Search Results

Standard

Aluminum Alloy, Drawn Seamless Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed

2023-08-01

CURRENT

AMS4080R

This specification covers an aluminum alloy in the form of drawn seamless tubing in the annealed (O) condition. This specification covers products from 0.018 to 0.500 inch (0.46 to 12.70 mm) in wall thickness (see 8.6).

Standard

Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 2.5Mg - 0.25Cr (5052-O) Annealed

2023-05-10

CURRENT

AMS4071P

This specification covers an aluminum alloy in the form of drawn, round seamless tubing having a wall thickness of 0.010 to 0.450 inch (0.25 to 11.43 mm), inclusive, and nominal outside diameters of 0.125 to 3.000 inch (3.18 to 76.2 mm), inclusive (see 8.5).

Standard

Silver Alloy, Brazing Filler Metal 54Ag - 40Cu - 5.0Zn - 1.0Ni 1325 to 1575 °F (718 to 857 °C) Solidus-Liquidus Range

2023-01-17

CURRENT

AMS4772L

This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.

Standard

Aluminum Alloy, Plate 7.9Zn - 1.2Cu - 2.1Mg - 0.10Zr (7097-T7651) Solution Heat Treated, Stress Relieved, and Overaged

2022-12-16

CURRENT

AMS4365A

This specification covers an aluminum alloy in the form of plate from 3.000 to 8.000 inches (76.20 to 203.20 mm) in thickness (see 8.5).

Standard

Aluminum, Foil and Light Gage Sheet 99.45Al (1145-0) Annealed

2022-08-05

CURRENT

AMS4011E

This specification covers aluminum in the form of foil and light gage sheet.

Standard

Aluminum Alloy, Plate, 7.9Zn – 1.8Cu - 2.0Mg - 0.10Zr (7099-T7451) Solution Heat Treated, Stress Relieved, and Overaged

2022-04-25

CURRENT

AMS4354A

This specification covers an aluminum alloy in the form of plate from 1.000 to 6.000 inches (25.40 to 152.40 mm) in thickness (see 8.6).

Standard

Aluminum Alloy, Plate, 7.9Zn - 1.8Cu - 2.0Mg - 0.10Zr (7099-T7651) Solution Heat Treated, Stress Relieved, and Overaged

2021-09-15

CURRENT

AMS4364A

This specification covers an aluminum alloy in the form of plate from 1.000 to 6.000 inches (25.40 to 152.40 mm) in thickness (see 8.6).

Standard

Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching

2021-06-28

CURRENT

AMS4128E

This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.7 mm) to 8.000 inches (203.2 mm) in nominal diameter or least difference between parallel sides and up to 50 square inches (322.6 square centimeters) in cross-sectional area (see 8.7).

Standard

Aluminum Alloy, 7075, Plate and Sheet (Improved Exfoliation Resistant)

2021-05-21

CURRENT

AMSQQA250/24C

This specification covers the specific requirements for aluminum alloy 7075 plate and sheet for applications requiring improved exfoliation resistance.

Standard

Aluminum Alloy, Rolled or Cold Finished, Bars, Rods, and Wire and Flash Welded Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6, -T651)

2020-08-25

CURRENT

AMS4117L

This specification covers an aluminum alloy in the form of rolled or cold-finished bars, rods, and wire, and of flash welded rings and stock for flash welded rings.

Standard

Brass Tubing, Seamless 66.5Cu - 33Zn - 0.45Pb Annealed

2019-08-06

CURRENT

AMS4554C

This specification covers one grade of brass in the form of seamless tubing.

Standard

Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Allow Castings, Determination and Acceptance of

2018-08-22

CURRENT

ARP1947C

This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50000 psi (345 MPa).

Standard

Heat Treatment of Magnesium Alloy Castings

2018-05-03

CURRENT

AMS2768C

This specification covers the engineering requirements for heat treatment of magnesium alloy castings and for parts machined from castings.

Standard

Copper-Beryllium Alloy Castings 97Cu - 2.1Be - 0.52Co - 0.28Si Solution Heat Treated (TB00)

2018-01-02

CURRENT

AMS4890D

This specification covers a copper-beryllium alloy in the form of sand, investment, or centrifugal castings.

Standard

Aluminum Alloy, Plate, 7.9Zn – 1.2Cu - 2.1Mg - 0.10Zr (7097-T7651) Solution Heat Treated, Stress Relieved, and Overaged

2017-06-29

HISTORICAL

AMS4365

This specification covers an aluminum alloy in the form of plate from 3.000 to 8.000 inches (76.20 to 203.20 mm) in thickness (see 8.4).

Standard

Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 2.5Mg – 0.25Cr (5052-O) Annealed

2017-02-14

HISTORICAL

AMS4071N

This specification covers an aluminum alloy in the form of drawn, round seamless tubing having a wall thickness of 0.010 to 0.450 inch (0.25 to 11.43 mm) inclusive, and nominal outside diameters of 0.125 to 3.000 inch (3.18 to 76.2 mm), inclusive (see 8.5).

Standard

Aluminum Alloy, Plate, 7.9Zn – 1.8Cu - 2.0Mg - 0.10Zr (7099-T7451) Solution Heat Treated, Stress Relieved, and Overaged

2016-01-12

HISTORICAL

AMS4354

This specification covers an aluminum alloy in the form of plate from 1.000 to 6.000 inches (25.40 to 152.40 mm) in thickness (see 8.4).

Standard

Aluminum Alloy, Plate, 7.9Zn – 1.8Cu - 2.0Mg - 0.10Zr (7099-T7651) Solution Heat Treated, Stress Relieved, and Overaged

2016-01-12

HISTORICAL

AMS4364

This specification covers an aluminum alloy in the form of plate from 1.000 to 6.000 inches (25.40 to 152.40 mm) in thickness (see 8.4).

Standard

Aluminum Alloy, Foil 2.5Mg - 0.25Cr (5052-H191) Strain Hardened

2015-12-03

CURRENT

AMS4004E

This specification covers an aluminum alloy in the form of foil.

Standard

Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated, Cold Worked, and Naturally Aged

2015-05-08

HISTORICAL

AMS4086N

This specification covers an aluminum alloy in the form of drawn, round, seamless hydraulic tubing.