Search Results

This SAE Recommended Practice establishes a procedure for determination of vehicle road load force for speeds between 115 km/h and 15 km/h (or between 70 mph and 10 mph). It employs the coastdown method and applies to vehicles designed for on-road operation. The final result is a model of road load force (as a function of speed) during operation on a dry, level road under reference conditions of 20 °C (68 °F), 98.21 kPa (29.00 in-Hg), no wind, no precipitation, and the transmission in neutral.

This SAE Recommended Practice establishes uniform procedures for evaluating conformity between the actual and target drive speeds for chassis dynamometer testing utilizing standard fuel economy and emissions drive schedules.

This SAE Recommended Practice establishes uniform procedures for evaluating conformity between the actual and target drive speeds for chassis dynamometer testing utilizing standard fuel economy and emissions drive schedules.

This procedure covers vehicle operation and electric dynamometer load coefficient adjustment to simulate track road load within dynamometer inertia and road load simulation capabilities.

This procedure covers measurement of vehicle road load on a dry, straight, level road at speeds less than 113 km/h (70 mi/h).

This procedure covers measurement of vehicle road load on a dry, straight, level road at speeds less than 113 km/h (70 mi/h).

This procedure is a modification of the urban driving cycles noted in SAE J1082 and which is run on a suitable road or test track. The procedure yields cold start/warm-up fuel economy values indicative of consumer level at the ambient condition of the test. Within referenced limitations, the procedure can be utilized to determine the fuel economy differential among vehicles or between vehicle changes. Purpose This SAE Recommended Practice provides a uniform test procedure for measuring the fuel economy of light-duty vehicles during cold start and warm-up operation (motor vehicles designed primarily for transportation of persons or property and rated at 4500 kg GVW (10 000 lb) or less) on suitable roads.

This SAE Recommended Practice establishes uniform procedures for testing electric battery-powered vehicles which are capable of being operated on public and private roads. It is the intent of this document to provide standard tests which will allow various performance characteristics of electric vehicles to be cross-compared on a common basis in specifications, technical papers, and engineering discussions. The tests concern attributes of the total vehicle system rather than those of its subsystems and components. Tests of components such as batteries are the subject of separate procedures. The road tests specified in this document are recommended for use whenever possible particularly to establish vehicle performance specifications. The dynamometer procedures are included primarily to facilitate development testing. Section 3 provides definitions of terminology used in this document.

This SAE Recommended Practice establishes uniform procedures for testing electric battery-powered vehicles which are capable of being operated on public and private roads. It is the intent of this document to provide standard tests which will allow various performance characteristics of electric vehicles to be cross-compared on a common basis in specifications, technical papers, and engineering discussions. The tests concern attributes of the total vehicle system rather than those of its subsystems and components. Tests of components such as batteries are the subject of separate procedures. The road tests specified in this document are recommended for use whenever possible particularly to establish vehicle performance specifications. The dynamometer procedures are included primarily to facilitate development testing. Section 3 provides definitions of terminology used in this document.

This SAE Recommended Practice establishes a procedure for determination of vehicle road load force for speeds between 115 and 15 km/h (71.5 and 9.3 mph). It employs the coastdown method and applies to vehicles designed for on-road operation. The final result is a model of road load force (as a function of speed) during operation on a dry, level road under reference conditions of 20 °C (68 °F), 98.21 kPa (29.00 in-Hg), no wind, no precipitation, and the transmission in neutral.

This procedure covers measurement of vehicle road load on a straight, level road at speeds less than 113 km/h (70 mph).

This SAE Recommended Practice establishes uniform procedures for testing electric battery-powered vehicles which are capable of being operated on public and private roads. It is the intent of this document to provide standard tests which will allow various performance characteristics of electric vehicles to be cross-compared on a common basis in specifications, technical papers, and engineering discussions. The tests concern attributes of the total vehicle system rather than those of its subsystems and components. Tests of components such as batteries are the subject of separate procedures. The road tests specified in this document are recommended for use whenever possible particularly to establish vehicle performance specifications. The dynamometer procedures are included primarily to facilitate development testing. Paragraph 2.2 provides definitions of terminology used in this document.

This SAE Recommended Practice establishes uniform procedures for testing electric battery-powered vehicles which are capable of being operated on public and private roads, and is to replace the range and vehicle energy economy sections SAE J227a. The procedure addresses electric vehicles (EVs) only. It is the intent of this practice to provide standard tests which will allow for determination of energy consumption and range based on the Federal Emission Test Procedure (FTP) and the Highway Fuel Economy Test Procedure (HWFET). Realistic alternatives should be allowed for new technology. Performance is judged on the total vehicle system and the battery. Dynamometer test procedures are specified in this document in order to minimize the test-to-test variations inherent with track testing and to adhere to standard industry practice for energy consumption and range testing. Section 2 provides definitions of terminology used in this document.

This procedure covers measurement of vehicle road load on a straight, level road at speeds less than 113 km/h (70 mph).

This procedure covers measurement of vehicle road load on a straight, level road at speeds less than 70 mph (113 km/h).

This procedure covers measurement of vehicle road load on a straight, level road at speeds less than 70 mph (113 km/h).