Refine Your Search

Date

Date

Topic

Topic

Assembling Production control AMS CE Elastomers Committee

Search Results

Viewing 1 to 20 of 198
123Next >Last >>
Sort by published
Standard

Identification and Packaging Elastomeric Products
2024-03-04
CURRENT
AMS2810J
This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS2817 covers preferred requirements for identification and packaging of preformed packings.
Standard

Elastomer: Fluorosilicone Rubber (FVMQ), Fuel and Oil Resistant, High Strength, 45 – 55 Shore A Hardness, For Products in Fuel Systems / Lubricating Oils
2023-10-16
CURRENT
AMS3329D
This specification covers a high strength fluorosilicone (FVMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, molded O-ring cord, and molded in place gaskets for aeronautical and aerospace applications.
Standard

Elastomer: Fluorocarbon (FKM) Aircraft Engine Oil, Fuel and Hydraulic Fluid Resistant Low Temperature Sealing Tg -40 °F (-40 °C) / 70 to 80 Hardness, for Products in Aircraft Engine Oil, Fuel, and Hydraulics Systems
2023-03-20
CURRENT
AMS3353A
This specification covers a fluorocarbon elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. For molded rings, molded compression seals, and molded-in-place gaskets for aeronautical and aerospace applications, use the AMS7379 specification.
Standard

Elastomer: Chloroprene Rubber (CR) Weather Resistant 55 - 65
2022-06-13
CURRENT
AMS3241K
This specification covers a chloroprene (CR) rubber that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes such as window channels, bumper pads, chafing strips, etc. For molded rings, compression seals, molded O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the equivalent AMS7XXX specification.
Standard

Elastomer: Chloroprene Rubber (CR) Weather Resistant 35 - 45
2022-06-13
CURRENT
AMS3240L
This specification covers a chloroprene rubber (CR) that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes such as window channels, bumper pads, chafing strips, etc. For molded rings, compression seals, molded O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the equivalent AMS7XXX specification.
Standard

Rubber: Vinyl-Methyl Silicone (VMQ) Hot Air Resistant Low Compression Set, 70 to 80 Type A Hardness for Seals in Hot Air Systems
2021-05-19
CURRENT
AMS7267H
This specification covers a silicone (VMQ) rubber in the form of molded rings. These rings have been used typically as sealing rings for service from -65 to +260 °C (-85 to +500 °F) in contact with air, but usage is not limited to such applications. The cross-section of such rings is usually not over 0.275 inch (6.98 mm) in diameter or thickness.
Standard

Elastomer: Methyl Phenyl Vinyl Silicone Rubber (PVMQ) Extreme Low-Temperature Resistant 15 - 30 Type A Hardness
2021-03-10
CURRENT
AMS3332G
This specification covers an extreme low-temperature-resistant Methyl Phenyl Vinyl Silicone(PVMQ) elastomer that can be used to manufacture product in the form of sheet, strip, extrusions, and molded shapes. For molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the AMS7XXX specification.
Standard

Elastomer: Methyl/Methyl Vinyl Silicone (MQ/VMQ) High Temperature Resistant High Strength/Tear Resistant 45 to 55 Type ‘A’ Durometer Hardness
2020-05-26
CURRENT
AMS3347D
This specification covers a methyl or methyl vinyl silicone rubber material that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. For molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications, use the AMS7000 series specification.
Standard

Elastomer: Methyl Phenyl Vinyl Silicone (PVMQ) Very Low Temperature/Aircraft Piston Engine Oil Resistant High Strength/Tear Resistant 45 to 55 Durometer Type ‘A’ Hardness For Products in Aircraft Piston Engine Oil/Low Temperature Environments
2020-05-18
CURRENT
AMS3345G
This specification covers a methyl phenyl vinyl silicone rubber material that can be used to manufacture product in the form of sheet, strip, tubing, molded shapes, and extrusions. For molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the corresponding AMS7000 series specification.
Standard

Elastomer: Acrylonitrile Butadiene Rubber (NBR) Hot Oil and Coolant Resistant, Low Swell 45 to 55 Type ‘A’ Durometer Hardness for Products in Engine Oil Systems/Coolant Systems
2020-05-05
CURRENT
AMS3226J
This specification covers an Acrylonitrile Butadiene Rubber (NBR) that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. For molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the AMS7000 series specification.
Standard

Elastomer: Acrylonitrile Butadiene Rubber (NBR) Aromatic Fuel Resistant 55 to 65 Type ‘A’ Durometer Hardness For Products in: Aromatic and Aliphatic Fuel Systems
2020-04-28
CURRENT
AMS3212R
This specification covers an Acrylonitrile Butadiene Rubber (NBR) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. For molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the AMS7000 series specification.
123Next >Last >>
X