Search Results

Novel acoustical materials have been developed. The materials are thermoplastic foams extruded from blends of a polypropylene (PP) resin with an ethylenic polymer resin. One material is an open-cell sheet product made from a blend of a PP resin and a polyolefin elastomer (POE). Another is a large-celled plank foam of substantially closed-cell structure made from a blend of a polypropylene resin and a low density polyethylene (PE) resin. The foam materials are of lightweight, hydrophobic, dust free, recyclable and withstand the temperatures prevailing in automotive uses.

Recent growth in automotive applications of magnesium die cast alloys has made the refining and recycling of magnesium scrap a key issue for the automotive and magnesium industries, if growth is to continue. Today, with only a few exceptions, commercially refined and recycled alloy is produced using a variety of flux-based processes. However, fluxless refining, has been the focus of growing interest, particularly for the in-house refining of scrap by the die cast producers. This paper summarizes the results of a study conducted to better understand the behavior of non-metallic contaminants in scrap melts and the requirements for their separation, using argon sparging. Brightness measurements were used to experimentally determine the distribution of non-metallic contaminants within scrap melts both before and after argon treatment.

In 1998, approximately 57,000 Tonnes of plastic composites were utilized as body panels on cars and trucks in North America. Three material types, generically labeled SMC, RIM and Thermoplastic are vying to carve a market niche from steel which dominates the market place with an estimated volume of 1 million Tonnes per year. Since plastic body panels have higher material costs but lower tooling costs, they are primarily utilized when build volumes are less than 200,000 vehicles per year or specific composite performance capabilities are demanded. This paper reviews the various performance parameters required of a body panel material and the relative strengths of Aluminum, RIM, SMC, Steel and Thermoplastics to meet these demands. A decision making process is utilized which allows for a comparison between the different materials. Since cost is so critical, it is left as an independent variable.

Continued development of Reinforced Reaction Injection Molding (RRIM) polyurea polymers for toughness, blister resistance and large-part processing as exterior vertical body panels has launched ELPO-compatible exterior outers into automotive assembly-line operations. This allows automotive OEM design to take advantage of the unique molding shapes for side outers and fenders while reducing weight, assembly (DFA) and time/operations costs (DFM). Polyurea RRIM body panels have been successful in meeting the demanding auto industry requirement for lightweight, damage-resistant exterior outer panels as an economical alternative to steel. Design freedom advantages, low prototype cost and tooling savings through predictive modelling have allowed the commercial use of RRIM body panels. This high-temperature-resistant polyurea RRIM composite allows on-line painting, including passing through the steel corrosion protection primer (E-coat) cure environments.

The effect of non-metallic inclusions (NMIs) on the properties of die cast magnesium was investigated. NMI content was quantified by a newly developed light reflectance technique. The mechanical properties of optimized AM60B test bars were found to decrease at high inclusion levels. Low inclusion levels did not statistically reduce the mechanical properties of AM60B as compared to virgin metal. Argon-refined AM60B displayed mechanical properties that were indistinguishable from virgin alloy. AZ91D test plates were die cast at various cleanliness levels. After salt spray testing, it was found that the surface quality of the castings was slightly degraded at high NMI levels. The general corrosion performance was also affected, but paint adhesion was relatively unaffected. At high NMI levels, the corrosion performance was still better than 380 A. Machinability of the AZ91D test plates was quantified by measuring tool wear and cutting forces.

Syndiotactic Polystyrene (SPS) is a new semi-crystalline polymer under development by Dow Plastics. The material is completely different from conventional styrenics in structure, physical properties and synthetic method, and represents the basis for an entirely new family of materials based on crystalline polystyrene. SPS has a melting point of 270°C (520°F) combined with excellent resistance to moisture and automotive fluids. Additionally, SPS products exhibit exceptional electrical performance and competitive toughness and stiffness. A wide range of products have been formulated for specific applications including impact-modified and glass-reinforced grades. This paper was designed to discuss the performance attributes of SPS as they relate to use of this material in automotive, interconnect systems where a combination of heat resistance, chemical resistance, dimensional stability and enhanced processability are required.

Today's interior systems design engineer has been challenged with providing significantly lighter, simpler and more cost-effective instrument panel (IP) design solutions, while simultaneously meeting rigorous occupant protection and quality standards. These issues provided the motivation behind the fully-integrated structural instrument panel design developed for Chrysler's Dodge Dakota Truck Platform. This total system design approach greatly depends on the stiffness and ductility of the engineering thermoplastic substrate and cross-sectional design for managing the energy of unrestrained occupants during frontal collisions. The structural IP consists of a fully integrated, three-piece monocoque thermoplastic structure that replaces the traditional retainer, air delivery ducts, steel beams and reinforcements typically used in IP designs.

A fully-integrated thermoplastic structural instrument panel (IP) system will be implemented on Chrysler's Dodge Dakota Truck Platform. The structural IP consists of a three-piece monocoque thermoplastic injection molded structure that replaces the traditional retainer, air delivery ducts, steel beams and reinforcements typically used in IP designs. Ribbed thermoplastic bolster systems have been incorporated as part of the energy management system. The structural IP provides the required stiffness to satisfy noise, vibration, and harshness (NVH) quality targets and the necessary strength and rigidity to effectively meet FMVSS No. 208 requirements for managing occupant and passenger air bag (PAB) deployment loading during 48 km/h (30 mph) frontal crashes.

Increased requirements for crash energy management in automotive interiors have led to increased application of magnesium alloy AM50A. Successful integration of this new alloy with hot chamber diecasting process technology requires substantial adjustment and attention to processes and practices. This paper details the conversion of magnesium AZ91D steering column diecastings to high ductility structural alloy. Description is given of the changes made to foundry practices, casting parameters, process compliance monitoring, and hot end component management. The resulting improvements allow production of components comparable to the traditional alloy in manufacturing process demands while offering improved ductility and impact strength.

The recycling of plastics from end of useful life durable goods continues to evolve as an issue. Recycle strategies need to be based on a careful understanding of sustainability for both the environmental and business domains. The definitions and processes utilized in a recycle program can dramatically affect the economic structure. These recycle programs need to be carefully constructed to minimize cash costs. There is an emerging industry, recyclers, who may become an important link in the recycle supply chain.

Structural instrument panels are an excellent alternative to traditional constructions since they can provide substantial part consolidation, weight reduction, tool and cost savings, and manufacturing and assembly simplification. In structural panels, the main energy absorbing element for decelerating an unrestrained occupant is the plastic integrated retainer-structural duct. The role of the components in the instrument panel needs to be clearly understood for adequately engineering the system and properly selecting the polymeric material for optimum system performance in the different operating environments. The present paper discusses the performance of the structural instrument panel, the engineering and design requirements, and provides guidelines for selection of materials.

The market for composite engine oil sealing components, such as valve covers and oil pans, continues to expand, replacing traditional metal stamping and die casting materials. As the market for these composite components grows, so must the understanding of the material performance characteristics and the relationship of these characteristics to the design of the part. Unlike metals, composites are viscoelastic in nature, exhibiting time-temperature dependant properties. Therefore, the traditional design approach utilizing static property data to predict long-term performance under load and over a wide temperature range will not sufficiently characterize the nonlinear property response of polymeric-based composites. A robust composite sealing design requires complete materials characterization, including long-term creep performance as a function of temperature, loading, and cycling.

The use of low density reinforced Reaction Injection Molded (RIM) substrates for covered interior automotive articles continues to increase globally. Reduced party mass, consolidation of manufacturing steps (labor), and the use of aluminum tooling, instead of steel, are cited advantages that LD-RIM offers when compared to traditional wood based and thermoplastic materials. Two RIM processes are successfully being used to produce covered interior door panels. Low density structural RIM (LD-SRIM), utilizing conventional RIM equipment, involves the placement of a pre-cut fiberglass mat in the tool cavity prior to open-pour injection of the 2-stream liquid urethane components. Low density reinforced RIM (LD-RRIM), utilizing lance cylinder RIM equipment, incorporates reinforcing fibers, such as milled fiberglass or wollastonite, in the liquid resin component. The liquid resin containing reinforcing filler is injected with the isocyanate component into a closed mold.

Syndiotactic potystyrene (SPS) is a new semi-crystalline polymer under development by Dow Plastics, a business group of The Dow Chemical Company. The material is differentiated from conventional styrenic polymers in terms of microstructure and physical properties and represents the basis for an entirely new family of materials derived from crystalline polystyrene. SPS exhibits excellent thermal performance with a melting point of 270° C (520° F) combined with resistance to moisture and automotive fluids. Products produced from SPS demonstrate exceptional electrical performance, low specific gravity, competitive toughness and high modulus relative to other semi-crystalline engineering polymers. A wide range of products have been formulated including impact modified and glass reinforced resins for use in specific markets.

The objective of this paper will be to review a novel recycle process involving Structural Reaction Injection Molding(SRIM) which enables a variety of coarsely ground plastic recycle materials to be incorporated into the molded part. What makes this approach novel, is that flexural modulus of the fabricated parts are actually increased when the recycled granulate is employed in the part. This paper will present data for the recycle of a variety of automotive parts, including painted fascia, door skins, covered interior door panels, armrests and instrument panels along with composite bumper beams into the SRIM recycle core process. Resulting part economics will be reviewed along with potential applications to utilize this technology.

The relationship between hydrogen gas and microporosity in magnesium alloy AZ91 was quantified, refuting the belief that hydrogen levels less than the maximum solid solubility are of no detriment. Sand castings were made from melts containing measured levels of hydrogen gas, and the amount of porosity was determined by density measurements. At concentrations below the maximum solid solubility, it was established that the amount of microporosity is directly proportional to the gas content. This supports the premise that dissolved hydrogen gas provides nucleation sites for microporosity, and that it is useful to remove all gas to achieve porosity-free cast parts.

The American public's desire to recycle and the predictions of future recycle mandates are motivating automotive OEMs and plastic suppliers to address the recycling of plastic materials. As a result, the OEMs and plastic industry groups have asked resin suppliers, automotive dismantlers and reprocessors to assist them in studying and developing solutions for the recovery of post-consumer automotive plastics and recycling those materials back into automotive applications. The Dow Chemical Company has been a participant in plastic industry sponsored projects and has initiated numerous research and development activities involving the recycling of automotive thermoplastic and thermoset materials, as well.

A highly reflective polymeric sheet has been invented which has a metallic appearance but contains no metal. The material can appear chrome-like, or be designed to transmit and reflect light for novel lens applications. The absence of metal waste streams and volatile organic emissions gives this technology significant environmental advantages over competitive methods of bright work or reflector fabrication. This unique optical material is non-corroding, and has the low thermal and electrical conductance of plastic. It is produced by coextruding a large number of alternating layers of polymers having a refractive index difference. This technology offers new degrees of freedom for light control in many applications including lighting reflectors, lenses, display panels, decorative trims, and energy management.

Adhesive materials are required to bond cover fabrics to most molded interior headliner substrates. Several thermoplastic adhesive films are qualified and used at U.S. and Japanese OEM's. These adhesive films offer benefits such as convenience, cost effectiveness, excellent adhesive performance and process efficiency while reducing concerns of emissions and hazardous waste handling compared to prior bonding methods. The automotive headliner part is a multifunctional component of the vehicle's interior trim. One of the main headliner functions is to reduce the interior cabin noise. Various adhesive materials are used in a lamination process to form a composite headliner. The purpose of this study was to compare the effects of this lamination process and various alternative adhesive materials on the overall acoustical performance of the headliner composite. Various headliner samples were fabricated under controlled process conditions and tested by an independent acoustics testing lab.

Fast, accurate delivery of metal to the shot well is critical to the success of any cold chamber die casting operation. For some metals this is a simple problem to solve. Magnesium, however, requires more innovative thinking. Simplicity of design is essential for reliable operation in the environment of a magnesium die casting facility. Complex control is required to provide speed and accuracy of shot delivery. Blending these two ingredients to produce a viable system produces a truly innovative shot delivery system for magnesium. Construction details of a newly developed stand alone system for the auto ladling of magnesium will be presented. Data with regard to speed and accuracy will also be presented.