Refine Your Search

Search Results

Standard

Agricultural Tractor Tire Loadings, Torque Factors, and Inflation Pressures

2009-08-17
CURRENT
J709_200908
This SAE Standard establishes loadings, tangential pull values, and inflation pressure relationships for tire sizes and ply ratings currently used on agricultural tractors. Primary purpose of this recommendation is for use with SAE J708 May59. The performance of the tractor is materially affected by tire loadings, tire tangential pull values, and inflation pressure; therefore, it becomes desirable to publish this information.
Standard

Tire Selection Tables for Agricultural Tractors of Future Design

2009-08-17
CURRENT
J711_200908
This SAE Recommended Practice is established for the purpose of providing selection tables of tires preferred for the application to machines of future design. The objective of the tables is to minimize the number of tire sizes.
Standard

Liquid Ballast Table for Drive Tires of Agricultural Tractors

2009-08-17
CURRENT
J884_200908
This SAE Recommended Practice is established for the purpose of providing average weight values for water or calcium chloride liquid filling solutions in SAE recommended drive tire sizes. It is recommended that tires be filled to valve stem level while the valve is located in the highest position.
Standard

Headlamps for Agricultural Equipment

2009-05-04
CURRENT
J975_200905
This SAE Standard provides performance and general design requirements and related test procedures for headlamps for use on agricultural equipment that may be operated on public roads.
Standard

Terminology for Agricultural Equipment

2003-05-20
CURRENT
J1150_200305
This SAE Standard specifies terminology for agricultural equipment designed primarily for use in agricultural operations fo rthe production of food and fiber.
Standard

Application of Hydraulic Remote Control to Agricultural Tractorsand Trailing Type Agricultural Implements

2003-05-15
CURRENT
J716_200305
This SAE Standard gives the specifications and dimensions for the assembly and clearances common to hydraulically-operated cylinders and to trailing-type farm implements. The specifications given permit the interchangeability of hydraulic operation between tractors equipped with a cylinder and trailing-type implements designed for this purpose, the tractor possessing enough power at its drawbar to operate the implement; and the transference of the hydraulic cylinder from one implement to another. This document applies to three categories of agricultural tractors, as follows in Table 1: This standard is the English translation of ISO 2057 dated 1981-11-15, except where indicated by a double asterisk (which indicates a change, an addition, or deletion) and the addition of SAE reference documents where applicable.
Standard

Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors

2002-08-29
HISTORICAL
J2194_200208
Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3463 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met. Fulfillment of the intended purpose requires testing as follows: A temperature-material requirement (6.9). This can be satisfied by using the appropriate materials or by performing any of the structural performance tests (Sections 7, 8, or 9) at -18 °C. A laboratory test, under repeatable and controlled loading, to permit analysis of the ROPS for compliance with the performance requirements of this document. Either the static test sequence (Section 7) or the impact test sequence (Section 8 ) shall be conducted. See Figure 1. A seat belt anchorage test (Section 10). The test procedures and performance requirements outlined in this document are based on currently available engineering data.
Standard

Overhead Protection for Agricultural Tractors--Test Procedures and Performance Requirements

2002-08-22
HISTORICAL
J167_200208
This SAE Standard applies to an overhead cover installed on a protective frame or enclosure conforming to SAE J2194 or alternately SAE J1194 and the following additional requirement of a drop test to verify the effectiveness of the overhead cover in protecting the operator from falling objects. The test procedures and performance requirements outlined in this document are based on currently available engineering data. This document establishes test and performance requirements for overhead protection to minimize the frequency and severity of operator injury due to falling objects encountered in normal operation of a wheeled agricultural tractor.
Standard

Slow-Moving Vehicle Identification Emblem

2000-06-28
CURRENT
J943_200006
This SAE Standard establishes emblem dimensional specifications, performance requirements, related test procedures, and mounting requirements. This unique idenification emblem shall be used only on machines which are designed for and travel at rates of speed less than 40 km/h (25 mph). The identifcation emblem shall supplement but not replace warning devices such as tail lamp regulators or flashing lights and shall not be used to identify stationary objects or stopped vehicles and/or machines. The dimensions and color patterns of the emblem have been established as a unique identification and shall not be altered to permit advertising or other markings on the face of the emblem, except as permitted in 4.2
Standard

Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors

1999-11-22
HISTORICAL
J1194_199911
Fulfillment of the intended purpose requires testing as follows: A laboratory test, under repeatable and controlled loading, to permit analysis of the ROPS for compliance with the performance requirements of this SAE Standard. Either the static test (6.1) or the dynamic test (6.2) shall be conducted. A crush test to verify the effectiveness of the deformed ROPS in supporting the tractor in an upset attitude. A field upset test under reasonably controlled conditions, both to the rear and side, to verify the effectiveness of the protective system under actual dynamic conditions. (See 6.4.1.1 for requirements for the omission of this test). In addition to the laboratory and field loading requirements, there is a temperature-material requirement. (See 7.1.2.) The test procedures and performance requirements outlined in this document are based on currently available engineering data.
Standard

Roll-Over Protective Structures (Rops) for Wheeled Agricultural Tractors

1997-09-01
HISTORICAL
J2194_199709
Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3468 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met. Fulfillment of the intended purpose requires testing as follows: A temperature-material requirmenet. This can be satisfied by using the appropriate materials or by performing any of the structural performance tests at -18 degrees C. A laboratory test, under repeatable and controlled loading, to permit anaysis of the ROPS for compliance with the performance requirements of this document. Either the static test sequence or the impact test sequence shall be conducted. A set belt anchorage test. The test procedures and performance requirements outlined in this document are based on currently available engineering data.
Standard

Terminology for Agricultural Equipment

1997-07-01
HISTORICAL
J1150_199707
This SAE Standard specifies terminology for agricultural equipment designed primarily for use in agricultural operations for production of food and fiber. This terminology is intended to establish uniformity for terms used for agricultural equipment in standards, technical papers, specifications, and general usage.
Standard

Safety for Agricultural Tractors

1996-08-01
CURRENT
J208_199608
This standard is a guide to provide a reasonable degree of personal safety for operators and other persons during the normal operation and servicing of agricultural tractors.
Standard

Front-Mounted Linkage for Agricultural Wheeled Tractors

1996-07-01
CURRENT
J2131_199607
This SAE Standard describes the requirements of the linkage to attach implements or equipment to the front of agricultural wheeled tractors. This shall be a three-point linkage in association with a power lift. It applies to the categories defined in ISO 730/1.
Standard

Three-Point Hitch, Implement Quick-Attaching Coupler, Agricultural Tractors

1996-07-01
CURRENT
J909_199607
This SAE Standard sets forth the requirements for the attachment of three-point hitch implements or equipment to the rear of agricultural wheeled tractors equipped with quick-attaching couplers. It is intended to establish those dimensions which are necessary to assure adequate clearance between components and to assure proper functioning of the tractor-implement combination when the implement is attached to the tractor by means of quick-attaching coupler. Design of the latching mechanism and individual components of the coupler not restricted by this document are left to the discretion of the manufacturer.
X