR, intake air mixing and transport delay behavior is important for proper control. The model of the intake air path includes the compressor, intercooler and intake plenum. It is important to estimate and track the final EGR concentration at the intake plenum location, as it plays a key role in combustion control. This paper describes the development of a real-time, implementable model for LP EGR estimation.
Video

New Energy Vehicle (NEV) Progress in China

2012-03-29
Vehicle electrification is shaping the future of automotive mobility in terms of automotive power and propulsion. The market for New Energy Vehicles (HEV/PHEV/REEV/EV) as well as clean vehicle technologies is expected to grow steadily driven by government regulations mandating increased fuel economy and lower emissions. The fastest growth in this market will be in Asia Pacific, most notably China. The Chinese government has made its intentions clear on how important it considers the development and consumer purchase of hybrid and electric vehicles. The mandate is that by year 2012, vehicle manufacturers produce at least 500,000 units (or 5%) per year of their total output as hybrid and/or electric. All Chinese vehicle manufacturers must have at least one HEV or EV model in the market by the same year. Thus far China has invested over US$3.5 billion to stimulate the production of NEVs and the necessary infrastructure to support them.
Book

Active Safety and Connectivity in the Mobility Industry

2011-10-24
This set includes two books, edited by Delphi's Chief Technology Officer Dr. Andrew Brown, Jr., which explore some of the most significant challenges currently facing the automotive industry-building safer and more connected vehicles. Active Safety and the Mobility Industry and Connectivity and the Mobility Industry each include 20 SAE technical papers on their respective topics, originally published from 2009 through 2011. Active Safety and the Mobility Industry Details the latest innovations and trends in active safety technology and driver distraction prevention techniques. Connectivity and the Mobility Industry Covers such topics as vehicle-to-vehicle communications, telematics, and autonomous driving. It also includes three original articles on automotive connectivity, written by various industry experts. Buy a Combination of Books and Save!
Book

Green Technologies and Connectivity in the Mobility Industry

2011-10-24
This set includes two books, edited by Delphi's Chief Technology Officer Dr. Andrew Brown, Jr., which explore some of the most significant challenges currently facing the automotive industry-building greener and more connected vehicles. Green Technologies and the Mobility Industry and Connectivity and the Mobility Industry each include 20 SAE technical papers on their respective topics, originally published from 2009 through 2011. Green Technologies and the Mobility Industry http://books.sae.org/book-pt-146 Showcases how the mobility industry is developing greener products and staying responsive - if not ahead of - new standards and legal requirements Connectivity and the Mobility Industry http://books.sae.org/book-pt-148 Covers such topics as vehicle-to-vehicle communications, telematics, and autonomous driving. It also includes three original articles on automotive connectivity, written by various industry experts. Buy a Combination of Books and Save!
Book

Connectivity and the Mobility Industry

2011-10-24
Bound to play an ever increasing role in the driver-vehicle relationship, connectivity is becoming a basic consumer requirement when it comes to choosing a vehicle. Moving from the computer into the car, the ability to stay in touch, informed and entertained has reached yet a higher level of technology ubiquity. Featuring 20 SAE technical papers published in 2010 and 2011, Connectivity and the Mobility Industry addresses important aspects of one of the most cutting-edge topics in the industry today. Edited by Dr.
Book

Green, Safe, & Connected: The Future of Mobility

2011-10-24
This three-volume set includes explores the new paradigm "green, safe and connected" in the automotive industry. These books have been compiled for those looking for an integrated view of how the driving experience will develop within these boundaries, and what emerging technologies are likely to be successful in the upcoming years. Edited by Dr. Andrew Brown, Jr., Executive Director & Chief Technologist for Delphi Corporation, all three books include 20 technical papers written on their respective subject between 2009 and 2011. The set includes the following titles: Green Technologies and the Mobility Industry Covers a wide range of subjects showcasing how the industry is developing greener products and keeping up with-if not staying ahead of-new standards and regulations. Active Safety and the Mobility Industry Details the latest innovations and trends in active safety technology and driver distraction prevention techniques.
Book

Green Technologies and Active Safety in the Mobility Industry

2011-09-12
This set includes two books, edited by Delphi's Chief Technology Officer Dr. Andrew Brown, Jr., which explore some of the most significant challenges currently facing the automotive industry-building green and safer vehicles. "Green Technologies and the Mobility Industry" and "Active Safety and the Mobility Industry" each include 20 SAE technical papers on their respective topics, originally published from 2009 through 2011. Green Technologies and the Mobility Industry Covers a wide range of subjects showcasing how the industry is developing greener products and keeping up with-if not staying ahead of-new standards and regulations. Active Safety and the Mobility Industry Details the latest innovations and trends in active safety technology and driver distraction prevention techniques. Buy a Combination of Books and Save!
Book

Active Safety and the Mobility Industry

2011-04-11
Safety is a key element in new vehicle design and active safety, together with driver distraction prevention, has become one of the most talked about issues in the mobility industry. This book features 20 SAE technical papers, originally published in 2009 and 2010, which showcase how the mobility industry is considering all aspects of safety in designing and producing safer vehicles. These papers were selected by SAE International's 2010 President Dr. Andrew Brown Jr., Executive Director and Chief Technologist for Delphi Corporation. The contents of this book explore a variety of safety issues in the areas of market and consumer preferences; driver assistance and modeling; active safety system, crash sensing and sensor fusion; communications; and road safety. The publication also includes a number of articles authored by renowned experts in the field of active safety.
Book

Green Technologies and the Mobility Industry

2010-11-16
This book features 20 SAE technical papers, originally published in 2009 and 2010, which showcase how the mobility industry is developing greener products and staying responsive - if not ahead of - new standards and legal requirements. These papers were selected by SAE International's 2010 President Dr. Andrew Brown Jr., Executive Director and Chief Technologist for Delphi Corporation. Authored by international experts from both industry and academia, they cover a wide range of cutting-edge subjects including powertrain electrification, alternative fuels, new emissions standards and remediation strategies, nanotechnology, sustainability, in-vehicle networking, and how various countries are also stepping up to the "green challenge".
Technical Paper

Estimation of Vehicle Roll Angle and Side Slip for Crash Sensing

2010-04-12
2010-01-0529
Estimation of vehicle roll angle, lateral velocity and side slip angle for the purpose of crash sensing is considered. Only roll rate sensor and the sensors readily available in vehicles equipped with ESC (Electronic Stability Control) systems are used in the estimation process. The algorithms are based on kinematic relationships, thus avoiding dependence on vehicle and tire models, which minimizes tuning efforts and sensitivity to parameter variations. The estimate of roll angle is obtained by blending two preliminary estimates, each valid in different conditions, in such a manner that the final estimate continuously favors the more accurate one. The roll angle estimate is used to compensate the gravity component in measured lateral acceleration due to vehicle roll or road bank angle. This facilitates estimation of lateral velocity and side slip angle from fundamental kinematic relationships involving the gravity-compensated lateral acceleration, yaw rate and longitudinal velocity.
Technical Paper

In-Vehicle Networking Technology for 2010 and Beyond

2010-04-12
2010-01-0687
This paper is an overview of the current state (calendar year 2010) of in-vehicle multiplexing and what pertinent technologies are emerging. Usage and trends of in-vehicle networking protocols will be presented and categorized. The past few years have seen a large growth in the number and type of communication buses used in automobiles, trucks, construction equipment, and military, among others. Development continues even into boating and recreation vehicles. Areas for discussion will include SAE Class A, B, C, Diagnostics, SafetyBus, Mobile Media, Wireless, and X-by-Wire. All existing mainstream vehicular multiplex protocols (approximately 40) are categorized using the SAE convention as well as categories previously proposed by this author. Top contenders will be pointed out along with a discussion of the protocol in the best position to become the industry standard in each category.
Technical Paper

Effects of B20 Fuel and Catalyst Entrance Section Length on the Performance of UREA SCR in a Light-Duty Diesel Engine

2010-04-12
2010-01-1173
The current study focused on the effects B20 fuel (20% soybean-based biodiesel) and SCR entrance shapes on a light-duty, high-speed, 2.8L common-rail 4-cylinder diesel engine, at different exhaust temperatures. The results indicate that B20 has less deNOX efficiency at low temperature than ULSD, and that N₂O emission need to be characterized as well as NH₃ slip. If a mixer and enough mixing length are used, longer divergence section does not improve the deNOX efficiency significantly under the speed ranges tested.
Technical Paper

Effects of Injection Timings and Intake Port Flow Control on the In-Cylinder Wetted Fuel Footprints during PFI Engine Startup Process

2005-05-11
2005-01-2082
Wall-wetting due to liquid fuel film motion and fuel droplet impingement on combustion chamber walls is a major source of unburned hydrocarbons (UBHC), and is a concern for oil dilution in PFI engines. An experimental study was carried out to investigate the effects of injection timing, a charge motion control device, and the matching of injector with port geometry, on the “footprints” of liquid fuel inside the combustion chamber during the PFI engine starting process. Using a gasoline-soluble dye and filter paper deployed on the cylinder liner and piston top land surfaces to capture the liquid fuel footprints, the effects of the mixture formation processes on the wetted footprints can be qualitatively and quantitatively examined by comparing the wetted footprint locations and their color intensities. Real-time filming of the development of wetted footprints using a high-speed camera can also show the time history of the fuel wetting process inside an optically accessible engine.
Book

Occupant and Vehicle Responses in Rollovers

2004-03-08
During the past decade, there has been a steady increase in studies addressing rollover crashes and injuries. Though rollovers are not the most frequent crash type, they are significant with respect to serious injury and interest in rollovers has grown with the introduction of SUVs, vans, and light trucks. A review of Occupant and Vehicle Responses in Rollovers examines relevant conditions for field roll overs, vehicle responses, and occupant kinetics in the vehicle. This book edited by Dr. David C. Viano and Dr. Chantal S. Parenteau includes 62 technical documents covering 15 years of rollover crash safety, including field crash statistics, pre- and rollover dynamics, test procedures and dummy responses.
Technical Paper

Finite Element Simulation Study of a Frontal Driver Airbag Deployment for Out-Of-Position Situations

2003-10-27
2003-22-0011
As more and more active restraint devices are added by vehicle manufacturers for occupant protection, the history of driver frontal airbags illustrates that the design performance of such devices for in-position (IP) occupants often have to be limited in order to reduce their aggressiveness for out-of-position (OOP) situations. As of today, a limited number of publications dealing with FE simulation of airbag deployment for OOP are available. The objective of our study was to evaluate the feasibility of airbag deployment simulations based on an extensive set of well-defined physical test matrix. A driver frontal airbag was chosen (European mid-size car sample) for this study. It was deployed against a force plate (14 tests in a total of 6 configurations), and used with Hybrid III 50th percentile dummy (HIII) in OOP tests (6 tests, 4 configurations). Special attention was paid to control the boundary conditions used in experiments in order to improve the modelling process.
X