Refine Your Search

Topic

Search Results

Standard

Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65

2019-07-26
WIP
AMS3306D
This specification covers a silicone elastomer in the form of sheet, strip, tubing, extrusions, and molded shapes.<p>These products have been used typically as seals from -65 degrees to +225 degrees C (-85 degrees to +437 degrees F), compounded especially for high strength. Silicone rubber is resistant to deterioration by weathering and by high-aniline-point petroleum-base lubricating oil and phosphate ester hydraulic fluid, and remains flexible over the temperature range noted. This material is not normally suitable for use in contact with hydrocarbon-based fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer, but usage is not limited to such applications. Each application should be considered individually.
Standard

Oil, Reference, for "L" Stock Rubber Testing

2019-06-13
WIP
AMS3020B
This specification covers a petroleum-base reference oil. This fluid has been typically used as a reference oil to estimate the ability of elastomeric compounds to conform to specified requirements after immersion at a specified temperature for a specified time and temperature as required by the material.
Standard

Ethylene Propylene (EPM) Rubber, Phosphate Ester Resistant, 55-65

2019-05-07
WIP
AMS3248D
This specification covers an ethylene propylene (EPM) rubber in the form of sheet, strip, tubing, molded shapes, and extrusions. Primarily for parts, such as gaskets, grommets, and seals requiring resistance to phosphate esters and/or to ozone. Not suitable for use in contact with petroleum base fluids due to excessive swell.
Standard

Elastomer: Silicone, Rubber (MQ/VMQ) General Purpose 65 – 75 Durometer Type ‘A’ Hardness

2019-04-05
CURRENT
AMS3304J
This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, AMS7268 should be used.
Standard

Elastomer: Silicone Rubber, (VMQ) General Purpose 75 – 85 Durometer Type ‘A’ Hardness

2019-04-05
CURRENT
AMS3305K
This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material.
Standard

Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 75 - 85 Durometer Type “A” Hardness For Products in Fuel Systems/Lubricating Oils

2019-02-28
CURRENT
AMS3741
This specification covers a fluorosilicone (FVMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material.
X