Search Results

Standard

Sealing Compound Aircraft Firewall, Silicone

2023-05-22

CURRENT

AMS3374G

This specification covers six types of silicone sealing compounds as either one-part or two-part systems that cure at room temperature.

Standard

Sealing Compound, Polythioether Elastomeric Two-Part Electrically Conductive

2022-11-02

CURRENT

AMS3266B

This specification covers two types of electrically conductive, elastomeric polythioether sealing compounds that cure at room temperature. The sealing compound is supplied as either a two-component system or as premixed and frozen.

Standard

Sealing Compound, Flame Resistant, Non-Silicone

2022-04-13

CURRENT

AMS3381C

This specification covers non-silicone synthetic rubber sealing compounds supplied as a two-component system that cures at room temperature.

Standard

Release Agent, for Use During Form-in-Place Gasket Preparation

2021-12-15

CURRENT

AMS3092B

This specification establishes requirements for solvent-based and water-based release agents, in bulk or aerosol form.

Standard

Insulating Compound, Electrical, Embedding, Reversion Resistant Silicone

2021-03-05

CURRENT

AS81550B

This specification covers the requirements for two types of a two-part, transparent, reversion resistant flexible insulating compound, to provide resilient, environmental, and electrical insulation of components in systems in temperature range -85 to 392 °F (-65 to 200 °C). These insulating compounds are intended for embedding, potting or encapsulation of electrical and electronic components in systems where tear resistance is not critical, but their use is not limited to such applications. These transparent compounds allow visual circuit and part identification and facilitate part replacement and repairs. The insulating compound shall cure in sections of unlimited thickness, either exposed to air or completely sealed.

Standard

Sealing Compound, Flame Resistant, Non-Silicone

2020-10-14

HISTORICAL

AMS3381B

This specification covers non-silicone synthetic rubber sealing compounds supplied as a two-component system that cures at room temperature.

Standard

Standard Contaminant for Testing Aerospace Cleaners

2020-07-14

CURRENT

AMS7201

This specification establishes requirements for a standard contaminant that can be used to represent typical soils encountered in aerospace cleaning. This standard contaminant consists of materials that are common contaminants found in aircraft maintenance depots and manufacturing facilities.

Standard

Sealing Compound Aircraft Firewall, Silicone

2019-05-31

HISTORICAL

AMS3374F

This specification covers six types of silicone sealing compounds curing to elastomeric materials.

Standard

Sealing Compound, Aircraft Firewall, Non-Silicone

2019-02-08

HISTORICAL

AMS3381A

This specification covers non-silicone synthetic rubber sealing compounds curing to elastomeric materials.

Standard

Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)

2019-02-08

CURRENT

AMS3277K

This specification covers polythioether rubber fuel resistant sealing compounds supplied as a two-component system which cures at room temperature.

Standard

Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens

2018-11-14

CURRENT

AS5127C

This standard describes the accepted methods used for preparing aerospace sealant test specimens for qualification and quality conformance or acceptance testing. AS5127/1 and AS5127/2 are to be used in conjunction with this document and the applicable AMS specifications.

Standard

Sealing Compound Aircraft Firewall, Silicone

2018-10-15

HISTORICAL

AMS3374E

This specification covers six types of silicone sealing compounds curing to elastomeric materials.

Standard

Sealing Compound, Polysulfide Rubber Preformed Strips for Sealing Removable Doors, Skins, and Panels

2018-07-23

HISTORICAL

AMS3379

This specification establishes the requirements for a polysulfide sealing compound in putty consistency to be used for form-in-place sealing of removable doors, skins, and panels.

Standard

Sealing Tape, Sheet, or Gasket, Polytetrafluoroethylene, Expanded (EPTFE) Oil and Water Resistant

2017-07-17

CURRENT

AMS3255B

This specification establishes the requirements for an expanded polytetrafluoroethylene (EPTFE) in the form of sealing tape, gaskets, or sheets requiring no mixing or curing.

Standard

Sealing Compound, Polythioether Elastomeric Two-Part Electrically Conductive

2017-02-23

HISTORICAL

AMS3266A

This specification covers two types of electrically conductive, elastomeric polythioether sealing compounds that cure at room temperature. The sealing compound is supplied as either a two-component system or as premixed and frozen.

Standard

Release Agent, for Use During Form-In-Place Gasket Preparation

2015-12-02

HISTORICAL

AMS3092A

This specification establishes requirements for solvent-based and water-based release agents, in bulk or aerosol form.

Standard

Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)

2015-12-02

HISTORICAL

AMS3277J

This specification covers polythioether rubber fuel resistant sealing compounds supplied as a two-component system which cures at room temperature.

Standard

Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)

2014-12-17

HISTORICAL

AMS3277H

This specification covers polythioether rubber fuel resistant sealing compounds supplied as a two-component system which cures at room temperature.

Standard

Sealing Compound, Aircraft Firewall, Non-Silicone

2014-05-08

HISTORICAL

AMS3381

This specification covers non-silicone synthetic rubber sealing compounds curing to elastomeric materials.

Standard

Insulating Compound, Electrical, Embedding, Reversion Resistant Silicone

2014-05-06

HISTORICAL

AS81550A

This specification covers the requirements for two types of a two-part, transparent, reversion resistant flexible insulating compound, to provide resilient, environmental, and electrical insulation of components in systems in temperature range −85 to 392 °F (−65 to 200 °C). These insulating compounds are intended for embedding, potting or encapsulation of electrical and electronic components in systems where tear resistance is not critical but their use is not limited to such applications. These transparent compounds allow visual circuit and part identification and facilitates part replacement and repairs. The insulating compound shall cure in sections of unlimited thickness, either exposed to air or completely sealed.