Refine Your Search

Search Results

Viewing 1 to 18 of 18
Standard

Agricultural Tractor Tire Loadings, Torque Factors, and Inflation Pressures

2009-08-17
CURRENT
J709_200908
This SAE Standard establishes loadings, tangential pull values, and inflation pressure relationships for tire sizes and ply ratings currently used on agricultural tractors. Primary purpose of this recommendation is for use with SAE J708 May59. The performance of the tractor is materially affected by tire loadings, tire tangential pull values, and inflation pressure; therefore, it becomes desirable to publish this information.
Standard

Liquid Ballast Table for Drive Tires of Agricultural Tractors

2009-08-17
CURRENT
J884_200908
This SAE Recommended Practice is established for the purpose of providing average weight values for water or calcium chloride liquid filling solutions in SAE recommended drive tire sizes. It is recommended that tires be filled to valve stem level while the valve is located in the highest position.
Standard

Tire Selection Tables for Agricultural Tractors of Future Design

2009-08-17
CURRENT
J711_200908
This SAE Recommended Practice is established for the purpose of providing selection tables of tires preferred for the application to machines of future design. The objective of the tables is to minimize the number of tire sizes.
Standard

Front-Mounted Linkage for Agricultural Wheeled Tractors

1996-07-01
CURRENT
J2131_199607
This SAE Standard describes the requirements of the linkage to attach implements or equipment to the front of agricultural wheeled tractors. This shall be a three-point linkage in association with a power lift. It applies to the categories defined in ISO 730/1.
Standard

Braking System Test Procedures and Braking Performance Criteria for Agricultural Tractors

1992-09-01
CURRENT
J1041_199209
The test procedures and performance criteria are directed to operation and parking of agricultural tractors equipped with braking system(s) and having a maximum design speed exceeding 6 km/h. Combinations of agricultural towing machines equipped with braking systems and towed agricultural machines without braking systems are included in this SAE Standard.
Standard

Braking System Test Procedures and Braking Performance Criteria for Agricultural Tractors

1991-10-01
HISTORICAL
J1041_199110
The test procedures and performance criteria are directed to operation and parking of agricultural tractors equipped with braking system(s) and having a maximum design speed exceeding 6 km/h. Combinations of agricultural towing machines equipped with braking systems and towed agricultural machines without braking systems are included in this SAE Standard.
Standard

Liquid Ballast Table for Drive Tires of Agricultural Tractors

1991-03-01
HISTORICAL
J884_199103
This SAE Recommended Practice is established for the purpose of providing average weight values for water or calcium chloride liquid filling solutions in SAE recommended drive tire sizes. It is recommended that tires be filled to valve stem level while the valve is located in the highest position.
Standard

Tire Selection Tables for Agricultural Tractors of Future Design

1991-03-01
HISTORICAL
J711_199103
This SAE Recommended Practice is established for the purpose of providing selection tables of tires preferred for the application to machines of future design. The objective of the tables is to minimize the number of tire sizes.
Standard

T-Hook Slots for Securement in Shipment of Agricultural Equipment

1988-06-01
HISTORICAL
J39_198806
This SAE Standard is to provide a means of securement in shipment of agricultural equipment on railroad flat cars and flatbed trucks by utilizing a T-hook and slot method. This SAE Standard is to provide standardized restraining slots, in accordance with product weight category and test requirements, to be incorporated in agricultural equipment that will be shipped, utilizing a T-hook and slot method of tiedown.
Standard

Industrial and Agricultural Disc Wheels

1986-06-01
HISTORICAL
J712_198606
The purpose of this SAE Recommended Practice is to provide a selection of disc wheels for industrial and agricultural application with a maximum of interchangeability. This is accomplished by establishing five groups of disc wheels, in each of which the hub mounting elements are common. These groups are designated 4 bolt, 5 in bolt circle; 5 bolt, 4.5 in bolt circle; 5 bolt, 5.5 in bolt circle; 6 bolt, 6 in bolt circle; and 8 bolt, 8 in bolt circle. Further, this document establishes an SAE part number and the maximum rated radial load for each standard wheel. In addition, the document requires the wheel manufacturer's name or trademark to be impression stamped on the wheel with location at the discretion of the manufacturer.
Standard

T-Hook Slots for Securement in Shipment of Agricultural Equipment

1983-06-01
HISTORICAL
J39_198306
This SAE Standard is to provide a means of securement in shipment of agricultural equipment on railroad flat cars and flatbed trucks by utilizing a T-hook and slot method. This SAE Standard is to provide standardized restraining slots, in accordance with product weight category and test requirements, to be incorporated in agricultural equipment that will be shipped, utilizing a T-hook and slot method of tiedown.
Standard

Braking System Test Procedures and Braking Performance Criteria for Agricultural Tractors

1983-03-01
HISTORICAL
J1041_198303
The test procedures and performance criteria are directed to operation and parking of agricultural tractors equipped with braking system(s) and having a maximum design speed exceeding 6 km/h. Combinations of agricultural towing machines equipped with braking systems and towed agricultural machines without braking systems are included in this SAE Standard.
Standard

Industrial and Agricultural Disc Wheels

1977-09-01
HISTORICAL
J712A_197709
The purpose of this SAE Recommended Practice is to provide a selection of disc wheels for industrial and agricultural application with a maximum of interchangeability. This is accomplished by establishing five groups of disc wheels, in each of which the hub mounting elements are common. These groups are designated 4 bolt, 5 in bolt circle; 5 bolt, 4.5 in bolt circle; 5 bolt, 5.5 in bolt circle; 6 bolt, 6 in bolt circle; and 8 bolt, 8 in bolt circle. Further, this document establishes an SAE part number and the maximum rated radial load for each standard wheel. In addition, the document requires the wheel manufacturer's name or trademark to be impression stamped on the wheel with location at the discretion of the manufacturer.
Standard

Agricultural Tractor Tire Loadings, Torque Factors, and Inflation Pressures

1977-05-01
HISTORICAL
J709_197705
This SAE Standard establishes loadings, tangential pull values, and inflation pressure relationships for tire sizes and ply ratings currently used on agricultural tractors. Primary purpose of this recommendation is for use with SAE J708 May59. The performance of the tractor is materially affected by tire loadings, tire tangential pull values, and inflation pressure; therefore, it becomes desirable to publish this information.
Standard

Industrial and Agricultural Disc Wheels

1975-09-01
HISTORICAL
J712A_197509
The purpose of this SAE Recommended Practice is to provide a selection of disc wheels for industrial and agricultural application with a maximum of interchangeability. This is accomplished by establishing five groups of disc wheels, in each of which the hub mounting elements are common. These groups are designated 4 bolt, 5 in bolt circle; 5 bolt, 4.5 in bolt circle; 5 bolt, 5.5 in bolt circle; 6 bolt, 6 in bolt circle; and 8 bolt, 8 in bolt circle. Further, this document establishes an SAE part number and the maximum rated radial load for each standard wheel. In addition, the document requires the wheel manufacturer's name or trademark to be impression stamped on the wheel with location at the discretion of the manufacturer.
Standard

Agricultural Tractor Tire Loadings, Torque Factors, and Inflation Pressures

1975-05-01
HISTORICAL
J709C_197505
This SAE Standard establishes loadings, tangential pull values, and inflation pressure relationships for tire sizes and ply ratings currently used on agricultural tractors. Primary purpose of this recommendation is for use with SAE J708 May59. The performance of the tractor is materially affected by tire loadings, tire tangential pull values, and inflation pressure; therefore, it becomes desirable to publish this information.
Standard

Tire Selection Tables for Agricultural Tractors of Future Design

1975-05-01
HISTORICAL
J711C_197505
This SAE Recommended Practice is established for the purpose of providing selection tables of tires preferred for the application to machines of future design. The objective of the tables is to minimize the number of tire sizes.
X