Refine Your Search

Date

Date

Topic

Topic

A-20B Exterior Lighting Committee Maintenance and Aftermarket Electronic equipment Materials handling Humidity Human Factors and Ergonomics

Search Results

Viewing 1 to 20 of 26
12Next >Last >>
Sort by published
Standard

Some Factors Affecting Visibility of Aircraft Navigation and Anticollision Lights
2023-09-08
WIP
AIR1106C
The scope of this SAE Aerospace Information Report (AIR) is to discuss factors affecting visibility of aircraft navigation and anticollision lights, enabling those concerned with their use to have a better technical understanding of such factors, and to aid in exercising appropriate judgment in the many possible flight eventualities.
Standard

Position and Anticollision Lights - Fixed-Wing Aircraft
2023-09-06
WIP
ARP991D
This document recommends design objectives for navigation, position, and anticollisionlight systems for visual detection and collision avoidance between airplanes in flight and on the ground. Customers for new airplanes or lighting components, and designers or manufacturers may take advantage of this document in specifying the initial requirements that, in most cases, significantly exceed the applicable minimum intensities as shown in the Federal Aviation Regulations as well provide better stability, longer life and lower operating costs.
Standard

Landing and Taxiing Lights - Design Criteria for Installation
2023-03-23
WIP
ARP693F
This document includes requirements of installations of adequate landing and taxiing lighting systems in aircraft of the following categories: a. Single engine personal and/or liaison type b. Light twin engine c. Large multiengine propeller d. Large multiengine turbojet/turbofan e. Military high-performance fighter and attack f. Helicopter This document will cover general requirements and recommended practices for all types of landing and taxi lights. More specific recommendations for LED lights in particular can be found in ARP6402.
Standard

Lighting for Camera Video Systems
2023-01-11
WIP
ARP8467
The scope of this ARP is area lighting requirements for commercial airplane camera video systems. Specifically, lighting recommendations are given for the GMCS (ground maneuver camera system) and FDEVSS (flight deck entry video surveillance system). This ARP affects all three A-20 Aircraft Lighting Committees: crew station flight deck, exterior, and interior. Future updates could include military applications.
Standard

Exterior Lighting Recommendations for Urban Air Mobility and Electric Vertical Takeoff and Landing Aircraft
2022-10-12
WIP
ARP7216
This document covers external lighting for Electric Vertical Takeoff and Landing (E-VTOL) and Urban Air Mobility (UAM) vehicles. It discusses lights that may be installed both to meet regulatory requirements as well as for customer comfort and aircraft recognition. It also discusses the differences between UAM vehicles and other aircraft and how those differences impact the lighting.
Standard

Optical Simulation and Analysis for Aircraft Lighting
2022-06-27
CURRENT
ARP6833
This document contains guidance for designers, specifiers, regulatory personnel, purchasers, managers, and others who specify or use optical simulations of aircraft lights. All aircraft lighting will be considered interior, flight deck, and exterior lighting. Guidance on standard methods of analysis and presentation of data will be provided. Although this document concentrates on lighting, many of the principles covered will be helpful in other types of optical simulation, such as for displays, non-visible radiation, etc.
Standard

Minimum Performance Standard for Aircraft Position Lights
2022-02-02
CURRENT
AS8037D
This SAE Aerospace Standard (AS) establishes minimum performance standards for new equipment position lights. This SAE Aerospace Standard (AS) defines minimum and maximum light intensity in terms of candelas in vertical and horizontal directions about the longitudinal, vertical, and lateral axes of the aircraft. It also defines color tolerances in terms of limiting chromaticities for the light emitted from the position lights. It is not intended that this standard require the use of any particular light source such as quartz-halogen, incandescent, or any other specific design of lamp.
Standard

High Intensity Discharge Light Sources
2020-08-10
CURRENT
ARP5647B
This SAE Aerospace Recommend Practice (ARP) is intended to identify both safety related best practices and unique design considerations of metal halides High Intensity Discharge (HID) lamps and power supplies in aircraft applications.
Standard

Some Factors Affecting Visibility of Aircraft Navigation and Anticollision Lights
2018-08-13
CURRENT
AIR1106B
The scope of this SAE Aerospace Information Report (AIR) is to discuss factors affecting visibility of aircraft navigation and anticollision lights, enabling those concerned with their use to have a better technical understanding of such factors, and to aid in exercising appropriate judgment in the many possible flight eventualities.
Standard

Minimum Performance Standard for Anticollision Light Systems
2017-08-24
CURRENT
AS8017D
This SAE Aerospace Standard (AS) establishes minimum performance standards for new equipment anticollision light systems. This Aerospace Standard defines minimum light intensity in terms of "effective intensity" as defined in paragraph 3.5 of this standard and specified vertical and horizontal directions about the longitudinal and vertical axis of the airplane. It will also define flash rate and color for the anticollision light system. It is not intended that this standard require the use of any particular light source such as Xenon, LED or any other specific design of lamp.
Standard

Design Requirements and Test Procedures for Dual Mode Exterior Lights
2016-05-06
HISTORICAL
ARP5825A
This SAE Aerospace Recommended Practice (ARP) contains the general requirements and test procedures for Dual Mode (NVIS Friendly visible and Covert) exterior lighting for most rotorcraft and fixed wing aircraft and could be applicable to ground vehicles that desire a Dual Mode lighting system.
Standard

High Intensity Discharge Light Sources
2014-04-03
HISTORICAL
ARP5647A
This SAE Aerospace Recommend Practice (ARP) is intended to identify both safety related best practices and unique design considerations of metal halides High Intensity Discharge (HID) lamps and power supplies in aircraft applications.
Standard

Minimum Performance Standard for Aircraft Position Lights
2013-07-09
HISTORICAL
AS8037C
This SAE Aerospace Standard (AS) establishes minimum performance standards for new equipment position lights. This Aerospace Standard defines minimum light intensity in terms of candelas in vertical and horizontal directions about the longitudinal, vertical, and lateral axes of the aircraft. It also defines color tolerances in terms of limiting chromaticities for the light emitted from the position lights. It is not intended that this standard require the use of any particular light source such as quartz-halogen, incandescent, or any other specific design of lamp.
Standard

LED Landing, Taxiing, Runway Turnoff, and Recognition Lights
2011-06-21
HISTORICAL
ARP6402
This document includes recommendations of installations of adequate landing and taxiing lighting systems in aircraft of the following categories: a Single engine personal and/or liaison type b Light twin engine c Large multiengine propeller d Large multiengine turbojet e Military high performance fighter and attack f Helicopter which are subject to the following CFR Parts certification: Part 23 – Airworthiness Standards: Normal, Utility, Acrobatic and Commuter Aircrafts Part 25 – Airworthiness Standards: Transport Category Aircrafts Part 27 – Airworthiness Standards: Normal Category Rotorcraft Part 29 – Airworthiness Standards: Transport Category Rotorcraft
Standard

Minimum Performance Standard for Anticollision Light Systems
2011-06-20
HISTORICAL
AS8017C
This SAE Aerospace Standard (AS) establishes minimum performance standards for new equipment anticollision light systems. This Aerospace Standard defines minimum light intensity in terms of "effective intensity" as defined in paragraph 3.5 of this standard and specified vertical and horizontal directions about the longitudinal and vertical axis of the airplane. It will also define flash rate and color for the anticollision light system. It is not intended that this standard require the use of any particular light source such as Xenon, LED or any other specific design of lamp.
Standard

Minimum Performance Standard for Aircraft Position Lights
2011-03-17
HISTORICAL
AS8037B
This SAE Aerospace Standard (AS) establishes minimum performance standards for new equipment position lights. This Aerospace Standard defines minimum light intensity in terms of candelas in vertical and horizontal directions about the longitudinal, vertical, and lateral axes of the aircraft. It also defines color tolerances in terms of limiting chromaticities for the light emitted from the position lights. It is not intended that this standard require the use of any particular light source such as quartz-halogen, incandescent, or any other specific design of lamp.
Standard

Landing and Taxiing Lights - Design Criteria for Installation
2006-06-28
HISTORICAL
ARP693C
This document includes requirements of installations of adequate landing and taxiing lighting systems in aircraft of the following categories: a Single engine personal and/or liaison type b Light twin engine c Large multiengine propeller d Large multiengine turbojet e Military high performance fighter and attack f Helicopter
Standard

Design Requirements and Test Procedures for Dual Mode Exterior Lights
2005-07-13
HISTORICAL
ARP5825
This SAE Aerospace Recommended Practice (ARP) contains the general requirements and test procedures for Dual Mode (NVIS Friendly visible and Covert) exterior lighting for most rotorcraft and fixed wing aircraft and could be applicable to ground vehicles that desire a Dual Mode lighting system.
Standard

Some Factors Affecting Visibility of Aircraft Navigation and Anticollision Lights
2004-02-05
HISTORICAL
AIR1106A
The scope of this Aerospace Information Report (AIR) is to discuss factors affecting visibility of aircraft navigation and anticollision lights, enabling those concerned with their use to have a better technical understanding of such factors, and to aid in exercising appropriate judgement in the many possible flight eventualities.
12Next >Last >>
X