Refine Your Search

Search Results

Standard

Digital Annex of Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature

2019-11-11
WIP
J2403DA

This document is intended to supplement SAE J2403 by providing the content of Table 1, Table 2, and Table 3 from SAE J2403 in a form that can be sorted and searched for easier use. It is NOT intended as a substitute for the actual document, and any discrepancies between this Digital Annex and the published SAE J2403 document must be resolved in favor of the published document. This document provides the content of Table 1 and Table 2 published in SAE J2403 into the single table in the 'Term' tab, while the 'Recommended Term Definitions' tab provides the content of Table 3 in SAE J2403 and the 'Glossary' tab provides the content of Table 4 in SAE J2403.

Standard

SAE J1939 Functional Safety Communications Protocol

2019-07-15
WIP
J1939-76

This document provides the technical requirements for implementing the SAE J1939 Functional Safety Communication Protocol in a manner determined suitable for meeting industry applicable functional safety standards.

Standard

OBD Traceability Matrix

2019-02-05
CURRENT
J1939-90_201902
This Information Report is intended to supplement the J1939 documents by offering the application of SAE RP J1939 to OBD data communications in a form that can be sorted and searched for easier use. It is NOT intended as a substitute for the actual regulations and standards documents, and any discrepancies between this document and the published documents must be resolved in favor of the published documents. This spreadsheet outlines elements in ARB OBD II and HD OBD requirements and identifies which J1939 SPNs and messages may be used to satisfy the datastream, readiness, in-use ratio, and test results requirements.
Standard

SAE J1939 Functional Safety Communications Protocol

2018-11-26
CURRENT
J1939-76_201811
This document provides the technical requirements for implementing the SAE J1939 Functional Safety Communication Protocol in a manner determined suitable for meeting industry applicable functional safety standards.
Standard

Automatic Baud Rate Detection Process

2018-11-05
CURRENT
J1939/16_201811
Define a process enabling devices to detect the baud rate of a SAE J1939-11, SAE J1939-14, or SAE J1939-15 network automatically with the intent of minimizing or eliminating communication disruption between existing devices. These networks only support CBFF and CEFF Data Frames, as defined in ISO 11898-1.
Standard

Network Layer

2018-09-13
CURRENT
J1939/31_201809
SAE J1939-31 Network Layer describes the requirements and services for Network Interconnection ECUs (NIECU) that enable electronic control units (ECUs) on a network segment to intercommunicate with other ECUs on different network segments of the vehicle network. This document defines various types of NIECUs. The information in this document applies only to ECUs that are intended to provide networking services. It is not necessary for an ECU to provide any of these services in order to be compliant with the SAE J1939 protocol.
Standard

J1939 Digital Annex

2018-08-02
HISTORICAL
J1939DA_201808
This document is intended to supplement the J1939 documents by offering the J1939 information in a form that can be sorted and search for easier use.
Standard

Digital Annex of Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature

2018-07-16
CURRENT
J2403DA_201807
This document is intended to supplement SAE J2403 by providing the content of Table 1, Table 2, and Table 3 from SAE J2403 in a form that can be sorted and searched for easier use. It is NOT intended as a substitute for the actual document, and any discrepancies between this Digital Annex and the published SAE J2403 document must be resolved in favor of the published document. This document provides the content of Table 1 and Table 2 published in SAE J2403 into the single table in the 'Term' tab, while the 'Recommended Term Definitions' tab provides the content of Table 3 in SAE J2403 and the 'Glossary' tab provides the content of Table 4 in SAE J2403.
Standard

Vehicle Application Layer

2017-08-15
WIP
J1939/71
The SAE J1939 communications network is developed for use in heavy-duty environments and suitable for horizontally integrated vehicle industries. The SAE J1939 communications network is applicable for light-duty, medium-duty, and heavy- duty vehicles used on-road or off-road, and for appropriate stationary applications which use vehicle derived components (e.g., generator sets). Vehicles of interest include, but are not limited to, on-highway and off-highway trucks and their trailers, construction equipment, and agricultural equipment and implements.   SAE J1939-71 Vehicle Application Layer is the SAE J1939 reference document for the conventions and notations that specify parameter placement in PGN data fields, the conventions for ASCII parameters, and conventions for PGN transmission rates.
Standard

Digital Annex of Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature

2017-03-30
HISTORICAL
J2403DA_201703
This document is intended to supplement SAE J2403 by providing the content of Table 1, Table 2, and Table 3 from SAE J2403 in a form that can be sorted and searched for easier use. It is NOT intended as a substitute for the actual document, and any discrepancies between this Digital Annex and the published SAE J2403 document must be resolved in favor of the published document. This document provides the content of Table 1 and Table 2 published in SAE J2403 into the single table in the 'Term' tab, while the 'Recommended Term Definitions' tab provides the content of Table 3 in SAE J2403 and the 'Glossary' tab provides the content of Table 4 in SAE J2403.
Standard

Digital Annex of Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature

2016-02-18
HISTORICAL
J2403DA_201602
This document is intended to supplement SAE J2403 by providing the content of Table 1, Table 2, and Table 3 from SAE J2403 in a form that can be sorted and searched for easier use. It is NOT intended as a substitute for the actual document, and any discrepancies between this Digital Annex and the published SAE J2403 document must be resolved in favor of the published document. This document provides the content of Table 1 and Table 2 published in SAE J2403 into the single table in the 'Term' tab, while the 'Recommended Term Definitions' tab provides the content of Table 3 in SAE J2403 and the 'Glossary' tab provides the content of Table 4 in SAE J2403.
Standard

Automatic Baud Rate Detection Process

2015-10-14
HISTORICAL
J1939/16_201510
Define a process enabling devices to detect the baud rate of a network automatically with the intent of minimizing or eliminating communication disruption between existing devices.
Standard

Network Layer

2014-04-16
HISTORICAL
J1939/31_201404
SAE J1939-31 Network Layer describes the requirements and services for Network Interconnection ECUs (NIECU) that enable electronic control units (ECUs) on a network segment to intercommunicate with other ECUs on different network segments of the vehicle network. This document defines various types of NIECUs. The information in this document applies only to ECUs that are intended to provide networking services. It is not necessary for an ECU to provide any of these services in order to be compliant with the SAE J1939 protocol.
Standard

Digital Annex of Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature

2014-02-07
HISTORICAL
J2403DA_201402
This document is intended to supplement SAE J2403 by providing the content of Table 1, Table 2, and Table 3 from SAE J2403 in a form that can be sorted and searched for easier use. It is NOT intended as a substitute for the actual document, and any discrepancies between this Digital Annex and the published SAE J2403 document must be resolved in favor of the published document. This document provides the content of Table 1 and Table 2 published in SAE J2403 into the single table in the 'Term' tab, while the 'Recommended Term Definitions' tab provides the content of Table 3 in SAE J2403 and the 'Glossary' tab provides the content of Table 4 in SAE J2403.
Standard

J1939 Digital Annex

2013-11-19
HISTORICAL
J1939DA_201311
The J1939 Digital Annex The J1939 Digital Annex, introduced in August 2013, offers key J1939 technical data in an Electronic Spreadsheet that can be easily searched, sorted, and adapted to other formats. J1939DA contains all of the SPNs (parameters), PGNs (messages), and other J1939 data previously published in the SAE J1939 top level document. J1939DA also contains all of the SLOTs, Manufacturer ID Codes, NAME Functions, and Preferred Addresses previously published in the SAE J1939 top level and the J1939-71 document. J1939DA contains the complete technical details for all of the SPNs and PGNs previously published in the SAE J1939-71 document. For all other SPNs and PGNs which are published in a document other than SAE J1939-71, J1939DA lists only basic details along with a reference to the document that contains the complete technical details. J1939DA replaces, and expands upon, the 1939 Companion Spreadsheet (CS1939), which was last published through November 2012.
Standard

Vehicle Application Layer

2013-09-03
HISTORICAL
J1939/71_201309
SAE J1939-71 Vehicle Application Layer is the SAE J1939 reference document for the conventions and notations that specify parameter placement in PGN data fields, the conventions for ASCII parameters, and conventions for PGN transmission rates. This document previously contained the majority of the SAE J1939 data parameters and messages for information exchange between the ECU applications connected to the SAE J1939 communications network. The data parameters (SPNs) and messages (PGNs) previously published within this document are now published in SAE J1939DA. The reference figures and reference information for the SPNs and PGNs associated with the SAE J1939-71 document are published in this document. The data parameters (SPNs) and messages (PGNs) associated with this document are applicable to most SAE J1939 applications. There are several SAE J1939-7X documents that collectively define all of the SAE J1939 application layer data parameters and messages.
Standard

Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature

2012-06-04
HISTORICAL
J2403_201206
This SAE Recommended Practice is applicable to all E/E systems on MD and HD vehicles. The terms defined are largely focused on compression-ignited and spark-ignited engines. Specific applications of this document include diagnostic, service and repair manuals, bulletins and updates, training manuals, repair data bases, under-hood emission labels, and emission certification applications. This document focuses on diagnostic terms, definitions, abbreviations, and acronyms applicable to E/E systems. It also covers mechanical systems which require definition. Nothing in this document should be construed as prohibiting the introduction of a term, abbreviation, or acronym not covered by this document. The use and appropriate updating of this document is strongly encouraged. Certain terms have already been in common use and are readily understood by manufacturers and technicians, but do not follow the methodology of this document.
Standard

On-Highway Equipment Control and Communication Network

2011-05-23
HISTORICAL
J1939/1_201105
SAE J1939-01 On-Highway Equipment Control and Communication Network specifies the minimum set of SAE J1939 documents that define the Truck and Bus Control and Communications Vehicle Network as it applies to on-highway equipment. Vehicles covered include all on-highway straight trucks and road trains. A road train consists of one towing vehicle (tractor) and one or more towed vehicles (trailers and dollies). Dolly axles within the road train are considered to be towed vehicles.
Standard

Vehicle Application Layer (Through May 2010)

2011-03-15
HISTORICAL
J1939/71_201103
As described in the parent document, SAE J1939, there is a minimum of seven documents required to fully define a complete version of this network. This particular SAE Recommended Practice, SAE J1939-71, describes an Application Layer for vehicle use.
Standard

Network Layer

2010-05-03
HISTORICAL
J1939/31_201005
The Network Layer document describes the requirements and services for Network Interconnection ECUs (NIECU) that enable electronic control units (ECUs) on a network segment to intercommunicate with other ECUs on different network segments of the vehicle network. This document defines various types of NIECUs. The information in this document applies only to ECUs that are intended to provide networking services. It is not necessary for an ECU to provide any of these services in order to be compliant with the SAE J1939 protocol.
X