Search Results

The Crew Exploration Vehicle (CEV) is the first crew transport vehicle to be developed by the National Aeronautics and Space Administration (NASA) in the last thirty years. The CEV is being developed to transport the crew safely from the Earth to the International Space Station and then later, from the Earth to the Moon . This year, the vehicle continued to go through design refinements to reduce weight, meet requirements, and operate reliably while preparing for Preliminary Design Review in the summer of 2009. The design of the Orion Environmental Control and Life Support (ECLS) system, which includes the life support and active thermal control systems, is progressing through the design stage. This paper covers the Orion ECLS development from April 2008 to April 2009.

In NASA's Vision for Space Exploration, humans will once again travel beyond the confines of earth's gravity, this time to remain there for extended periods. These forays will place unprecedented demands on launch systems. They must not only blast out of earth's gravity well as during the Apollo moon missions, but also launch the supplies needed to sustain a larger crew over much longer periods. Thus all spacecraft systems, including those for the separation of metabolic carbon dioxide and water from a crewed vehicle, must be minimized with respect to mass, power, and volume. Emphasis is also placed on system robustness both to minimize replacement parts and ensure crew safety when a quick return to earth is not possible. This paper describes efforts to improve on typical packed beds of sorbent pellets by making use of structured sorbents and alternate bed configurations to improve system efficiency and reliability.

NASA is completing the development of a regenerative water recovery system (WRS) for the International Space Station (ISS). The major assemblies included in this system are the Water Processor Assembly (WPA) and Urine Processor Assembly (UPA). Test activities have been completed for the system and planning for launch and on-orbit activation is underway. This paper summarizes the status as of April 2008 and describes some of the technical challenges encountered and lessons learned over the past year.

NASA is developing a regenerative water recovery system (WRS) for deployment on the International Space Station (ISS). The major assemblies included in this system are the Water Processor Assembly (WPA) and Urine Processor Assembly (UPA). The WPA has been developed by Hamilton Sundstrand Space Systems International (HSSSI), Inc., while the UPA has been developed by the Marshall Space Flight Center (MSFC). Test and verification activities have been completed for the system and planning for launch and on-orbit activation is underway. This paper summarizes the status as of April 2007 and describes some of the technical challenges encountered and lessons learned over the past year.

The efficiency of re-useable aerospace systems requires a focus on the total operations process rather than just orbital performance. For the Multi-Purpose Logistics Module, this activity included special attention to terrestrial conditions both pre-launch and post-landing and how they inter-relate to the mission profile. Several of the efficiencies implemented by the MPLM Mission Engineering Team were NASA firsts and all served to improve the overall operations. This paper provides the integrated engineering/operations solutions to several key issues. Topics range from statistical analysis of over 30 years of atmospheric data at the launch and landing site to a new approach for operations with the Shuttle Carrier Aircraft. In each situation, the goal was to “tune” the thermal management of the overall flight system for minimizing requirement risk while optimizing power and energy performance.

Aerospace applications with requirements for large capacity heat removal (launch vehicles, platforms, payloads, etc.) typically use a liquid coolant as a thermal transport media to increase efficiency and flexibility in vehicle design. An issue with these systems, however, is susceptibility to the presence of non-condensable gas (NCG) or air. The presence of air in a coolant loop can have one or more negative consequences. It can cause loss of centrifugal pump prime, interfere with sensor readings, inhibit heat transfer, and block coolant flow to remote systems. Hardware ground processing to remove this air is also cumbersome and time consuming which drives up these recurring costs. Current systems for maintaining the system free of air are tailored and have demonstrated only moderate success.

NASA, Marshall Space Flight Center (MSFC) is developing a Urine Processor Assembly (UPA) for the International Space Station (ISS). The UPA uses Vapor Compression Distillation (VCD) technology to reclaim water from pre-treated urine. This water is further processed by the Water Processor Assembly (WPA) to potable quality standards for use on the ISS. NASA has developed this technology over the last 25-30 years. Over this history, many technical issues were solved with thousands of hours of ground testing that demonstrate the ability of the UPA technology to reclaim water from urine. In recent years, NASA MSFC has been responsible for taking the UPA technology to “flight design” maturity. This paper will give a brief overview of the UPA design and a status of the major design and development efforts completed recently to mature the UPA to a flight level.

The International Space Station (ISS) Environmental Control and Life Support (ECLS) system includes regenerative and non-regenerative technologies that provide the basic life support functions to support the crew, while maintaining a safe and habitable shirtsleeve environment. This paper provides a summary of the U.S. ECLS system activities over the past year, covering the period of time between May 2001 and April 2002. The ISS continued permanent crew operations, with Phase 2 completion accomplished during this period. Work continued on the Phase 3 elements with Node 3 proceeding toward a final design review and the regenerative ECLS equipment proceeding into manufacturing.

The Mini-Pressurized Logistics Module (MPLM), shown in Figure 1, is the primary vehicle for the transportation of equipment, scientific payloads, and supplies for use inside of the International Space Station, hence the importance of the MPLM environmental control system design. Agenzia Spaziale Italian (ASI), an International Space Station Partner (IP), will supply three MPLMs, currently being designed and fabricated by Alenia Aerospazio, Divisione Spazio, to the Space Station Program. Design oversight for this activity is being performed by NASA's Marshall Space Flight Center (MSFC).