Search Results

Trucks operating in inter-modal (drayage) operation in and around port and rail terminals, are responsible for a large proportion of the emissions of NOX, which are problematic for the air quality of the Houston and Dallas/Ft. Worth metro areas. A standard test cycle, called the Texas Dray Truck Cycle, was developed to represent the operation of heavy-duty diesel trucks in dray operations. The test cycle reflects the substantial time spent at idle (~45%) and the high intensity of the on-road portions. This test cycle was then used in the SAE J1321 test protocol to evaluate the effect on fuel consumption and NOX emissions of retrofitting dray trucks with light-weight, low-rolling resistance wide-single tires. In on-track testing, a reduction in fuel consumption of 8.7% was seen, and NOX emissions were reduced by 3.8% with the wide single tires compared to the conventional tires.

The work presented in this paper outlines the design and development of a new roller chain sprocket tooth form for engine camshaft drives in an effort to reduce the noise levels related to chain-sprocket meshing. The crankshaft sprocket also incorporated inclined plane Nitrile damper rings to further reduce meshing impact noise levels. Previous experimental studies have shown that roller impact during meshing is a dominant noise source in roller chain drives. Noise evaluations were conducted for several camshaft drive configurations on a 4-cylinder DOHC automotive engine in a semi-anechoic dynamometer facility. The tests included measurements of meshing frequency sound power levels and overall sound power levels. This firing engine noise and vibration experiment was done to compare the noise levels of the asymmetrical sprocket tooth profile to that of a standard ISO sprocket tooth profile.

This paper presents the results of original research conducted to evaluate the braking characteristics of passenger vehicles equipped with anti-lock braking systems (ABS) as a function of brake-pedal application force. The conditions studied in this paper are for braking on a dry, level roadway without any steering input. The objective of the paper is to study the effect of brake-pedal application force on the braking systems of common vehicles currently in-use. Comparisons are made between ABS and locked-wheel braking for each vehicle. The subject of this paper is part of the general topic of passenger vehicle dynamics and stability. Knowledge of how a vehicle performs under a variety of braking conditions is important for a variety of applications such as 1) intelligent vehicle highway systems, 2) vehicle stability and control, 3) vehicle dynamics, and 4) accident reconstruction.

This paper presents the results of original research conducted to evaluate the braking characteristics of passenger vehicles equipped with anti-lock braking systems (ABS) as a function of vehicle speed at the beginning of a braking maneuver. The conditions studied in this paper are for braking on a dry, level roadway without any steering input. The objective of the paper is to study the effect of vehicle speed on the braking systems of common vehicles currently in-use. Comparisons are made between ABS and locked-wheel braking for each vehicle. The subject of this paper is part of the general topic of passenger vehicle dynamics and stability. Knowledge of how a vehicle performs under a variety of braking conditions is important for a variety of applications such as 1) intelligent vehicle highway systems, 2) vehicle stability and control, 3) vehicle dynamics, and 4) accident reconstruction.

This paper presents the results of original research conducted to evaluate the braking characteristics of passenger vehicles equipped with anti-lock braking systems (ABS) as a function of tire inflation pressure. The conditions studied in this paper are for braking on a dry, level roadway without any steering input. The objective of the paper is to study the effect of tire inflation pressure on the braking systems of common vehicles currently in-use. Comparisons are made between ABS and locked-wheel braking for each vehicle. The subject of this paper is part of the general topic of passenger vehicle dynamics and stability. Knowledge of how a vehicle performs under a variety of braking conditions is important for a variety of applications such as 1) intelligent vehicle highway systems, 2) vehicle stability and control, 3) vehicle dynamics, and 4) accident reconstruction.

Sound pressure level (SPL) measurements of vehicle coast-by runs of a passenger vehicle were performed across a range of temperatures. A controlled test track was used for the runs with six different sets of tires. A small but significant reduction of noise level with positive temperature increases was observed for some but not all tires. The reduction was evident in two of the tires at 53 kph and five of the tires at 80 kph. The SPL of the other tires showed little or no sensitivity to temperature. Frequency analysis of the tire noise showed that noise content above 1000 Hz is most affected by temperature change and noise in the range of 1200 to 2000 Hz is particularly sensitive to temperature changes. However, differences in SPL due to speed and tire type were much greater than that due to temperature

Active control of vehicle suspension systems typically relies on linear, time-invariant, lumped-parameter dynamic models. While these models are convenient, nominally accurate, and tractable due to the abundance of linear control techniques, they neglect potentially significant nonlinearities and time-varying dynamics present in real suspension systems. One approach to improving the effectiveness of such linear control applications is to introduce time and spatially-dependent coefficients, making the model adaptable to parameter variations and unmodeled dynamics. In this paper, the authors demonstrate an intelligent parameter estimation approach, using structured artificial neural networks, to continually adapt the lumped parameters of a linear, quarter-car suspension model. Results are presented for simulated and experimental quarter-vehicle suspension system data, and clearly demonstrate the viability of this approach.

In this paper, functional analysis is employed to develop an ideal path of a vehicle undergoing a limit lane-change maneuver. Inputs to the problem are the lane width, tire-road coefficient of friction and either vehicle velocity or total longitudinal lane-change distance. Vehicle velocity is assumed to be constant. The problem is formulated using the calculus of variations. The solution technique relies on elliptic functions to achieve a closed-form solution. The synthesis of an ideal lane-change trajectory is treated as a minimal-energy-curve optimization problem with prescribed continuity and boundary conditions. The concept of critical speed is employed to limit the maximum curvature of any specified lane-change, thereby ensuring that the synthesized trajectory function describes a path that can be traversed under realistic road conditions. The analytical solution is confirmed by comparison to a numerical solution and a validated 8 degree-of-freedom vehicle model simulation.

This paper provides an exposition of the basic and some refined inertial critical speed estimation formulas. A literature review of existing inertial formulas for estimating critical cornering speed were identified for the ultimate purpose of developing a useful, compact, and more accurate speed estimation formula. Background information is presented covering the general definitions and utility of critical speed formulas. First, as a point of reference, the basic critical speed formulas are derived. Included is a list of the key assumptions on which the basic formulas are based. It is shown that the basic formulas are founded on the fundamental principles of physics and engineering mechanics; namely, Newton's Second Law and centrifugal force.

This paper covers briefly the theory of tire-road friction, coefficient of friction measurement techniques, and the vagaries of tire-road friction as they relate to critical speed estimation. A literature review of tire-road friction studies was conducted to identify the primary factors effecting the tire-road coefficient of friction. Background information is presented covering general definitions and the connection between the basic critical speed formulas and the coefficient of friction. The primary components of tire-road friction, adhesion and hysteresis, are discussed along with minor effects such as tearing, wear, waves, and roll formation. Common coefficient of friction field measuring techniques are described, including the skid-to-stop test and drag sled. Influential factors such as tire characteristics, tire inflation pressure, road conditions, and dynamic factors are reviewed.

The technology thrust to develop an effective electromagnetic actuator for application in an active suspension system has precipitated a fresh look at the active control schemes in an effort to reduce the required force levels of the actuator. The resulting “near constant force” control algorithm is described and its ability to greatly reduce vehicle sprung mass motion is documented through simulation and single wheel station laboratory test stand results. The vehicle power and energy requirements associated with this unwanted vehicle vertical are analyzed and comparisons between the corresponding passive and active systems are presented. The success of the active system leads naturally to the conclusion that a passive suspension equipped vehicle will become power limited at a much lower speed than will this active system when traversing severe cross-country terrain.