Refine Your Search

Topic

Search Results

Standard

Basic Composite Repair Technician Certification Standard

2019-09-10
ARP6262A
It is recognized that the structural integrity of repaired composite structures depends upon the capabilities of the individuals who are responsible for performing the repairs. This document is intended to address repairs of composite structure regardless of the type of structure such as marine, wind turbine, automotive, aircraft, or other applications. This certification standard establishes the minimum requirements for training, examining, and certifying composite structure repair personnel. It establishes criteria for the certification of personnel requiring appropriate knowledge of the technical principles underlying the composite structural repairs they perform. Persons certified under this document may be eligible for licensing or certification/ qualification by an appropriate authority, in addition to this industry accepted basic composite repair technician certification.
Standard

Vacuum Bagging of Thermosetting Composite and Metalbond Repairs

2018-01-10
ARP5143A
This Aerospace Recommended Practice (ARP) describes methods of vacuum bagging, a process used to apply pressure in adhesive bonding and heat curing of thermosetting composite materials and metalbond for commercial aircraft parts. If this document is used for the vacuum bagging of other than thermosetting composite materials and metalbond, the fitness for this purpose must be determined by the user. The methods shall only be used when specified in an approved Repair Document or with the agreement of the Original Equipment Manufacturer (OEM).
Standard

Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin

2014-04-11
AMS2980/5A
This Material Specification defines the requirements of carbon fiber fabric and epoxy resin systems used for wet lay-up repair of carbon fiber reinforced epoxy structures, qualified according to AMS2980/1 and AMS2980/2. Unless otherwise specified by the drawing, the order or the inspection schedule, the present specification shall be used in conjunction with the referenced documents.
Standard

Basic Composite Repair Technician Certification Standard

2014-02-13
ARP6262
It is recognized that the structural integrity of repaired composite structures depends upon the capabilities of the individuals who are responsible for performing the repairs. This document is intended to address repairs of composite structure regardless of the type of structure such as marine, wind turbine, automotive, aircraft, or other applications. This certification standard establishes the minimum requirements for training, examining, and certifying composite structure repair personnel. It establishes criteria for the certification of personnel requiring appropriate knowledge of the technical principles underlying the composite structural repairs they perform. Persons certified under this document may be eligible for licensing or certification/ qualification by an appropriate authority, in addition to this industry accepted basic composite repair technician certification.
Standard

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 1 - General Requirements

2011-04-06
AMS3970/1A
AMS3970/1 gives information about the technical requirements and qualification procedure for carbon fiber fabric epoxy prepreg and a companion non-structural glass prepreg used for repair of carbon fiber reinforced epoxy structures. The prepreg system may include a film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests.
Standard

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 6 - Material Specification: Carbon Fiber Fabric Reinforced Epoxy Prepreg for Repair, Plain Weave Fabric, 193 g/m2, Adhesive Film for Repair and Non-Structural Glass Fiber Fabric Reinforced Epoxy Prepreg, 105 g/m2

2011-04-01
AMS3970/6
This Material Specification defines the requirements of carbon fiber reinforced epoxy prepreg for repair, 120 °C (250 °F) Vacuum curing, Plain Weave Fabric, 193 g/m2 and a companion non-structural glass fiber fabric reinforced epoxy prepreg, 105 g/m2, qualified according to AMS3970/1 and AMS3970/2 for aerospace application. The prepreg system may include an epoxy film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests. If included, the requirements to be met by the adhesive are also defined in this document.
Standard

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 2 - Qualification Program for Fiber, Fabric, Carbon Prepreg, Film Adhesive and Non-Structural Glass Prepreg

2011-04-01
AMS3970/2A
AMS3970/2 gives specific information about the qualification program for carbon fiber reinforced epoxy structural repair prepreg systems, applicable for 120 °C (250 °F) vacuum curing. The prepreg system may include an epoxy film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests.
Standard

Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Material Specification: Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin

2006-01-26
AMS2980/5
This Material Specification defines the requirements of carbon fiber fabric and epoxy resin systems used for wet lay-up repair of carbon fiber reinforced epoxy structures, qualified according to AMS 2980/1 and 2980/2. Unless otherwise specified by the drawing, the order or the inspection schedule, the present specification shall be used in conjunction with the referenced documents.
Standard

Vacuum Bagging of Thermosetting Composite Repairs

2002-07-26
ARP5143
This Aerospace Recommended Practice (ARP) describes methods of vacuum bagging, a process used to apply pressure in adhesive bonding and heat curing of thermosetting epoxy and polyester matrix fabrications for commercial aircraft composite parts. If this document is used for the vacuum bagging of other than thermosetting epoxy and polyester materials, the fitness for this purpose must be determined by the user. The methods shall only be used when specified in an approved repair document or with the agreement of the Original Equipment Manufacturer (OEM) or regulatory authority.
X