Search Results

Standard

Aluminum Alloy Extrusions, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511), Solution Heat Treated, Stress Relieved, and Overaged

2024-03-22

CURRENT

AMS4157F

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing 5.000 inches (127.00 mm) and under in nominal diameter or least thickness (wall thickness of tubing) (see 8.5).

Standard

Aluminum Alloy Tubing, Seamless, Drawn 1.8Cu - 1.0Mg - 0.8Si - 0.20Cr Solution Heat Treated, Stress-Relieved by Stretching, and Aged (2013-T6511)

2024-03-01

CURRENT

AMS4002B

This specification covers an aluminum alloy in the form of seamless, drawn tubing having nominal wall thickness of 0.120 to 0.400 inch (3.00 to 10.00 mm), inclusive (see 8.5).

Standard

Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and Precipitation Heat Treated

2023-12-13

CURRENT

AMS4149F

This specification covers an aluminum alloy in the form of die and hand forgings 6.000 inches (152.00 mm) and under in nominal thickness at time of heat treatment (see 8.6).

Standard

Tolerances Copper and Copper Alloy Seamless Tubing

2023-12-01

CURRENT

AMS2223J

This specification covers established inch/pound manufacturing tolerances applicable to copper and copper alloy seamless tubing ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term “exclusive” is used to apply only to the higher figure of a specified range.

Standard

Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50)

2023-11-10

CURRENT

AMS4640J

This specification covers an aluminum bronze alloy in the form of bars, rods, shapes, tubes, forgings, and forging stock (see 8.5).

Standard

Aluminum Alloy, Drawn, Round Seamless Tubing Close Tolerance 2.5Mg - 0.25Cr (5052-O) Annealed

2023-09-21

CURRENT

AMS4069G

This specification covers an aluminum alloy in the form of drawn, round seamless tubing 0.010 to 0.450 inch (0.25 to 11.43 mm), inclusive, in wall thickness (see 8.5).

Standard

Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged

2023-08-30

CURRENT

AMS4081K

This specification covers an aluminum alloy in the form of seamless, round tubing with wall thickness of 0.025 to 0.500 inch (0.64 to 12.70 mm) (see 8.6).

Standard

Aluminum Alloy, Drawn, Round, Seamless, Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Close Tolerance, Annealed

2023-08-01

CURRENT

AMS4079J

This specification covers an aluminum alloy in the form of drawn, round, seamless tubing with wall thickness of 0.018 to 0.500 inch (0.46 to 12.70 mm), inclusive (see 8.6).

Standard

Aluminum Alloy, Drawn Seamless Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed

2023-08-01

CURRENT

AMS4080R

This specification covers an aluminum alloy in the form of drawn seamless tubing in the annealed (O) condition. This specification covers products from 0.018 to 0.500 inch (0.46 to 12.70 mm) in wall thickness (see 8.6).

Standard

Aluminum Alloy, Drawn, Round Seamless Tubing 2.5Mg - 0.25Cr (5052-O) Annealed

2023-08-01

CURRENT

AMS4070P

This specification covers an aluminum alloy in the form of drawn, round seamless tubing with wall thicknesses of 0.010 to 0.450 inch (0.25 to 11.43 mm), inclusive (see 8.5).

Standard

Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat Treated

2023-05-17

CURRENT

AMS4111F

This specification covers an aluminum alloy in the form of die forgings or hand forgings up to 5 inches (125 mm) in thickness, and forging stock of any size (see 8.7).

Standard

Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 2.5Mg - 0.25Cr (5052-O) Annealed

2023-05-10

CURRENT

AMS4071P

This specification covers an aluminum alloy in the form of drawn, round seamless tubing having a wall thickness of 0.010 to 0.450 inch (0.25 to 11.43 mm), inclusive, and nominal outside diameters of 0.125 to 3.000 inch (3.18 to 76.2 mm), inclusive (see 8.5).

Standard

Phosphor Bronze Bars, Rods, and Tubing 95Cu - 5Sn Hard Temper

2023-02-14

CURRENT

AMS4625J

This specification covers one type of bronze in the form of bars and rods of any size, and tubing over 1.00 inch (25.4 mm) in nominal outer diameter (see 8.5).

Standard

Silver Alloy, Brazing Filler Metal 54Ag - 40Cu - 5.0Zn - 1.0Ni 1325 to 1575 °F (718 to 857 °C) Solidus-Liquidus Range

2023-01-17

CURRENT

AMS4772L

This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.

Standard

Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated, Cold Worked, and Naturally Aged

2022-11-22

CURRENT

AMS4086P

This specification covers an aluminum alloy in the form of drawn, round, seamless hydraulic tubing with nominal wall thickness of 0.018 to 0.500 inch (0.46 to 12.70 mm) (see 8.6).

Standard

Brass, Seamless, Tubing 85Cu - 15Zn Annealed (O61)

2022-11-02

CURRENT

AMS4553E

This specification covers a copper alloy (brass) in the form of seamless tubing with nominal OD of 0.405 inch (10.29 mm) to 10.75 inches (273.05 mm) and nominal weight of 0.253 lb/ft (0.38 kg/m) to 66.142 lb/ft (98.43 kg/m) (see 8.6).

Standard

Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (H04)

2022-10-13

CURRENT

AMS4602E

This specification covers one type of copper in the form of bars, rods, and shapes. Requirements are provided for bar and rods up to 3.000 inches (mm) in nominal diameter, squares and rectangles with up to 4.000 inches (mm) least distance between parallel sides and shapes of any size (see 8.6).

Standard

Brass Forgings, Free Cutting 60Cu - 2.0Pb - 37.5Zn As Forged (M10)

2022-09-30

CURRENT

AMS4614J

This specification covers one type of brass in the form of forgings and forging stock.

Standard

Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7149-T73) Solution and Precipitation Heat Treated

2022-09-14

CURRENT

AMS4320C

This specification covers an aluminum alloy in the form of die forgings, hand forgings, and forging stock.

Standard

Brass, Seamless Tubing 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58)

2022-09-08

CURRENT

AMS4558J

This specification covers a copper alloy (brass) in the form of seamless tubing.