Standard
In-Process Welding of Castings
2022-09-15
WIP
AMS2694D
This specification defines the requirements for in-process correction of foundry discontinuities by manual welding of castings.
Search Results
Standard
Plating of Aluminum for Solderability Zinc Immersion Pre-Treatment Process
2022-07-19
CURRENT
AMS2420F
This specification covers the requirements for preparation of aluminum and aluminum alloys for soldering by zinc immersion pre-treatment followed by copper plating and tin or tin-zinc alloy plating.
Standard
Rotary Flap Peening of Metal Parts
2022-04-14
CURRENT
AMS2590C
This specification covers procedures and requirements for peening of metal parts with portable, bonded-shot, rotary flap assemblies in accordance with AS2592. The principles of rotary flap peening are similar to conventional shot peening, except conversion of arc height values using the magnetic test strip holder is required for intensity determination.
Standard
Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
2022-03-29
CURRENT
AMS2451/4E
This specification establishes the requirements for brush plating of cadmium by electrodeposition.
Standard
Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
2021-11-03
CURRENT
AMS2642F
This specification covers a procedure, typically referred to as Blue Etch Anodize, for revealing the macrostructure and microstructure of selected titanium alloys.
Standard
Carburizing and Heat Treatment of Carburizing Grade Steel Parts
2021-09-15
CURRENT
AMS2759/7E
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS2759, establishes the requirements and procedures for three classes of gas, vacuum, liquid, and low pressure (LPC) carburizing and related heat treatment of parts fabricated from carburizing grade steels. Parts made from steels other than those specified in the detail specifications may be heat treated in accordance with the applicable requirements using processing temperatures, times, and other parameters recommended by the material producer unless otherwise specified by the purchaser. This specification does not cover pack carburizing.
Standard
Salts, Heat-Treating (For Metals)
2021-08-06
CURRENT
AMS2821
This specification covers the procurement of granular heat-treating salts suitable for use in the molten state.
Standard
Flux, Aluminum Welding
2019-08-20
CURRENT
AMS3414F
This specification covers an aluminum welding flux in the form of powder.
Standard
Etch Inspection of High Strength Steel Parts
2019-07-15
CURRENT
AMS2649D
This specification establishes the requirements for etch inspection of steel parts to detect overheating (rehardening or overtempering) caused by abusive machining or grinding, or to detect localized discontinuous carburization.
Standard
Rotary Flap Peening of Metal Parts
2019-01-04
HISTORICAL
AMS2590B
This specification covers procedures and requirements for peening of metal parts with portable, bonded-shot, rotary flap assemblies in accordance with AS2592. The principles of rotary flap peening are similar to conventional shot peening, except conversion of arc height values using the magnetic Almen test strip holder is required for intensity determination.
Standard
Periodic Test for Processing Solutions
2019-01-01
CURRENT
ARP4992B
This SAE Aerospace Recommended Practice (ARP) describes a method for classifying the frequencies of analysis of solutions used in the processing of metals, such as electroplating, anodizing, and conversion coating and associated processes but usage is not limited to such applications.
Standard
In-Process Welding of Castings
2018-08-23
CURRENT
AMS2694C
This specification defines the requirements for in-process correction of foundry discontinuities by manual welding of castings.
Standard
Plating, Brush, Tin-Zinc Low Hydrogen Embrittlement
2018-06-15
HISTORICAL
AMS2451/10B
This specification covers the requirements for brush plating of tin-zinc by electrodeposition.
Standard
Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
2017-12-11
HISTORICAL
AMS2451/4D
This specification establishes the requirements for brush plating of cadmium by electrodeposition.
Standard
Plating, Brush, Nickel Low Stress, Low-Hardness Deposit
2017-11-21
HISTORICAL
AMS2451/3C
This specification covers the requirements for brush plating of low-hardness, low-stress nickel by electrodeposition.
Standard
Treatment of Sheet Metal Parts Corrosion-Resistant Steel
2017-09-20
CURRENT
AMS2550F
This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic Corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.
Standard
Parallel Gap Welding Microelectronic Interconnections to Thin Film Substrates
2017-09-19
CURRENT
AMS2690D
This specification defines the equipment, procedures, and requirements for joining leads by parallel gap resistance welding.
Standard
Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
2017-03-17
HISTORICAL
AMS2451/4C
This specification establishes the requirements for brush plating of cadmium by electrodeposition.
Standard
Plating, Brush, Nickel Low Stress, Low-Hardness Deposit
2016-11-29
HISTORICAL
AMS2451/3B
This specification covers the requirements for brush plating of low-hardness, low-stress nickel by electrodeposition.
Standard
Rotary Flap Peening of Metal Parts
2016-11-15
HISTORICAL
AMS2590A
This specification covers procedures and requirements for peening of metal parts with portable, bonded-shot, rotary flap assemblies in accordance with AS2592. The principles of rotary flap peening are similar to conventional shot peening, except conversion of arc height values using the magnetic Almen test strip holder is required for intensity determination.
