Search Results

Low Pressure Cooled Exhaust Gas Recirculation (LP EGR) is an attractive technology to reduce fuel consumption for a spark-ignition (SI) engine, particularly at medium-to-high load conditions, due to its knock suppression and combustion cooling effects. However, the long LP EGR transport path presents a significant challenge to the transient control of LP EGR for the engine management system. With a turbocharged engine, this is especially challenging due to the much longer intake induction system path compared with a naturally aspirated engine. Characterizing and modeling the EGR, intake air mixing and transport delay behavior is important for proper control. The model of the intake air path includes the compressor, intercooler and intake plenum. It is important to estimate and track the final EGR concentration at the intake plenum location, as it plays a key role in combustion control. This paper describes the development of a real-time, implementable model for LP EGR estimation.

This paper describes a method to estimate the engine stop position using any production style crank position sensor, while accounting for possible engine rock-back. The approach is based on modeling the engine speed state, achieving robustness and ease of calibration by adapting the rubbing friction model component during the first part of engine coast-down, followed by open-loop modeling when the engine speed has dropped below the sensor signal validity threshold.

This set includes two books, edited by Delphi's Chief Technology Officer Dr. Andrew Brown, Jr., which explore some of the most significant challenges currently facing the automotive industry-building safer and more connected vehicles. Active Safety and the Mobility Industry and Connectivity and the Mobility Industry each include 20 SAE technical papers on their respective topics, originally published from 2009 through 2011. Active Safety and the Mobility Industry Details the latest innovations and trends in active safety technology and driver distraction prevention techniques. Connectivity and the Mobility Industry Covers such topics as vehicle-to-vehicle communications, telematics, and autonomous driving. It also includes three original articles on automotive connectivity, written by various industry experts. Buy a Combination of Books and Save!

Bound to play an ever increasing role in the driver-vehicle relationship, connectivity is becoming a basic consumer requirement when it comes to choosing a vehicle. Moving from the computer into the car, the ability to stay in touch, informed and entertained has reached yet a higher level of technology ubiquity. Featuring 20 SAE technical papers published in 2010 and 2011, Connectivity and the Mobility Industry addresses important aspects of one of the most cutting-edge topics in the industry today. Edited by Dr.

This three-volume set includes explores the new paradigm "green, safe and connected" in the automotive industry. These books have been compiled for those looking for an integrated view of how the driving experience will develop within these boundaries, and what emerging technologies are likely to be successful in the upcoming years. Edited by Dr. Andrew Brown, Jr., Executive Director & Chief Technologist for Delphi Corporation, all three books include 20 technical papers written on their respective subject between 2009 and 2011. The set includes the following titles: Green Technologies and the Mobility Industry Covers a wide range of subjects showcasing how the industry is developing greener Active Safety and the Mobility Industry Details the latest innovations and trends in active safety technology and driver distraction prevention techniques. Connectivity and the Mobility Industry Covers such topics as vehicle-to-vehicle communications, telematics, and autonomous driving.

This set includes two books, edited by Delphi's Chief Technology Officer Dr. Andrew Brown, Jr., which explore some of the most significant challenges currently facing the automotive industry-building greener and more connected vehicles. Green Technologies and the Mobility Industry and Connectivity and the Mobility Industry each include 20 SAE technical papers on their respective topics, originally published from 2009 through 2011. Green Technologies and the Mobility Industry http://books.sae.org/book-pt-146 Showcases how the mobility industry is developing greener products and staying responsive - if not ahead of - new standards and legal requirements Connectivity and the Mobility Industry http://books.sae.org/book-pt-148 Covers such topics as vehicle-to-vehicle communications, telematics, and autonomous driving. It also includes three original articles on automotive connectivity, written by various industry experts. Buy a Combination of Books and Save!

This set includes two books, edited by Delphi's Chief Technology Officer Dr. Andrew Brown, Jr., which explore some of the most significant challenges currently facing the automotive industry-building green and safer vehicles. "Green Technologies and the Mobility Industry" and "Active Safety and the Mobility Industry" each include 20 SAE technical papers on their respective topics, originally published from 2009 through 2011. Green Technologies and the Mobility Industry Covers a wide range of subjects showcasing how the industry is developing greener products and keeping up with-if not staying ahead of-new standards and regulations. Active Safety and the Mobility Industry Details the latest innovations and trends in active safety technology and driver distraction prevention techniques. Buy a Combination of Books and Save!

Gasoline direct injection (GDi) engines have become popular due to their inherent potential for reduction of exhaust emissions and fuel consumption to meet increasingly stringent environmental standards. These engines require high-pressure fuel injection in order to improve the fuel atomization process and accelerate mixture preparation. To achieve a lower-cost system, a single-piston high-pressure fuel pump design is often employed due to its relative simplicity. However, pumps of this design are acknowledged as the source of high levels of fuel pressure fluctuations which can lead to audible noise, variations in the amount and spray quality of fuel delivery from cylinder to cylinder, compromised durability and consumer dissatisfaction. In this paper, the design process for a high-pressure fuel rail assembly using Robust Engineering methodology is presented.

Safety is a key element in new vehicle design and active safety, together with driver distraction prevention, has become one of the most talked about issues in the mobility industry. This book features 20 SAE technical papers, originally published in 2009 and 2010, which showcase how the mobility industry is considering all aspects of safety in designing and producing safer vehicles. These papers were selected by SAE International's 2010 President Dr. Andrew Brown Jr., Executive Director and Chief Technologist for Delphi Corporation. The contents of this book explore a variety of safety issues in the areas of market and consumer preferences; driver assistance and modeling; active safety system, crash sensing and sensor fusion; communications; and road safety. The publication also includes a number of articles authored by renowned experts in the field of active safety.

This book features 20 SAE technical papers, originally published in 2009 and 2010, which showcase how the mobility industry is developing greener products and staying responsive - if not ahead of - new standards and legal requirements. These papers were selected by SAE International's 2010 President Dr. Andrew Brown Jr., Executive Director and Chief Technologist for Delphi Corporation. Authored by international experts from both industry and academia, they cover a wide range of cutting-edge subjects including powertrain electrification, alternative fuels, new emissions standards and remediation strategies, nanotechnology, sustainability, in-vehicle networking, and how various countries are also stepping up to the "green challenge".

A complete system approach to power semiconductor analysis and selection is set forth in this paper. In order to address design overkill, a suitable power profile across the desired drive schedule is obtained through vehicle simulation in lieu of worse case operating conditions. The representative profile is then applied to detailed models of the inverter, power device, and power device thermal stack-up in order to predict worse case, silicon junction temperature rise. The simulation stream includes a closed silicon thermal loop that leads to more accurate power loss and junction temperature calculations. The models are combined and exercised in a single platform for ease of integration and fast simulation. Herein, the methods will be applied to a working example of an inverter for motor drives, and analytical results will be reviewed.

Intake camshaft retard beyond that necessary for reliable cold start-ability is shown to improve part-load fuel economy. By retarding the intake camshaft timing, engine pumping losses can be reduced and fuel economy significantly improved. At high engine speeds, additional intake cam retard may also improve full-load torque and power. To achieve these benefits, an intake camshaft phaser with intermediate lock pin position (ILP) and increased phaser authority was developed. ILP is necessary to reliably start at the intermediate phase position for cold temperatures, while providing increased phaser retard under warm conditions. The phaser also provides sufficient intake advance to maximize low-speed torque and provides good scavenging for boosted engine applications. Design and development of the intermediate locking phaser system is described. The pros and cons of various methods of accomplishing locking and unlocking a phaser are illustrated.

Estimation of vehicle roll angle, lateral velocity and side slip angle for the purpose of crash sensing is considered. Only roll rate sensor and the sensors readily available in vehicles equipped with ESC (Electronic Stability Control) systems are used in the estimation process. The algorithms are based on kinematic relationships, thus avoiding dependence on vehicle and tire models, which minimizes tuning efforts and sensitivity to parameter variations. The estimate of roll angle is obtained by blending two preliminary estimates, each valid in different conditions, in such a manner that the final estimate continuously favors the more accurate one. The roll angle estimate is used to compensate the gravity component in measured lateral acceleration due to vehicle roll or road bank angle. This facilitates estimation of lateral velocity and side slip angle from fundamental kinematic relationships involving the gravity-compensated lateral acceleration, yaw rate and longitudinal velocity.

Brazilian ethanol vehicles are typically equipped with an auxiliary gasoline sub-tank fuel system which aids cold starting and drivability for low ambient temperatures. Port fuel injectors capable of rapidly heating ethanol have been developed to eliminate this auxiliary system. These injectors also enable reductions in emissions. Computational Fluid Dynamics (CFD) is used in conjunction with Taguchi Robust Engineering methods to optimize the heat exchanging geometry of these heated injectors. Simulation results are confirmed with experimental hardware and engine cold start testing. Modeling results, experimental hardware, and engine cold start performance is presented and discussed.

Signal processing incorporating Artificial Neural Networks (ANN) has been shown to be well suited for modeling engine-related performance indicators [ 1 , 2 , 3 ] that require multi-dimensional parametric calibration space. However, to obtain acceptable accuracy, traditional ANN implementation may require processing resources beyond the capability of current engine controllers. This paper explores the practicality of implementing an ANN-based algorithm performing real-time calculations of the volumetric efficiency (VE) for an engine with variable valve actuation (phasing and lift variation). This alternative approach was considered attractive since the additional degree of freedom introduced by variable lift would be cumbersome to add to the traditional multi-dimensional table-based representation of VE.

This paper presents production Engine Management System algorithms for Estimation and Control of Turbocharged engines with the following qualities; 1) Model based ensuring applicability at all ambient conditions, 2) Does not require Turbine data for calibration 3) Estimation logic form allows reuse for control applying predictive values for response and stability 4) Applies to all Waste-Gate types; passive and active, pneumatic and electrical, 5) Does not require Waste-Gate position measurement 5) Applies to engines with Variable Geometry Turbine.

This paper addresses the longstanding problems of residual gas measurement during engine dynamometer testing, and of real-time residual modeling for engine control applications. A new method is described which is simple to apply, requiring only currently standard calibration test cell instrumentation. Experimental validation against measurements using direct in-cylinder CO2 sampling is presented, and a comprehensive error sensitivity analysis is included. A real-time capable, controls-oriented model is also described. Its accuracy is assessed by comparison to engine-simulation-generated residual values after using these values to determine the model parameters.

During the past decade, there has been a steady increase in studies addressing rollover crashes and injuries. Though rollovers are not the most frequent crash type, they are significant with respect to serious injury and interest in rollovers has grown with the introduction of SUVs, vans, and light trucks. A review of Occupant and Vehicle Responses in Rollovers examines relevant conditions for field roll overs, vehicle responses, and occupant kinetics in the vehicle. This book edited by Dr. David C. Viano and Dr. Chantal S. Parenteau includes 62 technical documents covering 15 years of rollover crash safety, including field crash statistics, pre- and rollover dynamics, test procedures and dummy responses.

As more and more active restraint devices are added by vehicle manufacturers for occupant protection, the history of driver frontal airbags illustrates that the design performance of such devices for in-position (IP) occupants often have to be limited in order to reduce their aggressiveness for out-of-position (OOP) situations. As of today, a limited number of publications dealing with FE simulation of airbag deployment for OOP are available. The objective of our study was to evaluate the feasibility of airbag deployment simulations based on an extensive set of well-defined physical test matrix. A driver frontal airbag was chosen (European mid-size car sample) for this study. It was deployed against a force plate (14 tests in a total of 6 configurations), and used with Hybrid III 50th percentile dummy (HIII) in OOP tests (6 tests, 4 configurations). Special attention was paid to control the boundary conditions used in experiments in order to improve the modelling process.