Refine Your Search

Topic

Search Results

Standard

Maximum Exterior Sound Level for Snowmobiles

2021-03-01
CURRENT
J192_202103
This SAE Standard establishes the instrumentation, test site, and test procedure for determining the maximum exterior sound level for snowmobiles.
Standard

Snowmobile Brake Control Systems

2021-01-27
CURRENT
J1282_202101
This SAE Standard establishes a uniform testing procedure and performance requirements for a snowmobile brake control systems.
Standard

Maximum Exterior Sound Level for Snowmobiles

2020-01-15
HISTORICAL
J192_202001
This SAE standard establishes the instrumentation, test site, and test procedure for determining the maximum exterior sound level for snowmobiles. Sound propagation is directly related to the ground cover and provides the largest variation to the measured result. A correction factor is introduced to improve year-round test repeatability of the results on grass surfaces by correcting their spectrum to be similar to snow-covered spectra. Measured sound pressure levels are also highly dependent on the degree of track slip present when performing the vehicle acceleration. Operators should attempt to limit track slip as much as possible while maintaining the requirements described in 5.1.1.
Standard

Tests for Snowmobile Switching Devices and Components

2019-10-07
CURRENT
J68_201910
This SAE Recommended Practice covers standardized basic tests, test methods, and requirements applicable to electromechanical switching devices which may be used on snowmobiles as defined in SAE J33.
Standard

Snowmobile Throttle Control Systems

2019-06-06
CURRENT
J92_201906
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand throttle control systems. This recommendation is not intended to cover competition vehicles, nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand-control systems using an outer flexible conduit with a multiple strand inner cable, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Snowmobile Brake Control Systems

2019-02-27
HISTORICAL
J1282_201902
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand brake control systems. This recommendation is not intended to cover competition vehicles, nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable or hydraulic type brake control system, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Maximum Exterior Sound Level for Snowmobiles

2019-01-23
HISTORICAL
J192_201901
This SAE Recommended Practice establishes the instrumentation, test site, and test procedure for determining the maximum exterior sound level for snowmobiles. Sound propagation is directly related to the ground cover and provides the largest variation to the measured result. A correction factor is introduced to improve year-round test repeatability of the results on grass surfaces by correcting their spectrum to be similar to snow-covered spectra. Measured sound pressure levels are also highly dependent on the degree of track slip present when performing the vehicle acceleration. Operators should attempt to limit track slip as much as possible while maintaining the requirements described in 5.1.1.
Standard

Tests for Snowmobile Switching Devices and Components

2017-04-04
HISTORICAL
J68_201704
This SAE Recommended Practice covers standardized basic tests, test methods, and requirements applicable to electromechanical switching devices which may be used on snowmobiles as defined in SAE J33.
Standard

Maximum Exterior Sound Level for Snowmobiles

2013-01-10
HISTORICAL
J192_201301
This SAE Recommended Practice establishes the instrumentation, test site, and test procedure for determining the maximum exterior sound level for snowmobiles. Sound propagation is directly related to the ground cover and provides the largest variation to the measured result. A correction factor is introduced to improve year round test repeatability of the results on grass surfaces by correcting their spectrum to be similar to snow covered spectra. Measured sound pressure levels are also highly dependent on the degree of track slip present when performing the vehicle acceleration. Operators should attempt to limit track slip as much as possible while maintaining the requirements described in 5.1.1.
Standard

Snowmobile Brake Control Systems

2012-04-09
HISTORICAL
J1282_201204
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand brake control systems. This recommendation is not intended to cover competition vehicles nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable or hydraulic type brake control system, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Maximum Exterior Sound Level for Snowmobiles

2011-03-06
HISTORICAL
J192_201103
This SAE Recommended Practice establishes the instrumentation, test site, and test procedure for determining the maximum exterior sound level for snowmobiles. Sound propagation is directly related to the ground cover and provides the largest variation to the measured result. A correction factor is introduced to improve year round test repeatability of the results on grass surfaces by correcting their spectrum to be similar to snow covered spectra. Measured sound pressure levels are also highly dependent on the degree of track slip present when performing the vehicle acceleration. Operators should attempt to limit track slip as much as possible while maintaining the requirements described in 5.1.1.
Standard

Snowmobile Throttle Control Systems

2010-08-26
HISTORICAL
J92_201008
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand throttle control systems. This recommendation is not intended to cover competition vehicles nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Tests for Snowmobile Switching Devices and Components

2004-02-24
HISTORICAL
J68_200402
This SAE Recommended Practice covers standardized basic tests, test methods, and requirements applicable to electromechanical switching devices which may be used on snowmobiles as defined in SAE J33.
Standard

SNOWMOBILE THROTTLE CONTROL SYSTEMS

1995-05-01
HISTORICAL
J92_199505
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand throttle control systems. This recommendation is not intended to cover competition vehicles nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

RECOMMENDATIONS FOR CHILDREN'S SNOWMOBILE

1984-10-01
HISTORICAL
J1038_198410
This recommended practice establishes the test procedures, performance requirements, and criteria necessary to evaluate minimum safety and reliability requirements of a children's snowmobile as identified in paragraph 1.3.
Standard

RECOMMENDATIONS FOR CHILDREN’S SNOWMOBILE

1980-02-01
HISTORICAL
J1038_198002
This recommended practice establishes the test procedures, performance requirements, and criteria necessary to evaluate minimum safety and reliability requirements of a children’s snowmobile as identified in Section 1.3.
X