Search Results

Nowadays the automotive market is reducing product development time and launching more technological vehicles, always focusing on having even more safety with better customer experience which generates big competitiveness and requires more accurate and faster development, the virtual simulations make it possible to meet this new reality with a high confidence level. This work comprises the validation of a methodology to analyze the design confidence level for flexibles associated with suspension kinematics. To validate the methodology, the scanned physical model was compared with the virtual simulations using the Simcenter 3D Flexible Pipe software. As inputs data for simulation, it is used geometrical, physical, and chemical information. Through the suspension kinematics study was establish possible movement situations to obtain the flexibles deformations attending to all suspension positions.

Through computational dynamic simulations is possible to achieve high reliability index in the development of automotive components, thus reducing the time and component cost can generate significant levels of competitiveness and quality. This work suggests the validation of a methodology for simulation, able to predict and quantify the best design of the parking brake cable that although it is flexible, has in its structure composite elements of different mechanical properties. Known difficulty of mathematically predict nonlinear relationships deformation under forces and moments effect was first established, studies based on experimental measurements serve as input parameters for simulating the dynamic behavior of the flexible cable. With the aid of motion making use of NX9 CAD software, it was prepared the dynamic movement that the leaf spring suspension system does.

In this paper an alternative engineering solution to control vehicle steering wheel vibration is presented. The strategy is focused on the implementation of an effective tuned vibration absorber which also complies with time frame and costs requisites. The vibration levels in this case study are enhanced due resonances in the chassis frame and steering column. The tuned mass damper is basically a suspended mass attached on a vulcanized rubber body, aiming for the customer benefits; this solution can be classified as low cost as well low complexity for implementation. In this case study, a mid-size truck was used as a physical hardware and the data were collected through accelerometers on the steering wheel and other critical components. As a control factor, different tunings on different parts were applied to optimize the auxiliary system performance and robustness.

The high level of reliability of virtual analysis for suspension system development should not be thinking only for comfort and performance purpose, considering the `growing number of failures due to the touch between components in dynamic condition. The study establishes a simple and optimized methodology, able to predict more accurately the flexible brake hose path subject to the steering motion and associates with the independent suspension course, aiming the best route in order to achieve a low cost and robust design. In turn, the flexible brake hose non-linear model invalidates the multibody study to get the best route. However, with the aid of motion making use of NX9 [1] CAD [2] software was prepared dynamic movement that subjects front independent suspension system that establishes a Cartesian routine that maps 977 points, much higher than 9 points from previous studies, comprising a more accurate path performed by the hose.

Acoustics, in a broad sense, is an essential product attribute in the automotive industry, therefore, it is relevant to study and compare theoretical and numerical predictions to experimental acoustic measurements, key elements of many acoustic development processes. The numerical methods used in the industry for acoustic predictions are widely used for exhaust system optimization. However, the numerical and theoretical predictions very often differ from experimental results, due to modeling simplifications, temperature variations (which have high influence on speed of sound), manufacturing variations in prototype parts among others. This article aims to demonstrate the relevant steps for acoustics development applied in automotive exhaust systems and present a comparative study between experimental tests and computer simulations results for each process. The exhaust system chosen for this development was intended for a popular car 4-cylinder 1.0-liter engine.

This paper explores the method of modeling and validation the computational tools able to accurately replicate the dynamic behavior of a Formula SAE vehicle. Based on limitations in conducting physical tests, it is possible to mathematically predict the forces and momentum generated on the steering column of the vehicle, minimizing effort and improving driver comfort even before the component physically manufactured. The results in permanent state due technical instrumentations were used in the physical vehicles and compared with other proposals (skid Pad test). As the software simulating the same path, it was possible to adopt values of speed and wheel steering, allowing compare the dynamics of the vehicle, through the signals from other sensors installed in the data acquisition system, validating the behavior of the models presented in permanent state. Other aspects were studied to understand vehicle behavior concerning lateral stability and steering behavior.

The effects of specific parts inside the vehicle body in a radiated immunity numerical simulation is addressed. The benefits of numerical simulations for electromagnetic compatibility analysis is well known and reported in the literature, nevertheless, the accuracy of the results depends on the mathematical models that is being considered. Numerous simulations were performed, detailing how specific parts of a vehicle can affect the electric field inside a vehicle. The commercial package ANSYS HFSS™ was used due to the extremely fast and accurate simulations since it uses the finite element method technique, which includes hybridizations with the method of moments. This allows full simulations to be performed in a few minutes with controlled convergence, allowing a more extensive investigation. Simulation results are compared with experimental data obtained from experiments performed at Instituto Nacional de Pesquisas Espaciais showing a good agreement.

Vehicular manual transmissions systems often use a vent or breather to allow pressure control inside the main structure. This pressure variation comes along with differences caused by working temperature range. However along with air flow these vents may occasionally allow oil passage noticed by vehicle owner as a transmission leakage event. The more sophisticated the more expensive is the venting device which may contain membranes, labyrinths, baffles and other solutions to avoid leakage. The purpose of this paper is to present a simplified solution to avoid transmission fluid leakage by combining a regular sealing device (fiber concept gasket) and a baffle to avoid oil splash to reach the venting device. The proposed concept took into consideration a quick implementation aspect, low financial impact and less complexity to the overall current system modifying an existing component by adding secondary function instead of creating additional components.

This paper makes an analysis of problems encountered in assembling components from automotive vehicles. It shows wheel and tires assembling cases of an automaker that applies lean manufacturing concepts in the production process. This study not only makes the analysis from the best way to apply the methodology to seek for the root cause, but also uses methodology to identify containment measures, defining robust solutions capable of preventing the incidence of similar problems. This methodology can be applied to solving problems of any production process, even outside of the automotive industry

Over recent years, demands for fuel-efficient vehicles have increased with the rise of the fuel price and public concerns on environment. Recently, application of lightweight materials is increasing in the automobile industry in order to improve mass reduction and consequently fuel efficiency. On this particular study, with a goal of developing a Lightweight Fixed Steering Column, it was identified an opportunity to replace fixed steering column metallic upper and lower brackets by polymeric material. In order to fulfill NVH, Crash, Durability and Performance requirements, a DFSS methodology has been applied. As a result, It was achieved ∼51% of mass reduction, ∼10% of performance improvement with ∼14% of cost increase.

This work conducted an optimization in sheet metal blank's sizes for cold pressing automotive parts, comparing dimensional characteristics of automotive hood outer panels deep drawn with commonly used blank sizes for this process. As a result, it was possible to suggest modifications to smaller blank sizes, accordingly to the improvement accomplished in this work. The experimental study was conducted from observations in part's superficial aspects after its deep drawing process, which was realized in a commonly used tooling for automotive industry, with a blank's width reduction for the suggested case. The results showed a cost reduction opportunity based in this optimization.

The globalization, rivalry and the technologies have changed the auto industry in a battlefield, where companies are fighting for quality, reliability, the reduction of development cycle and also cost. The manufacturing process of car body is the major responsible for time consumption, labor and investment. One of the bottleneck solutions is to use computational simulations during design phase in order to minimize the reworks. The car body is composed by several stamped parts, and its design requires a series of parallel activities, and one of the fundamental information is the accurate magnitude of spring back distortions, but due to the complexity of the phenomenon, the results are not so accurate as desired. The explored literatures are recommending numeric methods to simulate material's behavior and also the spring back phenomenon.

Style changes and technological advances have led to reduced service life of current products as automobiles. These are among the goods that are constantly re-designed to meet our growing needs for improved products. However, these demands for new products and more modern has meant a great cost to our natural resources, such as excessive use of raw materials, water and energy during production, use and end of life cycle of these assets. The increasing scarcity of land available for the proper disposal of waste in landfills, in addition to the high cost of implementing these areas and the increasing distances to urban centers imply the need to reduce solid waste generation, including here the automotive. The growth of the automotive market has created a serious problem due to the disposal of urban waste volumes generated, the great diversity of materials involved and their toxicity.

The growing need to avoid failures in vehicle components have become the methods of quality control of manufacturing processes more efficient and accurate, especially in safety components like automotive wheels. The aim of this work is examines the efficiency of aluminum-silicon specifications related to wheel quality for avoiding the poor results obtained in impact and fatigue tests as result of improper settings in the chemical composition and manufacture process. It is evaluated mainly the content of magnesium in aluminum alloys and certified the correct degree of silicon modification in the microstructure on the performance of these wheels. The test results indicate that even with the chemical composition parameters specified by the standard, the technical validation of the product may not be adequate.

Development of an Electrical Power Steering (EPS) system for Emergent Markets, with emphasis on improved fuel economy and cost advantages to the customer. The EPS for Emergent Markets provides high steering wheel assistance on parking maneuvers and appropriate assistance on driving conditions similar to conventional EPS systems. The assistance levels decreases while vehicle speed increases providing better steering feel at high speed conditions (highway tracks). It also provides good tuning capability balanced with piece cost. In addition, this EPS enables an aftermarket bolt-on system for non-assisted steering vehicles (i.e., manual steering vehicles).

Nowadays, electromagnetic compatibility (EMC) has taken an important role in automotive development. This is because the effects that EMC can cause in a vehicle or on the environment. All systems contained in a vehicle emit EMC, and can be influenced by it also. During the vehicle design phase some variables have to be considered and improved to make the vehicle to be electromagnetic compatible. We can list the vehicle systems as electromagnetic generators or victims, as below: Generators: Ignition GPS transmission system Mobile phone transmission system Electrical motors Radars Power modules Victims: Sensors Cables Control modules (BCM, ECM, etc.) An example of a complete system subject to the EM effects is the X-by-wire (or drive-by-wire) system, where mechanical systems are substituted by modules, cables, sensors, actuators. This system has to be designed considering electromagnetic compatibility.

The current study shows important results obtained by a new technique of residual stress virtual evaluation in automotive components for improving the development and quality of new products, aiming the structural performance, mass and cost reductions. The approaching those virtual results were adjusted by metallurgic data obtained in metallography, mechanical and chemical analysis. As part of this proposal, an automotive aluminum wheel belong to current production was evaluated in accordance with data acquired in the wheel manufacturing process. It was taking in account the real information of casting process parameters and the metallurgic information obtained in laboratorial tests. In this work, the results show that product residual stresses shall be considerate and evaluated during design phases as improving proposal, new technical concerns and quality improving.

In the automotive industries, time and parts production costs are fundamental, mainly in prototyping production. The RTV (Room Temperature Vulcanized) process is an important alternative production to flexible silicone molds when you need to inject polyurethane parts. The objective is time reduction in tooling production and parts. RTV requires notable initial investments in equipments. Many times, this cost does not fit in the automotive third part company's budget. This work shows how is possible to obtain parts by RTV process with excellent quality, without high investments in equipments and without quality loss in produced parts. Lead times and tooling and parts costs are analyzed. Due to equipments low costs, this alternative is accessible not only to automotive industries but also to small and medium suppliers.

The present work gives an overview of the current situation of failures that may occur in automotive components, showing their distribution in the vehicle and the causes that make them occur, trying to emphasize the different materials which are used in the manufacturing of these components. This work is a technical approach strictly supported by an engineering concept which aims to discuss the different factors which contribute to cause premature failures of automotive components, prior to their utilization in the field or when they are exposed to the most variable conditions of use. One of the most important objectives of this study is to call the attention of design engineers, research engineers and manufacturing people to the importance of the components integrity which shall be taken into primary consideration in the design phase as well as in the specification of the material and process of manufacturing.