Refine Your Search

Date

Date

Topic

Topic

Alloys Fuels and Energy Sources Aluminum alloys Tests and Testing Machining processes Manufacturing AMS CACRC Commercial Aircraft Composite Repair Committee

Search Results

Viewing 1 to 20 of 62
123Next >Last >>
Sort by published
Standard

Composite and Bonded Structure Inspector: Training Document
2023-10-06
CURRENT
AIR5279A
This document provides recommendations concerning the minimum knowledge and skill guidelines for a composite and metal bond repair inspector. Teaching levels have been assigned to this curriculum to define the knowledge, skills and abilities needed to inspect repairs. Minimum hours of instruction have been provided to ensure adequate lecture and laboratory coverage of all subject matter. These minimums may be exceeded, and may include an increase in the total number of training hours and/or increases in the teaching levels.
Standard

Impregnation of Dry Fabric and Ply Lay-Up
2023-08-14
CURRENT
ARP5319
This SAE Aerospace Recommended Practice (ARP) describes and gives general guidelines on use and applicability of standard methods for impregnating dry fabric and lay-up of the impregnated plies. The methods of impregnating dry fabric and ply lay-up described in this document have specific application and are not interchangeable. The methods should only be used when specified in an approved repair procedure or with the agreement of the Original Equipment Manufacturer (OEM) or regulatory authority.
Standard

Vacuum Bagging of Thermosetting Composite and Metalbond Repairs
2023-08-14
CURRENT
ARP5143A
This Aerospace Recommended Practice (ARP) describes methods of vacuum bagging, a process used to apply pressure in adhesive bonding and heat curing of thermosetting composite materials and metalbond for commercial aircraft parts. If this document is used for the vacuum bagging of other than thermosetting composite materials and metalbond, the fitness for this purpose must be determined by the user. The methods shall only be used when specified in an approved Repair Document or with the agreement of the Original Equipment Manufacturer (OEM).
Standard

Mixing Resins, Adhesives and Potting Compounds
2022-02-02
CURRENT
ARP5256A
This SAE Aerospace Recommended Practice (ARP) describes and gives general guidelines on use and applicability of the standard method for mixing resins, adhesives, and potting compounds.
Standard

Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin
2021-09-24
CURRENT
AMS2980/5A
This Material Specification defines the requirements of carbon fiber fabric and epoxy resin systems used for wet lay-up repair of carbon fiber reinforced epoxy structures, qualified according to AMS2980/1 and AMS2980/2. Unless otherwise specified by the drawing, the order or the inspection schedule, the present specification shall be used in conjunction with the referenced documents.
Standard

Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 0 - Introduction
2021-09-23
CURRENT
AMS2980B
This document (Technical Specification) gives information about qualification rules and the relation between the different specification parts involved, such as Technical Specification (TS), Material Specification (MS), and Purchasing Specification (PS). The link to material qualification and qualified products is presented.
Standard

DRYING OF THERMOSETTING COMPOSITE MATERIALS
2021-05-14
CURRENT
ARP4977
This SAE Aerospace Recommended Practice (ARP) describes standard methods for drying commercial aircraft composite structures prior to repair and gives general guidelines on use and applicability. It addresses the removal of liquids that have collected inside the structures through open damage, microcracks, or porosity and the removal of absorbed moisture from the composite material. The methods described in this document shall only be used when specified in an approved repair document or with the agreement of the original equipment manufacturer (OEM) or regulatory authority. If this document is used for the drying of materials other than thermosetting composite materials, the fitness for this purpose must be determined by the user.
Standard

Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 2 - Qualification Program for Fiber, Carbon Fiber Tape Prepreg, and Film Adhesive
2021-02-23
CURRENT
AMS6885/2
AMS6885/2 gives specific information about the qualification program for unidirectional carbon fiber tape epoxy repair prepreg capable of curing under vacuum for repair of carbon fiber reinforced epoxy structures. The prepreg system shall include an epoxy film adhesive to be applied in a co-bonding process with the prepreg for solid laminate and sandwich bonding.
Standard

Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 1 - General Requirements
2021-02-23
CURRENT
AMS6885/1
AMS6885/1 gives information about the technical requirements and qualification procedure for unidirectional carbon fiber tape epoxy repair prepreg capable of curing under vacuum for repair of carbon fiber reinforced epoxy structures. The repair system includes an epoxy film adhesive to be applied in a co-bonding process with the prepreg for solid laminate and sandwich bonding.
Standard

Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 3 - Purchasing Specification for Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg
2021-02-22
CURRENT
AMS6885/3
This Purchasing Specification, AMS6885/3, specifies the batch release and delivery requirements for unidirectional carbon fiber tape epoxy prepreg used for repair. This specification is applicable only when the unidirectional carbon fiber tape epoxy prepreg is used as part of the repair system defined in AMS6885 and AMS6885/1. This specification also defines the procedure and requirements for storage life extension of materials purchased against this specification. It is only applicable for materials qualified against AMS6885 (refer to PRI-QPL-AMS6885) and shall be carried out within the responsibility of the purchaser and under control of its Quality organisation.
Standard

Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive
2021-02-22
CURRENT
AMS6885/4
This Purchasing Specification, AMS6885/4, specifies the batch release and delivery requirements for film adhesive used for repair. This specification is applicable only when the film adhesive is used as part of the repair system defined in AMS6885 and AMS6885/1. This specification also defines the procedure and requirements for storage life extension of materials purchased against this specification. It is only applicable for materials qualified against AMS6885 (refer to PRI-QPL-AMS6885), and shall be carried out within the responsibility of the purchaser and under control of its Quality organisation.
Standard

Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 5 - Material Specification for Unidirectional Carbon Fiber Tape Epoxy Prepreg for Repair and Film Adhesive for Repair, 120 to 145 °C (250 to 290 °F) Curing
2021-02-22
CURRENT
AMS6885/5
AMS6885/5 is the Material Specification (MS) which defines the requirements of a unidirectional carbon fiber tape epoxy repair prepreg capable of curing under vacuum for repair of carbon fiber reinforced epoxy structures. It also defines the requirements of an epoxy film adhesive to be applied in a co-bonding process with the prepreg for solid laminate and sandwich bonding.
Standard

Guidelines for Repair Process Evaluation of Aluminum Bonded Structure
2020-10-15
WIP
AIR6291A
This SAE Aerospace Information Report (AIR) is intended to be used as a process verification guide for evaluating implementation of key factors in repair of metal bond parts or assemblies in a repair shop environment. This guide is to be used in conjunction with a regulatory approved and substantiated repair, and is intended to promote consistency and reliability.
Standard

Identification and Assessment of Damage to Composite Aircraft Structures Training Document
2020-08-03
CURRENT
AIR6825
Individuals who complete the applicable modules aligned with this training document will be able to define the type of damage, define the extent of damage, determine if further inspection is required, evaluate the damage against published allowable damage limits, and provide accurate documentation of the damage. The intended outcome of the training is increased safety such that no aircraft is released with unknown damage and that the aircraft meets continued airworthiness requirements. The goal is to change the culture from damage discovery to damage reporting while also reducing or eliminating flight delays due to incorrect or insufficient information. Teaching levels have been assigned to the curriculum to define the knowledge, skills, and abilities graduates will need. Minimum hours of instruction have been provided to ensure adequate coverage of all subject matter including lecture and practical exercise.
Standard

Masking and Cleaning of Epoxy and Polyester Matrix Thermosetting Composite Materials
2020-02-28
WIP
ARP4916A
This SAE Aerospace Recommended Practice (ARP) describes methods of masking and cleaning commercial aircraft, epoxy and polyester matrix, composite parts prior to their entry into the composites shop, masking and cleaning of on-wing repair areas in preparation for carrying out repairs and wipe cleaning during repair and prior to bonding. It this document is used for the masking or cleaning of materials other than epoxy and polyester matrix thermosetting composite materials, the fitness for this purpose must be determined by the user.

The methods of masking and cleaning described in this document have specific limited application and are not interchangeable. The methods shall only be used when specified in an approved repair procedure or with the agreement of the Original Equipment Manufacturer (OEM) or regulatory authority.

123Next >Last >>
X