Search Results

Significantly, more fatalities and serious injuries occur due to ejection in roll over accidents. The present study was conducted to determine the occupant retention and head-neck injury potential aspects of laminated glass in roll over accidents. The head injury and neck parameters were obtained from Hybrid III 50% male dummy test device impacting on various types of side windows with laminated glass. Results indicated that the glass contained the dummy assembly and the head neck biomechanical parameters were below the critical value injury tolerance limits in simulated rollover accidents.

Phase I, Phase II, Caterpillar, Allis-Chalmers, Clark, Hyster, Toyota, and Entwistle fork lift upset studies have been conducted with Hybrid II dummies, Side Impact Dummies, and stunt men. The investigations concluded that the dummy lacks the ability to brace itself, hold on, and does not have adequate biofidelity to represent the human in a fork lift upset. Crushing injuries and death typically occur when the operator is thrown or jumps from the overturning forklift and is pinned by the overhead guard or canopy. The dummy studies demonstrated a wide range of Head Injury Criteria (HIC) values that were not reproducible. Furthermore, other injury producing variables such as angular acceleration, angular velocity or induced brain stress were not investigated. The injury level of 1000 for the HIC for the mid-sized male, small female, and 6 year-old has been recommended by the National Highway Transportation Safety Administration (NHTSA).

Determination of human tolerance to injury is difficult because of the physical differences between humans and animals, dummies and cadaver tissue. Certain human volunteer testing has been done but at subinjurious levels [STAP 86] [EWIN 72] Considerable biomechanical engineering injury studies exist for the adult human cadaver however little is available for the pediatric population [SANC 99] [KLEI 98b]. Studies have been made of pediatric skull bone modulus, fetal tendon and early pediatric studies of the newborn during delivery, however, a paucity of information still exists in these areas. A number of dummies have recently been made available principally for airbag testing to bridge the gap between the 50 percentile Hybrid III male dummy and the 95 percentile male dummy.

The Federal Motor Vehicle Safety Standard 571.201 discusses occupant protection with interior impacts of vehicles. Recent rule making by the National Highway Traffic Safety Administration (NHTSA) has identified padding for potential injury reduction in vehicles. Head injury mitigation with padding on vehicular roll bars was evaluated. After market 2 to 2.5 cm thick padding and metal air gap padding reduced the head injury criterion (HIC) and angular acceleration compared to the stock foam roll bar padding. Studies were conducted with free falling Hybrid 50% male head form drops on the fore head and side of the head. Compared to the stock roll bar material, a nearly 90% reduction in HIC was observed at speeds up to 5.4 m/s. A concomitant 83% reduction in angular acceleration was also observed with the metal air gap padding. A 2 to 2.5 cm thick Simpson roll bar padding produced a 70 to 75% reduction in HIC and a 59 to 73% reduction in angular acceleration.

The purpose of this study was to investigate the use of the chestband in side impact conditions by conducting validation experiments, and evaluating its feasibility by conducting a series of human cadaver tests under side impact crash scenarios. The chestband validation tests were conducted by wrapping the device around the thorax section of the Side Impact Dummy at its uppermost portion. The anthropomorphic test device was seated on a Teflon pad on a platform to accept impact from the side via a pendulum system. Tests were conducted at 4.5, 5.7, and 6.7 m/sec velocities using round and flat impactors. Retroreflective targets were placed at each strain gauge channel on the edge of the chestband. The test was documented using a high-speed digital video camera operating at 4500 frames/sec. Deformation contours and histories were obtained using the chestband electronic signals in combination with the RBAND-PC software.

Sixty-three simulated frontal impacts using cadaveric specimens were performed to examine and quantify the performance of various contemporary automotive restraint systems. Test specimens were instrumented with accelerometers and chest bands to characterize their mechanical responses during the impact. The resulting thoracic injury severity was determined using detailed autopsy and was classified using the Abbreviated Injury Scale. The ability of various mechanical parameters and combinations of parameters to assess the observed injury severities was examined and resulted in the observation that belt restraint systems generally had higher injury rates than air bag restraint systems for the same level of mechanical responses. To provide better injury evaluations from observed mechanical parameters without prior knowledge of what restraint system was being used, a dichotomous process was developed.

Head injury is a serious threat to lives of people working around farm machinery. The consequence of head injuries are costly, paralytic, and often fatal. Clinical and biomechanical data on head injuries are reviewed and their application in the analysis of head injury risk associated with farm tractor discussed. A significant proportion of tractor-related injuries and deaths to adults, as well as children, is due directly or indirectly to head injury. An improved injury reporting program and biomechanical studies of human response to tractor rollover, runover, and falls, are needed to understand mechanisms of the associated head injury.

In the present investigation a tractor wheel runover accident was simulated to obtain biomechanical information relating to mechanism of injury. Twelve cadaver porcine specimens were runover with the right front wheel of a tractor. Specimens were placed on a six-axis force plate and thorax contours were recorded temporally. Results indicated up to 68% compression of the chest occurred during the runover event. The shear force in the direction of travel was a significant factor in the type of fractures that occurred to the rib cage. Pathology determined from x-ray revealed multiple fractures per rib in the area directly below the path of the tire. Autopsy evaluation revealed soft tissue contusion on the left side in the area of wheel path. There was often extra blood in the pericardial space and examination of the brain showed petechial hemorrhaging subdurally.

One of the leading causes of death and disability among young children is motor vehicle accidents. Although current child restraint systems (car seats) have significantly reduced mortality and morbidity, deaths and injuries still occur. Since it is not possible to correlate human child injury potential with the biomechanical devices used for high level impact testing using experimental methods, the acquisition and analysis of specific child injury data identifiable with real world automobile crashes is critical for input to biomechanical research, anthropometric test device (ATD) development and safety standard revisions. The purpose of this study was to analyze vehicular-related trauma that had occurred to children in known crash environments based on accident configuration and car seat design.

The automotive safety community has grown increasingly aware of the societal costs of injury impairment and disability resulting from automobile accidents. A significant portion of this impairment can be attributed to lower extremity trauma. An accident data study was conducted to determine lower extremity injury frequencies and mechanisms for restrained front-seat occupants in frontal collisions. A query of the 1988-1990 NASS (National Accident Sampling System) data provided information on pelvis, femur, knee, leg, and ankle and foot injuries. Age, gender, seating position, and delta-V were examined for their effect on the data. Lower extremity injury data were compared with injury data of similar severity (AIS ≥ 2) for the head, chest, thorax, and abdomen. The NASS data was supplemented with injury impairment information which, combined with anthropomorphic and biomechanical data, provides a prioritization scheme for the design of dummy lower extremities and instrumentation.

The patho-anatomic alterations due to vertical loading of the human cervical column were documented and correlated with biomechanical kinematic data. Seven fresh human cadaveric head-neck complexes were prepared, and six-axis load cells were placed at the proximal and distal ends of the specimens to document the gross biomechanical response. Retroreflective markers were placed on bony landmarks of vertebral bodies, articular facets, and spinous processes along the entire cervical column. Targets were also placed on the occiput and arch of C1. The localized movements of these markers were recorded using a video analyzer during the entire loading cycle. Pre-test two-dimensional, and three-dimensional computerized tomography (CT), and plane radiographs were taken. The specimens were loaded to failure using an electrohydraulic testing device at a rate of 2 mm/s.

Engineering efforts directed at better occupant safety require a thorough understanding of available epidemiologic data. Epidemiologic studies using clinical as well as accident information facilitates the prioritization of biomechanics research so that controlled laboratory experimentation and/or analytical models can be advanced. This information has also value in dictating levels and types of injury that are critical to the development of anthropomorphic test devices used in crash environments. In this paper, motor vehicle accident related (excluding pedestrians, bicyclists, and motorcyclists) epidemiologic data were obtained from clinical and computerized accident (National Accident Sampling System-NASS) files. Clinical data were gathered from patients admitted to the Medical College of Wisconsin Affiliated Hospitals, and fatalities occurring in Milwaukee County, State of Wisconsin. NASS database with specific focus on spinal injuries of motor vehicle occupants was also used.

Studies were conducted on twenty-two fresh human cadavers to determine the probability of facial bone fracture following dynamic contact with steering wheel assemblies of both standard (a commercially available) and energy absorbing (EA) types. Using a specially designed and validated vertical-drop impact test system, either zygoma was impacted once onto the junction of the lower left spoke and rim with velocities ranging from 2.0 to 6.9 m/s. Generalized force histories were recorded with a six-axis load cell placed below the hub. The wheel was inclined 30 degrees to the horizontal. Steering wheel deformations were recorded with a system of potentiometers placed below the impact site on the wheel. Dynamic forces at the zygoma (impact site) were computed using transformation principles. A triaxial accelerometer was placed at the posterior parietal region of the specimen opposite to the impact site to record acceleration histories. High speed photography documented the kinematics.

Lower limb injuries among motor vehicle occupants are relatively common and are one of the principle causes of permanent disability. The author has reviewed the current literature and his own experience as an orthopaedic surgeon and research accident investigator concerning lower limb injuries among motor vehicle occupants. An unreported series of knee, thigh, hip, pelvis injuries with indepth accident investigation is reported. Incidence rates for specific injury diagnoses are not available. Gross tabulations reveal that lower limb injury is second only to head injury in frequency among injured motor vehicle occupants. Lower limb injuries are possibly the commonest cause of permanent disability and impairment resulting from motor vehicle accidents.

The FMVSS were established to provide the public with uniform safety equipment and design standards based on sound research. Ongoing evaluation is essential to maintain the effectiveness and safety of FMVSS and to ensure that current technology is incorporated in standards development. Serious injury (AIS 3 or greater) reporting by NASS should be upgraded to facilitate standards evaluation and development. Although cost effectiveness is a mandated criteria for standards evaluation, the protection of human life and limb must remain the principle criteria for measuring effectiveness. A citizen's advisory panel, similar to the NMVSAC should be established to assist NHTSA in establishing priorities for standards evaluation, development and promulgation.

In a crash, impact against the steering assembly can be a major cause of serious and fatal injury to drivers. But the interrelationship between injury protection and factors of surface area, configuration, padding, relative position of the spokes, and number and stiffness of spokes and rim is not clear. This paper reports a series of high-G sled tests conducted with anesthetized animal subjects in 30 mph impacts at 30 G peaks. A total of eight tests were conducted, five utilizing pig subjects, one a female chimpanzee, one an anthropomorphic dummy, and one test with no subject. Instrumentation included closed circuit TV, a tri-axial load cell mounted between the steering wheel and column, seat belt load measurement, six Photo-Sonics 1000 fps motion picture cameras, and poloroid photography. Medical monitoring pre, during and post-impact was followed by gross and microscopic tissue examination.

Because of its flexibility and structure, the cervical spine is disposed to various mechanisms of injury: although not so common as injuries caused by head impacts, cervical fractures and/or fracture-dislocations have been reported without direct impact to the head. Some cervical injuries reported have been sustained by wearers of lap and shoulder belts in auto accidents; however, we do not consider belt use a potential hazard because ample evidence has accrued in the medical and engineering literature to document general injury and fatality reduction by use of seatbelts. We believe that in many instances occupants would be more seriously injured or killed were belts not worn. The present paper reviews reports of cervical injuries without head impact found in the literature and case histories of such injuries from the Highway Safety Research Institute of The University of Michigan, as well as experimental studies in animals, cadavers, and volunteer subjects.

Whiplash is a poorly defined term including ligamentous and muscle strains, hematomas, disc injuries, and less frequently, brain, eye and ear injuries. Diagnosis is difficult because clinical signs and Xrays, electromyography and electroencephalography findings are few. Protection and rest will cure most patients within a year but approximately 2/5th of patients have permanent symptoms and disability. Rear-end impact accidents cause the head and neck to hyperextend over the seat back. Whiplash occurs in 38% of exposed occupants. Head rests give protection but differential rebound may occur producing injurious hyperextension and whiplash. The larynx, trachea and esophagus, in front of the spine, are injured by impact against the dash or steering wheel. Airway obstruction may occur and cause death if not restored quickly. Permanent disability can occur because of scarring and partial airway or esophageal obstruction or vocal cord damage.

This paper presents an analysis of 67 neck injuries incurred in diving and sliding accidents in swimming pools. The accidents were investigated to establish the appropriate medical and mechanical factors involved. A mathematical model was developed to allow the prediction of the trajectory and velocity of the subjects prior to their injury. Nine of the accidents were selected for real life simulation. The simulation included the selection of test subjects of similar physical build to the accident victims who then performed the maneuvers leading to the injury, but in deeper water. High speed movies (200 frames per second) were taken, above and below the water, to measure the motion. A frame by frame analysis provided data to determine the trajectory and velocity profiles of the test subject. The maneuvers studied included diving from the pool edge, diving from various board types and sliding down various sliding board configurations.

Business and executive aviation represent a combined total of over 40% of the general aviation fleet, but (1977) accounted for only 8.37% of all general aviation accidents recorded. During the period 1964-1977 some 7,351 aircraft engaged in business flying, and 883 in corporate/executive operations, were involved in accidents reported by the NTSB. These accidents were reviewed utilizing the University of Michigan Computerized Accident Files to provide an overall view of the incidence and nature of business/executive aircraft accidents relative to occupant crash injuries. In addition more detailed case studies of selected accidents investigated including a Lear Jet 25B, Cessna 421, Beech Volpar Model 18, and Ted Smith Aerostar 601, are provided to illustrate specific types of crashworthiness, occupant protection, or post-crash emergency egress findings applicable to business/executive operations. Post-crash fire was reported in 29 cases (16.3%) during the 3-year period (1975-1977).