Search Results

Since the introduction of microperforated (MP) sound absorption elements more than 40 years ago many variations of noise control devices from room acoustics to induct applications have been manufactured based on this technology. It has been demonstrated that micro-perforated elements can provide adequate IC-engine gas exchange noise attenuation. Several exhaust and inlet system silencers incorporating micro-perforated elements have been presented during the past 15 years for engine applications, encouraging the replacement of the typical fibrous materials and aiming several advantages including cleaner environment. The acoustical characteristics of the MP elements, have been studied thoroughly by several authors and good analytical models exist to predict the attenuation performance of those elements. However, almost no published information can be found regarding the reliability of the MP elements utilized in harsh engine exhaust system environment.

The acoustic impedance exhibited by a new type of element for noise control, the Micro-Grooved Elements (MGEs), has been widely investigated in this paper. The MGEs are typically composed of two overlying layers presenting macroscopic slots and a number of micro-grooves on one of the contact surfaces. The micro-grooves result in micro-channels as the layers are assembled to form the element. Similarly to Micro-Perforated Elements (MPEs), the MGEs have been proved to provide effective dissipation of acoustic energy by the means of viscous losses taking place in the micro-channels. However, in contrast to the MPEs, the MGEs use the grooves, instead of the holes, in which the air is forced to pass through. It results in more cost effective elements, which have been found to represent an adequate alternative for fibrous materials, typically present in silencer units.

Micro-grooved elements (MGEs) represent a novel technology developed for noise control in automotive, aerospace and room acoustics. The key concept of the MGEs is based on the use of micro-grooved layers forming micro-paths where the energy dissipation of the acoustic waves is primarily originated by viscous friction. Composed of a multi-layer fiber-less material, the MGEs represent a potential alternative to the traditional fibrous material based solutions as well as to the increasingly popular micro-perforated elements (MPEs). MGEs are designed as cost effective elements, found to be suitable for substitution of fibrous materials, typically present in silencer units. In this paper, a design procedure for a fiber-less small engine silencer based on MGEs is presented and experimentally validated. Hereby, the acoustical performance of the MGEs has been modeled by adapting the theoretical models provided by Allard and Maa for rectangular and circular ducts.

To respond growingly strict environmental regulations the acousticians are challenging to develop novel types of silencing elements. There are different types of flow duct elements designed for silencing the pulsating gas flows into and out of fluid machines. The silencing effect is typically achieved by introducing acoustic reflection and absorption. In order to achieve a good absorption in a wide frequency band, various fibrous materials e.g. wools are typically implemented. However, the physical properties of such materials do not often remain constant during the lifetime of a silencer. As the fibers tend to relocate and can partly be blown out to surroundings, acoustical performance may deteriorate. Therefore, it is in great interest to avoid fibrous materials in the design of the flow duct silencing elements. The present work is focused on the modern type of absorptive acoustic element - a micro-perforated element.

Regulations stipulating the design of motorcycle silencers are strict, especially when the unit incorporates fibrous absorbing materials. Therefore, innovative designs substituting such materials while still preserving acceptable level of characteristic sound are currently of interest. Micro perforated elements are innovative acoustic solutions, which silencing effect is based on the dissipation of the acoustic wave energy in a pattern of sub-millimeter apertures. Similarly to fibrous materials the micro-perforated materials have been proved to provide effective sound absorption in a wide frequency range. Additionally, the silencer is designed as a two-stage system that provides an optimal solution for a variety of exploitation conditions. In this paper a novel design for a cruiser type motorcycle silencer, based on micro-perforated elements, is presented.