Search Results

Standard

Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification for

2024-04-23

CURRENT

AS7235A

This procurement specification covers solid rivets and hollow end rivets made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286 and of 80 ksi single shear strength at room temperature.

Standard

Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification for

2024-04-01

CURRENT

AS7210B

This procurement specification covers split cotter pins with optional ends (see Figure 1), made from a corrosion resistant steel of the type identified under the Unified Numbering System as UNS S30200.

Standard

Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification

2024-04-01

CURRENT

AS7211B

This procurement specification covers split cotter pins with optional ends (see Figure 1), made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S32100.

Standard

Spring Pins, Tubular, Carbon Steel, Procurement Specification for

2024-04-01

CURRENT

AS7205A

This specification covers tubular-shaped pins, fabricated from carbon steel, having a full-length longitudinal slot to permit flexure when inserted into a hole.

Standard

Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting

2023-01-17

CURRENT

AS5528F

This SAE Aerospace Standard (AS) establishes the surface pretreatment, temperature, and baking time required to cure AS5272 lubricant when it is applied over the surfaces of manufactured parts of various metals.

Standard

STUD - STRAIGHT, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .3750 - 16 UNS X .3750 - 24 UNF-3A

2022-06-02

CURRENT

AS126587C

Standard

Pins, Procurement Specification for, Metric

2021-12-01

CURRENT

MA4070A

This specification covers aircraft quality metric pins, such as straight, headless, headed, shouldered, and dowel, in metric sizes.

Standard

Safety Cable, Safety Wire, Key Washers, and Cotter Pins for Propulsion Systems, General Practices for Use of

2021-09-10

CURRENT

AS567L

This SAE Aerospace Standard (AS) covers devices whose primary function is the retention of fasteners, except for such devices that are integral with the item being retained.

Standard

STUD - STRAIGHT, CADMIUM PLATED, STEEL, SAE 8740, 125 KSI MIN, .3125-18UNS-3A X .3125-24 UNF-3A

2021-08-17

CURRENT

AS126275D

Standard

Chip Detector, Electrical Connection, Remote Indicating

2021-05-28

CURRENT

ARP843B

This Aerospace Recommended Practice is applicable to the design of remote indicating magnetic chip detectors installed in the lube systems, hydraulic systems, controls systems, gearboxes, constant speed drives, etc. of Aerospace Power Plants. It is not applicable to the touch-to-test type terminal models.

Standard

Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification

2021-04-05

CURRENT

AS5272F

This SAE Aerospace Standard (AS) establishes the requirements for heat cured solid film lubricants. For other general or high temperature applications, refer to AS1701. This document requires qualified products.

Standard

Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting

2020-08-03

HISTORICAL

AS5528E

This SAE Aerospace Standard (AS) establishes the surface pretreatment, temperature, and baking time required to cure AS5272 lubricant when it is applied over the surfaces of manufactured parts of various metals.

Standard

Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting

2020-03-10

HISTORICAL

AS5528D

This SAE Aerospace Standard (AS) establishes the surface pretreatment, temperature, and baking time required to cure AS5272 lubricant when it is applied over the surfaces of manufactured parts of various metals.

Standard

Rivets, Carbon Steel Procurement Specification for

2020-01-03

CURRENT

AS7225B

This procurement specification covers aircraft-quality solid rivets and tubular end rivets made from a carbon steel of the type identified under the Unified Numbering System as UNS G10100.

Standard

Safety Cable Kit Procurement Specification and Requirement for Use

2019-10-31

CURRENT

AS4536D

This procurement specification covers aerospace quality safety cable kits consisting of safety cables and ferrules made from the same corrosion and heat resistant steels and a nickel base alloy of the type identified under the Unified Numbering System as follows: a UNS S30400 - Corrosion resistant steel (AMS5697, AMS5560) b UNS S32100 - Corrosion and heat resistant steel (AMS5689, AMS5570) c UNS N06600 - Nickel base alloy (AMS5687, AMS5580) d UNS N06625 - Nickel alloy, corrosion resistant (AMS5666, AMS5581) The requirements for installation practices are also specified.

Standard

Boss - Plug/Pin, Expansion Type Hole Preparation

2019-08-15

CURRENT

AIR3276

Standard

Groove Design - Metal Face Seal

2019-06-06

CURRENT

AIR1108A

Groove designs presented herein are applicable for use with machined or formed metal seals which are similar in configuration to those shown in figure 3, which operate under internal pressure or in vacuum service and which have been specifically qualified or recommended by the purchaser or the manufacturer for use with this AIR. They are also applicable for use with metal o-rings (e.g., MS9142, MS202 thru MS9205) where interchangeability with machined or formed metal seals is desired. For metal o-ring groove designs where inter-changeability is not a requirement refer to ARP 674.

Standard

Inserts, Screw Thread, Helical Coil 19Cr-9.2Ni, Corrosion Resistant Steel, Procurement Specification for

2019-02-13

CURRENT

AS7245B

This specification covers closely-wound helical coil, screw thread inserts made of a corrosion resistant steel formed wire with a chemical composition in accordance with Table 1 and identified under the Unified Numbering System as UNS S30200 or UNS S30400 that can be formed by an insert manufacturer to achieve the requirements of this procurement specification. The inner surface of the insert coil, after assembly into a screw thread tapped hole, provides internal threads of standard 60° Unified form.

Standard

Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection

2018-10-26

CURRENT

AS3071C

To establish the acceptance criteria for discontinuities as revealed by magnetic particle or liquid penetrant examination of aircraft utility parts as in 1.2.

Standard

Spacers and Washers, Procurement Specification for, Metric

2018-10-16

CURRENT

MA1784A

This specification covers metric aircraft quality spacers for use as positioners for tubes, flat washers for use as load spreaders, galling protection of adjacent surfaces and or material compatibility, and key or tab washers for use as locks for bolts, nuts, and screws.