Refine Your Search

Topic

Search Results

Standard

Oil, Reference, for "L" Stock Rubber Testing

2019-06-13
WIP
AMS3020B
This specification covers a petroleum-base reference oil. This fluid has been typically used as a reference oil to estimate the ability of elastomeric compounds to conform to specified requirements after immersion at a specified temperature for a specified time and temperature as required by the material.
Standard

Rubber, Silicone 1200 Psi (8.27 Mpa), High Modulus 45-55

2019-05-10
WIP
AMS3347D
This specification covers a silicone rubber in the form of sheet, strip, tubing, extrusions and molded shapes. Primarily for parts required to operate or seal from -75 to +205 degrees C (-103 to +401 degrees F), compounded especially for high strength. Silicone elastomer is resistant to deterioration by weathering and by high-aniline-point-petroleum-base oils and remains flexible over the temperature range noted. These products are not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling.
Standard

Silicone Rubber, 1000 Psi (6.89 Mpa) Minimum Tensile Strength, 55-65 Durometer

2019-05-07
WIP
AMS3346H
This specification covers a silicone rubber material that can be used to manufacture product in the form of sheet, strip, tubing, molded shapes, and extrusions. This specification should not be used to address products such as O-rings, compression seals, O-ring cord, and molded-in-place gaskets.
Standard

Elastomer: Silicone, Rubber (MQ/VMQ) General Purpose 65 – 75 Durometer Type ‘A’ Hardness

2019-04-05
CURRENT
AMS3304J
This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, AMS7268 should be used.
Standard

Elastomer: Silicone Rubber, (VMQ) General Purpose 75 – 85 Durometer Type ‘A’ Hardness

2019-04-05
CURRENT
AMS3305K
This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material.
Standard

Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 75 - 85 Durometer Type “A” Hardness For Products in Fuel Systems/Lubricating Oils

2019-02-28
CURRENT
AMS3741
This specification covers a fluorosilicone (FVMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material.
X