Search Results

Standard

Air Cargo Unit Load Devices – Testing Methods

2022-06-27

WIP

AS36102C

This SAE Aerospace Standard (AS) specifies the testing methods to be used to substantiate performance of air cargo containers, pallets and nets (Unit Load Devices) for airworthiness approval in accordance with NAS 3610 or AS36100.

Standard

Wide-Body and Standard-Body Aircraft Lower Deck Cargo Compartment ULD Capacities

2022-05-04

CURRENT

AIR1869D

This SAE Aerospace Information Report (AIR) covers information relative to ULDs (Unit Load Devices) container and pallet configurations, maximum usable container, pallet and bulk compartment volumes and tare weights for the lower deck of various wide-body aircraft. Bulk compartment volumes are also included for standard-body aircraft.

Standard

General Requirements for Noncertified Cargo/Baggage Containers

2018-10-18

CURRENT

AS1677D

This SAE Aerospace Standard (AS) covers the design, fabrication, performance and operational testing requirements for lower deck containers for use in main line aircraft which do not require airworthiness certification when loaded under the conditions of compartment restraint and in accordance with the aircraft's Weight and Balance Manual and/or, where applicable according to the aircraft type's approved Weight and Balance Manual, AS36100A or NAS 3610 equivalent base plate restraint for these containers. Most sizes of containers covered by this document (base sizes K, L, P, and Q) cannot physically be loaded and latched on aircraft main deck cargo systems. Base size A and M containers can, but are not allowed on aircraft main decks, which do not accept non-certified units. Accordingly, all containers covered by this document are to be used/installed exclusively in aircraft lower deck compartments.

Standard

Air and Air/Surface (Platform) Cargo Pallet Nets

2018-10-18

CURRENT

AS1131C

This SAE Aerospace Standard (AS) provides dimensional, structural and environmental requirements for pallet nets to be used in conjunction with 2.44 m (8 ft) wide pallets described in AS1130. The pallet/net combination are used in freighter versions of certificated aircraft equipped to provide restraint to pallets tested to the requirements of NAS 3610 Class II restraint system. The minimum essential criteria are identified by use of the key word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be primary importance in providing serviceable, economical, and practical air transport pallet nets. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternate methods to be satisfactory.

Standard

Stand, Shipboard, Helicopter Maintenance

2017-11-06

CURRENT

AS85376

This specification covers a helicopter maintenance stand used by personnel aboard aviation capable ships.

Standard

DRUMS, METAL, REUSABLE SHIPPING AND STORAGE

2017-11-06

CURRENT

AS24347

Standard

Drum, Metal Reusable, Shipping and Storage (Cap. from 88 to 510 Cubic Inches)

2017-11-06

CURRENT

AS6055

This specification covers the requirements for new reusable cylindrical drums consisting of body, cover, gasket, and closing device(s) to be used as interior and exterior shipping containers.

Standard

TIE DOWN ASSEMBLY, HELICOPTER BLADE CH-53 HELICOPTER

2017-11-05

CURRENT

AS85075/2

Standard

TIE DOWN ASSEMBLY, HELICOPTER BLADE CH-46 HELICOPTER

2017-11-05

CURRENT

AS85075/1

Standard

Drum, Metal-Shipping and Storage

2017-11-03

CURRENT

AS6054

This specification covers new cylindrical drums to be used as exterior shipping containers (see 6.1).

Standard

Covers, Aircraft Components, General Requirements For

2017-11-03

CURRENT

AS5778

This specification covers general requirements for covers intended to protect the following aircraft parts: Cockpit Fuselage Canopy Engine Armament Propeller or Rotor Miscellaneous

Standard

Tie Down Assembly, Helicopter Blade, General Specification For

2017-11-03

CURRENT

AS85075

This specification covers the tie down assemblies for use on helicopter blades.

Standard

Slings, Aircraft, General Specification For

2017-11-03

CURRENT

AS5944

This specification covers the general requirements for aircraft slings used to lift and transport aircraft or aircraft components which may be bulky or fragile.

Standard

Cargo Restraint Straps - Design Criteria and Testing Methods

2017-05-08

CURRENT

AS5385D

This SAE Aerospace Standard (AS) aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22250 N (5000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain cargo on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main/upper deck cargo systems and meeting the requirements of NAS 3610 or AS36100, or b non-unitized individual pieces of cargo, or pieces of, cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.

Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters

2016-06-06

HISTORICAL

AS36100B

This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).

Standard

Air Mode General Purposes Containers

2014-03-25

CURRENT

AS4041B

This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m × 2.44 m (8 ft × 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.

Standard

Tie Down, Cargo, Aircraft, Type C-2

2013-03-15

CURRENT

AS6480B

This specification covers one type of aircraft cargo tie down, designated Type C-2.

Standard

Universal Horizontal Field Maintenance Stand for 10,000 pound Weight Class Propulsion Units (48 inch and 30 inch Rail Gage)

2012-12-05

CURRENT

ARP581B

This recommended practice covers a rail concept stand that may be used for horizontal disassembly and reassembly, and maintenance, incorporating certain design features which are defined herein. These features include the rail dimensions and width, length and height of stand to insure compatibility with rail concept type transport and positioning trailers.

Standard

Nomenclature Guide for Propulsion Systems Support Equipment

2012-12-05

CURRENT

ARP480C

This document lists recommended noun titles for drawings of support equipment and provides definitions for each. The use of secondary modifiers to distinguish a part from similar parts is also covered.

Standard

Universal Turnover Build-Up Stand for Small Propulsion Units Requiring Vertical Assembly

2012-12-05

CURRENT

ARP863B

This recommended practice covers a stand that may be used for assembly, disassembly, and maintenance. The stand incorporates the following design criteria: complete interchangeability of any and all components, collapsible frame construction, envelope dimensions (marked with an asterisk on the attached drawings), attachment pad configuration, and gearbox and caster specifications.