Search Results

The current trend toward hybrid and electric automotive powertrains increases the complexity of the vehicle development and integration work for the NVH engineers. For example, considering that the combustion noise is reduced or absent, secondary noise sources like drivetrain, auxiliary systems, road and wind noise become of relevance in terms of vehicle noise comfort. This trend combined with the shortening of vehicle development cycle, the increased number of vehicle variants and an increasingly competitive marketing landscape, force engineers to front-load their design choices to the early stages of the development process using advanced engineering analysis tools. In this context, innovative technologies such as Virtual Prototype Assembly (VPA) and NVH simulator provide the right support to the engineer’s needs when developing the vehicles of the future.

The noise radiated by an ICE engine results from a mixture of various complex sources such as combustion, injection, piston slap, turbocharger, etc. Some of these have been categorized as combustion related noise and others as mechanical noise. Of great concern is the assessment of combustion noise which, under some operating conditions, is likely to predominate over the other sources of noise. The residual noise, produced by various other sources, is commonly referred to as mechanical noise. Being able to extract combustion and mechanical noise is of prime interest in the development phase of the engine and also for diagnostic purposes. This paper presents the application of combustion mechanical noise separation techniques on a V8 engine. Three techniques, namely the multi regression analysis, the classical Wiener filter and the cyclostationary (synchronous) Wiener filter, have been investigated.

Certification of vehicle noise emissions for passenger vehicles, motorcycles and light trucks is achieved by measuring external sound levels according to procedures defined by international standards such as ISO362. The current procedure based on a pass-by test during wide-open throttle acceleration is believed far from actual urban traffic conditions. Hence a new standard pass-by noise certification is being evaluated for implementation. It will put testing departments through their paces with requirements for additional testing under multiple ‘real world’ conditions. The new standard, together with the fact that most governments are imposing lower noise emission levels, make that most of the current models do not meet the new levels which will be imposed in the future. Therefor automotive manufacturers are looking for new tools which are giving them a better insight in the Pass-by Noise contributors.

The Transfer Path Analysis method is at the core of the Source-Transfer-Receiver approach to address noise and vibration problems. While originally developed for analyzing structure-borne noise transmission, its application range has been extended to airborne noise. Various frequency and time domain approaches have been developed with a focus of supporting specific design engineering problems. One such application is the source contribution analysis in the context of vehicle pass-by-noise. The upcoming changes in the pass-by noise regulation will not only require more complex tests in different conditions but most importantly, the new directive will force car manufacturers to further reduce the emitted noise levels of their vehicles.

A key issue in noise emission studies of noise producing machinery concerns the identification and analysis of the noise sources and their interaction and radiation into the far field. This paper presents a new acoustic measurement technique for noise source identification in stationary applications. The core of the technology is a handheld measurement instrument combining a position and orientation tracking device with a 3D sound intensity probe. The technique allows an on-line 3D visualization of the sound field while moving the probe freely around the test object. By focusing on the areas of interest, troublesome areas can be identified that require further in-depth analysis. The measurement technique is flexible, interactive and widely applicable in industrial applications. This paper explains the working principle and characteristics of this new technology and positions it to existing methods like traditional sound intensity testing and array techniques.

One of the practical consequences of the development of low CO₂ emission cars is that many of the traditional NVH sound engineering processes no longer apply and must be revisited. Different and new sound sources, new constraints on vehicle body design (e.g., due to weight) and new sound perception characteristics make that the NVH knowledge built on generations of internal combustion-powered vehicles cannot be simply transferred to Hybrid and Electric Vehicles (HEV). Hence, the applicability of tools must be reviewed and extensions need to be developed where necessary. This paper focuses on sound synthesis tools as developed for ICE-powered vehicles. Because of the missing masking effect and the missing intake and exhaust noise of the Internal Combustion Engine (ICE) in electric vehicles, on one hand electric vehicles are quieter than traditional vehicles.

Vehicles with electrified powertrains are being introduced at an increasing pace. On the level of interior sound, one is often inclined to assume that NVH problems in EV have disappeared together with the combustion engine. Three observations demonstrate that this is not the case. First of all, only the dominant engine sound disappears, not the noise from tire, wind or auxiliaries, which consequently become increasingly audible due to the removal of the broadband engine masking sound. Secondly, new noise sources like tonal sounds from the electro-mechanical drive systems emerge and often have, despite their low overall noise levels, a high annoyance rating. Thirdly, the fact that engine/exhaust sounds are often used to contribute to the “character” of the vehicle leads to an open question how to realize an appealing brand sound with EV. Hybrid vehicles are furthermore characterized by mode-switching effects, with impact on both continuity feeling and sound consistency problems.

The investigation of critical noise sources on pass-by noise tests is demanding development of the current techniques in order to locate and quantify these sources. One recent approach is to use beamforming techniques to this purpose. The phased array information can be processed using several methods, for example, conventional delay-and-sum algorithms, deconvolution based algorithms, such as DAMAS, and more recently, the generalized inverse beamforming. This later method, presents the advantage of separating coherent sources with better dynamic range than conventional beamforming. Also, recent developments, such as Iteratively Re-Weigthing Least Squares, increases the localization accuracy allowing it to be used in a challenging problem as a fast moving source detection, a non-stationary condition. The work will raise the main advantages and disadvantages on this method using a practical case, a passenger vehicle pass-by test.

This paper presents a new time-domain source contribution analysis method for in-room pass-by noise. The core of the method is a frequency-domain ASQ model (Airborne Source Quantification) representing each noise generating component (engine, exhaust, left and right tyres, etc.) by a number of acoustic sources. The ASQ model requires the measurement of local FRF's and acoustic noise transfer functions to identify the operational loads from nearby pressure indicator responses and propagate the loads to the various target microphones on the sides of the vehicle. Once a good ASQ model is obtained, FIR filters are constructed, allowing a time-domain synthesis of the various source contributions to each target microphone. The synthesized target response signals are finally recombined into a pass-by sound by taking into account the speed profile of the vehicle.

15 years of NVH applications make Transfer Path Analysis (TPA) appear a commodity tool. But despite the fact that TPA is today successfully used in a large variety of applications in automotive and mechanical industries, its main bottleneck remains the huge measurement time to build the full TPA model. This paper presents a new TPA method that provides a good compromise between path accuracy and measurement time. The method is also referred to as OPAX. The key idea of OPAX is the use of simplified parametric load models with limited number of model parameters. The main advantage of this is that one should measure only a small amount of FRF data to identify the operational loads. This drastically reduces measurement time and efforts. In addition to this, the OPAX method does not require mount stiffness data and allows a simultaneous identification of structural and acoustic paths.

Since its first publication in the beginning of the eighties, Transfer Path Analysis (TPA) has evolved into a widely used tool for noise and vibration troubleshooting and internal load estimation, and this for single source as well as multivariate problems. One of the main bottlenecks preventing its even more widespread use in the actual vehicle development process is the test time to build the full data model, requiring not only in-operation tests but also extensive Frequency Response Function tests. As a consequence, several new approaches have appeared over the past years attempting to circumvent this limitation, such as Fast and Multilevel TPA and Operational TPA. The latter method attracts quite some attention as it only requires operational data measured at the path references and target locations.

Aircraft noise modeling aims to provide designers with computational tools that allow exploring the design parameters domain early in the design and development process. A number of modeling techniques are available for acoustics and vibration prediction, but in order to define objective targets for sound quality perception, dedicated tools are still needed to correlate structural models and design modifications with human perception of sounds. This paper presents a model-based sound synthesis concept for interior and exterior aircraft noise that allows interactive, real-time sound reproduction and replay. The proposed approach is presented through two application cases: jet flyover noise and turboprop interior noise.