Search Results

This PS, AMS2980/3, specifies the batch release and delivery requirements for carbon fiber and carbon fabric used for wet lay-up repair purposes.

This PS, AMS2980/4, specifies the batch release and delivery requirements for epoxy resin systems (base resin and curing agent) used for wet lay-up repair purposes.

This Purchasing Specification, AMS6885/3, specifies the batch release and delivery requirements for unidirectional carbon fiber tape epoxy prepreg used for repair. This specification is applicable only when the unidirectional carbon fiber tape epoxy prepreg is used as part of the repair system defined in AMS6885 and AMS6885/1. This specification also defines the procedure and requirements for storage life extension of materials purchased against this specification. It is only applicable for materials qualified against AMS6885 (refer to PRI-QPL-AMS6885) and shall be carried out within the responsibility of the purchaser and under control of its Quality organisation.

This Purchasing Specification, AMS6885/4, specifies the batch release and delivery requirements for film adhesive used for repair. This specification is applicable only when the film adhesive is used as part of the repair system defined in AMS6885 and AMS6885/1. This specification also defines the procedure and requirements for storage life extension of materials purchased against this specification. It is only applicable for materials qualified against AMS6885 (refer to PRI-QPL-AMS6885), and shall be carried out within the responsibility of the purchaser and under control of its Quality organisation.

It is recognized that the structural integrity of repaired composite structures depends upon the capabilities of the individuals who are responsible for performing the repairs. This document is intended to address repairs of composite structure regardless of the type of structure such as marine, wind turbine, automotive, aircraft, or other applications. This certification standard establishes the minimum requirements for training, examining, and certifying composite structure repair personnel. It establishes criteria for the certification of personnel requiring appropriate knowledge of the technical principles underlying the composite structural repairs they perform. Persons certified under this document may be eligible for licensing or certification/ qualification by an appropriate authority, in addition to this industry accepted basic composite repair technician certification.

AMS3970/4 specifies the batch release and delivery requirements for film adhesive used for repair. This specification is applicable only when the film adhesive is used as part of the prepreg system as defined in AMS3970 and AMS3970/1.

The PS, AMS3970/3, specifies the batch release and delivery requirements for carbon fiber fabric epoxy prepreg used for repair.

The PS, AMS3970/5, specifies the batch release and delivery requirements for the companion non-structural glass fiber fabric prepreg.

This document provides recommendations concerning the minimum knowledge and analytical skill guidelines for a composite and metal bond repair design engineer. Teaching levels have been assigned to this curriculum to define the knowledge, skills and abilities needed to design appropriate repairs. Minimum hours of instruction have been provided to ensure adequate lecture and laboratory coverage of all subject matter. These minimums may be exceeded, and may include an increase in the total number of training hours and/or increases in the teaching levels.

This document provides recommendations concerning the minimum knowledge and skill guidelines for a composite and metal bond repair inspector. Teaching levels have been assigned to this curriculum to define the knowledge, skills and abilities needed to inspect repairs. Minimum hours of instruction have been provided to ensure adequate lecture and laboratory coverage of all subject matter. These minimums may be exceeded, and may include an increase in the total number of training hours and/or increases in the teaching levels.

It is recognized that the structural integrity of repaired composite structures depends upon the capabilities of the individuals who are responsible for performing the repairs. This document is intended to address repairs of composite structure regardless of the type of structure such as marine, wind turbine, automotive, aircraft, or other applications. This certification standard establishes the minimum requirements for training, examining, and certifying composite structure repair personnel. It establishes criteria for the certification of personnel requiring appropriate knowledge of the technical principles underlying the composite structural repairs they perform. Persons certified under this document may be eligible for licensing or certification/ qualification by an appropriate authority, in addition to this industry accepted basic composite repair technician certification.

This PS specifies the batch release and delivery requirements for epoxy resin systems (base resin and curing agent) used for wet lay-up repair purposes.

This PS specifies the batch release and delivery requirements for carbon fiber and carbon fabric used for wet lay-up repair purposes.

This document (Technical Specification) gives information about qualification rules and the relation between the different specification parts involved, such as Technical Specification (TS), Material Specification (MS), and Purchasing Specification (PS). The link to material qualification and qualified products is presented.

This document (Technical Specification) gives information about qualification rules and the relation between the different specification parts involved, such as Technical Specification (TS), Material Specification (MS), and Purchasing Specification (PS). The link to material qualification and qualified products is presented.

AMS 3970/4 specifies the batch release and delivery requirements for film adhesive used for repair. This specification is applicable when the film adhesive is part of the prepreg system as defined in AMS 3970 and AMS 3970/1.

AMS 3970/3 specifies the batch release and delivery requirements for carbon fiber fabric epoxy prepreg used for repair.

AMS 3970 gives information about qualification rules and the relation between the different specification parts involved, such as the Technical Specification (TS), Material Specification (MS), and Purchasing Specification (PS). The link to the material qualification and qualified products is presented.

This PS specifies the batch release and delivery requirements for epoxy resin systems (base resin and curing agent) used for wet lay-up repair purposes.

This PS specifies the batch release and delivery requirements for carbon fiber and carbon fabric used for wet lay-up repair purposes.