Search Results

This study explores the dynamics of head and cervical spine impact with the specific goals of determining the effects of head inertia and impact surface on injury risk. Head impact experiments were performed using unembalmed head and neck specimens from 22 cadavers. These included impacts onto compliant and a rigid surfaces with the surface oriented to produce both flexion and extension attitudes. Tests were conducted using a drop track system to produce impact velocities on the order of 3.2 m/s. Multiaxis transduction recorded the head impact forces, head accelerations, and the reactions at T1. The tests were also imaged at 1000 frames/sec. Injuries occurred 2 to 30 msec following head impact and prior to significant head motion. Head motions were not found to correlate with injury classification. Decoupling was observed between the head and T1, resulting in a lag in the force histories.

Basilar skull fractures comprise a broad category of injuries that have been attributed to a variety of causal mechanisms including mandibular impacts. The objective of this work is to develop an understanding of the biomechanical mechanisms that result in basilar skull fractures when the head is subject to a mandibular impact. In the characterization of the injury mechanism, two experimental studies have been performed. The first study evaluated the tolerance of the mandible subject to midsymphysis loading on the mental protuberance (chin). Five dynamic impacts using a vertical drop track and one quasi-static test in a servo-hydraulic test frame have been performed. Impact surfaces were varied to assess the influence of loading rate. The mean mandibular fracture tolerance among the six tests was 5270 ± 930 N and appears insensitive to loading rate. In each test, clinically relevant mandibular fractures were produced. No basilar skull fractures were observed.

The objective of the study was to investigate the biomechanical response of the intact cranium. Unembalmed human cadavers were used in the study. The specimens were transected at the base of the skull leaving the intracranial contents intact; x-ray and computed tomography (CT) scans were obtained. They were fixed in a specially designed frame at the auditory meatus level and placed on the platform of an electrohydraulic testing device via a six-axis load cell. Following radiography, quasistatic loading to failure was applied to one of the following sites: frontal, vertex, parietal, temporal, or occipital. Retroreflective targets were placed in two mutually orthogonal planes to record the localized temporal kinematics. Applied load and piston displacement, and the output generalized force (and moment) histories were recorded using a modular digital data acquisition system. After the test, x-ray and CT images were obtained, and defleshing was done.

Head injury is a serious threat to lives of people working around farm machinery. The consequence of head injuries are costly, paralytic, and often fatal. Clinical and biomechanical data on head injuries are reviewed and their application in the analysis of head injury risk associated with farm tractor discussed. A significant proportion of tractor-related injuries and deaths to adults, as well as children, is due directly or indirectly to head injury. An improved injury reporting program and biomechanical studies of human response to tractor rollover, runover, and falls, are needed to understand mechanisms of the associated head injury.

The passive combined flexion and axial loading responses of the unembalmed human cervical spine were measured in a dynamic test environment. The influence of end condition (the degree of constraint imposed on the head by the contact surface) was varied to determine its effect on observed column stiffness and on failure modes of the cervical spine. Multi-axis load cells were used to completely describe the forces and moments developed in the specimen. Twenty three specimens were studied. The Hybrid III neckform performance was assessed to determine its suitability as a mechanical simulator of the neck during head impact. Changes in end condition produced significant changes in axial stiffness in both the Hybrid III neckform and the cadaver neck. The mode of injury also varied as a function of end condition in a repeatable fashion. Separation of injuries based upon imposed end condition identified groups with significantly different axial load to failure.

The lateral, anterior and posterior passive bending responses of the human cervical spine were investigated using unembalmed cervical spinal elements obtained from cadavers. Bending stiffness was measured in six modes ranging from tension-extension through compression-flexion. Viscoelastic responses studied included relaxation, cyclic conditioning and constant velocity deformation. A five-axis load cell was used to measure the applied forces. Results include moment-angle curves, relaxation moduli and the effect of cyclic conditioning on bending stiffness. The Hybrid III ATD neckform was also tested and its responses are compared with the human. It was observed that the Hybrid III neckform was more rate sensitive than the human, that mechanical conditioning changed the stiffness of the human specimens significantly, and that changing the end condition from pinned-pinned to fixed-pinned increased the stiffness by a large factor.

The objectives of this study are to quantify the biomechanical properties of the human neck which govern head and neck dynamic response and to establish the mechanisms responsible for primary aspects of response. Computer simulations with the MVMA 2-D and VOM 3-D occupant dynamics models were performed using head and neck sled input response data from human subjects at the Naval Biodynamics Laboratory for input and comparison. Predicted dynamic response data and preliminary values for biomechanical parameters in a three-dimensional head/neck model capable of accurately simulating response for −X, +Y, and −X+Y sled acceleration vectors are presented. The established analytical model should accurately predict head and neck responses in simulations of real-world automobile crashes where direct head impact is not involved. Additionally, the model can be used to assist in development of a design plan for the neck of advanced anthropomorphic test dummies.

Time-varying compressive loading was applied to unembalmed human cervical spines using an MTS closed-loop hydraulic testing machine. Load programs included relaxation, cyclic loading, variable rate constant velocity loading (0.13-64 cm/sec), and constant velocity loading to failure. The failures produced were similar to those observed clinically. A generalized quasi-linear viscoelastic Maxwell-Weichert model incorporating a continuous relaxation spectrum was developed to predict the relaxation and constant velocity test responses. The fit was adequate considering the complexity of the structure involved.

In a crash, impact against the steering assembly can be a major cause of serious and fatal injury to drivers. But the interrelationship between injury protection and factors of surface area, configuration, padding, relative position of the spokes, and number and stiffness of spokes and rim is not clear. This paper reports a series of high-G sled tests conducted with anesthetized animal subjects in 30 mph impacts at 30 G peaks. A total of eight tests were conducted, five utilizing pig subjects, one a female chimpanzee, one an anthropomorphic dummy, and one test with no subject. Instrumentation included closed circuit TV, a tri-axial load cell mounted between the steering wheel and column, seat belt load measurement, six Photo-Sonics 1000 fps motion picture cameras, and poloroid photography. Medical monitoring pre, during and post-impact was followed by gross and microscopic tissue examination.

Accurate data on the body dimensions of truck drivers are needed and such data are not presently available. This paper provides basic source data and an anthropometrical overview of the usefulness and limitations of existing data bases; discusses the influence of population factors, including age, sex, and demographic variables; and reviews population sampling problems. Heavy truck drivers as a whole appear to represent a physically different population from that of either the U.S. general population or other professional groups. Future anthropometric surveys must provide information for improved accommodation for the increasing range of physical size of users, and for obtaining data more useful to engineers involved in heavy truck interior cab design.

This paper presents an analysis of 67 neck injuries incurred in diving and sliding accidents in swimming pools. The accidents were investigated to establish the appropriate medical and mechanical factors involved. A mathematical model was developed to allow the prediction of the trajectory and velocity of the subjects prior to their injury. Nine of the accidents were selected for real life simulation. The simulation included the selection of test subjects of similar physical build to the accident victims who then performed the maneuvers leading to the injury, but in deeper water. High speed movies (200 frames per second) were taken, above and below the water, to measure the motion. A frame by frame analysis provided data to determine the trajectory and velocity profiles of the test subject. The maneuvers studied included diving from the pool edge, diving from various board types and sliding down various sliding board configurations.

Business and executive aviation represent a combined total of over 40% of the general aviation fleet, but (1977) accounted for only 8.37% of all general aviation accidents recorded. During the period 1964-1977 some 7,351 aircraft engaged in business flying, and 883 in corporate/executive operations, were involved in accidents reported by the NTSB. These accidents were reviewed utilizing the University of Michigan Computerized Accident Files to provide an overall view of the incidence and nature of business/executive aircraft accidents relative to occupant crash injuries. In addition more detailed case studies of selected accidents investigated including a Lear Jet 25B, Cessna 421, Beech Volpar Model 18, and Ted Smith Aerostar 601, are provided to illustrate specific types of crashworthiness, occupant protection, or post-crash emergency egress findings applicable to business/executive operations. Post-crash fire was reported in 29 cases (16.3%) during the 3-year period (1975-1977).

Statistics indicate that during the past decade (1967-1976) the number of general aviation aircraft involved in an accident is equivalent to at least 38% of the total U.S. production during that period. Estimates that an aircraft will be involved in an accident over a 20 year life range are as high as 60-70%. Recognition of this probability has led to crashworthiness and occupant survivability “packaging” design concepts as offering the most realistic approach to reduction of serious and fatal injuries when an accident occurs. This paper reviews and illustrates current general aviation aircraft accident experience relative to occupant impact injury and damage indexes, and provides new data relative to current-generation aircraft.

A study of free-fall accidents and resulting injuries was conducted to determine how useful these types of data could be in establishing human injury tolerance limits. “Tolerance” was examined primarily for children at two levels - reversible injury and threat to survival. The specific objectives were to investigate specific free-falls in sufficient depth to permit biomedical or mathematical reconstruction of the fall, simulate selected free-falls to estimate impact response, and compare predicted responses with observed injuries as a means of estimating human tolerance levels. From more than 2100 reported free-falls, 110 were investigated on-site. Seven head-first and three feet-first falls were then simulated using the MVMA 2-D Crash Victim Simulator. Newspaper reports of free-falls showed that males fell six times as often as females and most often while at work. Children fell from windows and balconies more often than from any other hazard.

The importance of crashworthiness and the role of restraint systems in occupant impact protection in U.S. civil aircraft design is being increasingly recognized. Current estimates of the number of fatalities which could be prevented annually in survivable accidents range from 33 to 94%. This study reviews the development of existing Federal Aviation Administration restraint system standards from the first requirement for safety belts in the Air Commerce Regulations of 1926 to present 14 CFR 1.1. The FAA and industry standards are critically evaluated for Parts 23 (small airplanes), 25 (air transports), 27 (rotorcraft), and 29 (transport category rotorcraft). State-of-the-art developments, including an overview of previous accident experience, results of experimental studies, comparison with other standards, and primary data sources are provided.

General aviation accident investigations can provide valuable data to the design engineer concerning the crash performance of current models and can indicate needed improvements for occupant protection in future aircraft. Current statistics and the historical background of major investigations during the past 65 years are provided. A five-year study of general aviation accidents occurring in the State of Michigan is used as a basis to illustrate recent findings relative to occupant injury mechanisms, relative crash protection, and crashworthiness performance of current models of aircraft. Results indicate that the degree of structural damage may not relate to the degree of occupant injury when the cabin area remains relatively intact. A primary requirement is documented for adequate upper-torso restraint for all occupants, and the excellent crash performance of such a system is described.

Properties of the human neck which may influence a person's susceptibility to “whiplash” injury during lateral impact have been studied in 96 normal subjects. Subjects were chosen on the basis of age, sex, and stature and data were grouped into six primary categories based on sex (F, M) and age (18-24, 35-44, 62-74). The data include: measures of head, neck and body anthropometry in standing and simulated automotive seating positions, three-dimensional range of motion of the head and neck, head/neck response to low-level acceleration, and both stretch reflex time and voluntary isometric muscle force in the lateral direction. Reflex times are found to vary from about 30 to 70 ms with young and middle aged persons having faster times than older persons, and females having faster times than males. Muscle strength decreases with age and males are, on the average, stronger than females.

A new crash test device has been developed, called “Repeatable Pete.” It is a repeatable, durable anthropomorphic dummy with humanlike dynamic performance. This paper describes the device and gives details of its design and performance during testing in automotive situations. The head, neck, and chest match the latest biomechanical information on the dynamic responses of unembalmed cadavers. The head c.g. accelerations adequately match the skull acceleration, so that head injury criteria based upon cadaver skull acceleration may be used.

Basic physical characteristics of the neck have been defined which have application to the design of biomechanical models, anthropometric dummies, and occupant crash protection devices. The study was performed using a group of 180 volunteers chosen on the basis of sex, age (18-74 years), and stature. Measurements from each subject included anthropometry, cervical range-of-motion (observed with both x-rays and photographs), the dynamic response of the cervical flexor and extensor muscles to a controlled jerk, and the maximum voluntary strength of the cervical muscles. Data are presented in tabular and graphic form for total range-of-motion, cervical muscle reflex time, decelerations of the head, muscle activation time, and cervical muscle strength. The range-of-motion of females was found to average 1-12 deg greater than that of males, depending upon age, and a definite degradation in range-of-motion was observed with increasing age.

This paper describes the development of an improved neck simulation that can be adapted to current anthropometric dummies. The primary goal of the neck design is to provide a reasonable simulation of human motion during impact while maintaining a simple, rugged structure. A synthesis of the current literature on cervical spine mechanics was incorporated with the results of x-ray studies of cervical spine mobility in human volunteers and with the analysis of head-neck motions in human volunteer sled tests to provide a background for the design and evaluation of neck models. Development tests on neck simulations were carried out using a small impact sled. Tests on the final prototype simulation were also performed with a dummy on a large impact sled. Both accelerometers and high-speed movies were used for performance evaluation.