Standard
Brass, Naval, Bars and Rods, 60.5Cu - 38.5Zn - 0.75Sn, Hard Temper (H04)
2023-10-16
CURRENT
AMS4612L
This specification covers a copper alloy (naval brass) in the form of bars and rods.
Search Results
Standard
Tolerances Copper and Copper Alloy Wire
2023-06-13
CURRENT
AMS2224H
This specification covers established inch/pound manufacturing tolerances applicable to copper and copper alloy wire ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted.
Standard
Aluminum Alloy, Welding Wire 5.0Si - 1.2Cu - 0.50Mg (C355.0)
2023-05-10
CURRENT
AMS4245G
This specification covers an aluminum alloy in the form of welding wire.
Standard
Tolerances Copper and Copper Alloy Sheet, Strip, and Plate
2023-05-10
CURRENT
AMS2222L
This specification covers established inch/pound manufacturing tolerances applicable to copper and copper alloy sheet, strip, and plate ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted.
Standard
Aluminum Alloy, Sheet, and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution and Precipitation Heat Treated (2219 -T81/-T851)
2023-05-10
CURRENT
AMS4599B
This specification covers an aluminum alloy in the form of sheet and plate from 0.020 to 6.000 inches (0.51 to 152.40 mm), inclusive, in thickness (see 8.5).
Standard
Tolerances Copper and Copper Alloy Bars and Rods
2023-01-17
CURRENT
AMS2221H
This specification covers established inch/pound manufacturing tolerances applicable to bars and rods of copper and copper alloys ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term “exclusive” is used to apply only to the higher figure of a specified range.
Standard
Aluminum Alloy, Sheet and Plate, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, Solution Heat Treated, Cold Worked (8%) and Precipitation Heat Treated (2219 -T87)
2022-11-02
CURRENT
AMS4613B
This specification covers an aluminum alloy in the form of sheet and plate from 0.020 to 5.000 inches (0.51 to 127.00 mm), inclusive, in nominal thickness (see 8.5).
Standard
Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (H04)
2022-10-13
CURRENT
AMS4602E
This specification covers one type of copper in the form of bars, rods, and shapes. Requirements are provided for bar and rods up to 3.000 inches (mm) in nominal diameter, squares and rectangles with up to 4.000 inches (mm) least distance between parallel sides and shapes of any size (see 8.6).
Standard
Copper Alloy, Wire 65Cu - 35Zn Annealed (O61)
2022-10-13
CURRENT
AMS4712H
This specification covers a copper-zinc alloy (brass) in the form of wire.
Standard
Brass Forgings, Free Cutting 60Cu - 2.0Pb - 37.5Zn As Forged (M10)
2022-09-30
CURRENT
AMS4614J
This specification covers one type of brass in the form of forgings and forging stock.
Standard
Aluminum Alloy, Sheet and Plate, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, Solution Heat Treated, Cold Worked and Naturally Aged (2219 -T31/-T351)
2022-09-13
WIP
AMS4601B
This specification covers an aluminum alloy in the form of sheet and plate.
Standard
Alloy Wire, Round 35Pd - 30Ag - 14Cu - 10Au - 10Pt - 0.85Zn Solution Heat Treated
2022-09-13
WIP
AMS7735F
This specification covers a palladium-silver alloy in the form of round wire 0.004 to 0.080 inch (0.10 to 2.03 mm) inclusive, in nominal diameter (see 8.5).
Standard
Gold Wire and Ribbon 99.97Au Annealed
2022-09-13
WIP
AMS7731E
This specification covers pure gold in the form of wire 0.005 to 0.040 inch (0.012 to 1.000 mm) inclusive, in nominal diameter, and ribbon 0.002 to 0.051 inch (0.05 to 1.28 mm) inclusive, in nominal thickness (see 8.5).
Standard
Copper, Sheet, Strip, and Plate Soft Annealed
2022-09-08
CURRENT
AMS4500K
This specification covers unalloyed copper in the form of sheet, strip, and plate, at least 0.015 inch (0.38 mm) in nominal thickness.
Standard
Zinc Alloy Castings, Die 4.0Al - 0.04Mg (AG40A) As Cast
2022-07-19
CURRENT
AMS4803F
This specification covers a zinc alloy in the form of die castings.
Standard
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated
2022-07-06
CURRENT
AMS4118M
This specification covers an aluminum alloy in the form of bars, rods, and wire 8.000 inches (203.20 mm) and under in nominal diameter and for squares, hexagons, octagons, and rectangles 50 in2 (322 cm2) and under in cross-sectional area and 8.000 inches (203.20 mm) and under in least distance between parallel sides (see 8.7).
Standard
Wire, Phosphor Bronze 94Cu - 5.0Sn - 0.19P Cold Drawn, Spring Temper (H08)
2022-06-20
CURRENT
AMS4720J
This specification covers one type of bronze in the form of round wire 0.500 inch (12.70 mm) and under in nominal diameter (see 8.5).
Standard
Aluminum Alloy Welding Wire 4.1Si - 0.20Mg (4643)
2022-04-14
CURRENT
AMS4189K
This specification covers an aluminum alloy in the form of welding wire.
Standard
Aluminum Alloy, Welding Wire 5.2Si (4043)
2021-12-01
CURRENT
AMS4190L
This specification covers an aluminum alloy in the form of welding wire (see 8.6).
Standard
Extrusions, Nickel-Aluminum Bronze, Martensitic 78.5Cu – 10.5Al – 5.1Ni – 4.8Fe Quenched and Tempered (TQ50)
2021-12-01
CURRENT
AMS4590D
This specification covers one type of nickel-aluminum bronze in the form of extruded bars, rods, and tubes.
