Search Results

Future space missions will involve humans and robots cooperatively performing operational tasks in various team combinations. Part of the required preparation for such missions includes understanding the issues involved in task allocation between disparate agents, and efficiently ordering tasks within the mission constraints. The scheduling tool developed in this research distributes pre-allocated task primitives between a cooperative human crew and dexterous robotic team. It combines real-world precedent constraints with algorithms from scheduling theory to reorder and tighten each crew member's individual schedule. The schedules minimize astronaut involvement time by stacking astronaut-performed tasks together in the schedule. This also minimizes astronaut workload in the completion of each task. Hubble Space Telescope Servicing Mission 3A was used as an example to test the allocation and scheduling tool.

Extensive prior research at the University of Maryland Space Systems Laboratory has identified significant operational advantages to high levels of integration between EVA crew and dexterous robotics. Crew performance on recent Hubble Space Telescope repair missions was broken down into task primitives, and evaluated for the impact of dexterous robotics in direct support of extravehicular activity. Results demonstrate that direct EVA-robotic cooperation can increase human performance in satellite servicing tasks by factors ranging from at least 60% (for highly complex and dexterous servicing tasks) to as much as 400% for more simple activities with greater levels of planned orbital replacement unit (ORU) interchange. This paper details experimental and analytical investigations of differing approaches to adding dexterous robotic capabilities to the EVA work site, via increasingly direct integration of robotics into the space suit system itself.

Real time knowledge of the metabolic workload of an astronaut during an Extra-Vehicular Activity (EVA) can be instrumental for space suit research, design, and operation. Three indirect calorimetry approaches were developed to determine the metabolic workload of a subject in an open-loop space suit analogue. A study was conducted to compare the data obtained from three sensors: oxygen, carbon dioxide, and heart rate. Subjects performed treadmill exercise in an enclosed helmet assembly, which simulated the contained environment of a space suit while retaining arm and leg mobility. These results were validated against a standard system used by exercise physiologists. The carbon dioxide sensor method was shown to be the most reliable and a calibrated version of it will be integrated into the MX-2 neutral buoyancy space suit analogue.

The next generation of pressure suits must enable large-scale planetary Extra-Vehicular Activities (EVA). Astronauts exploring the moon and Mars will be required to walk many kilometers, carry large loads, perform intricate experiments, and extract geological samples. Advanced pressure suit architectures must be developed to allow astronauts to perform these and other tasks simply and effectively. The research developed here demonstrates integration of robotics technology into pressure suit design. The concept of a robotically augmented pressure suit for planetary exploration has been developed through the use of analytical and experimental investigations. Two unique torso configurations are examined, including a Soft/Hard Upper Torso with individually adjustable bearings, as well as advances in Morphing Upper Torso research, in which an all-soft torso is analyzed as a system of interconnected parallel manipulators.

The University of Maryland Space Systems Laboratory has developed a system that replicates some limited aspects of pressure suits to facilitate neutral buoyancy research into EVA bioinstrumentation, advanced EVA training, and EVA/robotic interactions. After a two year upgrade from its MX-1 predecessor, the MX-2 space suit analogue is currently undergoing a variety of system integration tests in preparation for initial operational testing, leading to routine use for EVA simulation and as a testbed for advanced space suit technology. The MX-2 is built around a hard upper torso with integrated hemispherical helmet and rear-entry hatch. Three-layer soft-goods are used for the arms and lower torso, while an open loop air system regulates suit pressure to 3 psid. Wrist disconnects allow the use of standard EMU or Orlan gloves, or experimental gloves such as the mechanical counterpressure gloves and power-assisted gloves developed previously by the SSL.

Neutral buoyancy (NB) and parabolic flight (PF) are the only available human-scale three-dimensional spaceflight simulation environments. As such, both environments are used extensively for both research and mission operations purposes despite a lack of quantitative (or even qualitative) characterization of the fidelity of either environment to the spacelfight analog. The present study was undertaken as part of a larger research effort to begin to build such characterizations. Eight healthy adults (4 men and 4 women) were asked to adopt relaxed postures while ‘standing’ in space shuttle middeck standard-type foot restraints, in NB and during the 0g periods of PF. Subjects were tested in NB in 9 orientations, 3 trials each: Upright; tilted 45° Front, 45° Back, 45° Right, 45° Left; and tilted 90° Front, Back, Right, and Left. PF limitations prohibited 90° testing; consequently the PF test protocol included only Upright and 45° orientations.

With NASA's resources dedicated to the six-fold increase in extravehicular operations required for the construction of International Space Station, there are few or no opportunities to conduct neutral buoyancy research which requires the use of pressure suits. For this reason, the University of Maryland Space Systems Laboratory has developed a system which replicates some limited aspects of pressure suits to facilitate neutral buoyancy research into EVA bioinstrumentation and EVA/robotic interactions. The MX-2 suit analogue is built around a hard upper torso with integrated hemispherical helmet and rear-entry hatch. Three-layer soft goods (pressure bladder, restraint layer, and thermal/micrometeoroid garment with integral ballast system) are used for the arms and lower torso.

Past approaches to space suit glove evaluation have primarily been subjective. This report details efforts at the University of Maryland Space Systems Laboratory to use standardized dexterity tests and advanced biomechanics instrumentation to provide objective measures of glove performance. Ten subjects participated in the study. Tests were conducted barehanded, and wearing pressurized and unpressurized space suit gloves. Data on performance time, range of motion, dexterity, strength, fatigue, and comfort were collected. Range of motion data was measured using an experimental data glove that instrumented the movement of the joints of the right hand. The results indicated that performance time wearing pressurized gloves is not adequately estimated by performance wearing unpressurized gloves. Also, joint angle results indicated a decrease in the range of motion from the bare handed condition, but no significant difference between the gloved-hand conditions.

Neutral buoyancy (NB) and parabolic flight (PF) are the only presently available human-scale three-dimensional spaceflight simulation environments, and as such, both NB and PF are used extensively to simulate spaceflight conditions for both research and mission operations purposes. However, there is little or no quantitative (or even qualitative) material in the literature to characterize the fidelity of either environment to its analog. The present study was undertaken as part of a larger research effort to begin to build such characterizations. Eight healthy adults (4 men and 4 women) were asked to adopt relaxed postures while “standing” in space shuttle middeck standard-type foot restraints, in NB and during the 0g periods of PF. Subjects were tested in NB in 9 orientations, 3 trials each: Upright; tilted 45° Front, 45° Back, 45° Right, 45° Left; tilted 90° Front, 90° Back, 90° Right, and 90° Left.

The Space Systems Lab has evaluated several different types of generic hand controllers to see which performs the best when used by a suited subject. This paper outlines the types of hand controllers selected for this experiment and the results of the performance testing. The evaluation was conducted by subjects wearing spacesuit gloves in a partial pressure glovebox at a pressure differential of 4.3 pounds/square inch. Performance for each hand controller was measured by the completion of several one degree-of-freedom (DOF) tasks presented to the subject on a computer screen. Performance metrics for this experiment included the error associated with attempting to follow an ideal trajectory and a subjective Cooper-Harper questionnaire given after each session was complete. The same information was also collected for unpressurized suit gloves and for the bare hand.

The Ranger Telerobotic Shuttle Experiment (RTSX) is a Space Shuttle-based flight experiment to demonstrate key telerobotic technologies for servicing assets in Earth orbit. The flight system will be teleoperated from onboard the Space Shuttle and from a ground control station at the NASA Johnson Space Center. The robot, along with supporting equipment and task elements, will be located in the Shuttle payload bay. A number of relevant servicing operations will be performed-including extravehicular activity (EVA) worksite setup, orbital replaceable unit (ORU) exchange, and other dexterous tasks. The program is underway toward an anticipated launch date in CY2002. This paper gives an overview of the RTSX mission, and describes several follow-on mission scenarios involving cooperative Ranger and EVA activities.

Conventional ratcheting tools do not work efficiently in confined spaces and they have other limitations when used in space during extravehicular activity (EVA). The National Aeronautics and Space Administration’s (NASA) Goddard Space Flight Center has developed a three-dimensional (3-D) sprag/roller technology that has many benefits over the ratchet mechanism. The Space Systems Laboratory at the University of Maryland is using this technology in the development of EVA tools. The research discussed here describes the testing of an EVA roller wrench aboard NASA’s Reduced-Gravity Flying Laboratory (the KC-135), evaluation by astronauts in NASA/Johnson Space Center’s Neutral Buoyancy Laboratory, and the flight of a 3-D roller mechanism on Space Shuttle Mission STS-95.

The Ranger Telerobotic Flight Experiment is a highly complex teleoperated spacecraft, requiring direct human control of 36 major degrees of freedom. The University of Maryland Space Systems Laboratory and the NASA Ames Research Center are cooperating on the development of a virtual reality control station to streamline human interfaces with the Ranger spacecraft. This describes the design and integration of the Ranger Command Chair, a system incorporating fully immersive helmet-mounted stereo displays with head tracking, hand tracking for direct positional control, and supplemental controls and displays to allow a single operator to functionally control the entire vehicle. This system is currently undergoing tests with the Ranger Neutral Buoyancy Vehicle, a functionally identical vehicle used for systems development and flight operations simulations.