Refine Your Search

Topic

Search Results

Training / Education

Sound Package Materials for Vehicle Noise Control

2020-09-24
The sound package materials for vehicle noise control seminar provides a detail and thorough analysis of three different classes of acoustical materials - namely absorbers, barriers, and dampers, how they are different from each other, and acoustical properties that materials should possess for optimum vehicle noise control. The seminar addresses new advances in acoustical materials, primarily in absorption materials that impact the vehicle acoustics. The seminar covers ways to evaluate the acoustical performance of these materials using different test methods, including material, component, and vehicle level measurements.
Training / Education

Corrosion Engineering and Prevention

2020-05-18
The transportation industry, including motor vehicles, aircraft, rail, marine, commercial, off-road and defense vehicles, as well as infrastructures, energy sectors, raw materials, manufacturing, health and food industries all experience significant issues with corrosion which results in billions of dollars of loss each year. Corrosion education and prevention is essential to improve and increase the service life of parts and components which may have a significant impact on the economy of various industries and nations.
Training / Education

Fundamentals of Threaded Fasteners

2019-12-18
Fastener experts believe that upwards of 95% of all fastener failures are the result of either the wrong fastener for the job or improper installation. Whether this shocking figure is accurate or not, it is irrefutable that threaded fasteners are poorly misunderstood by many in both the fastener and user communities. In October 1990 the USS Iwo Jima suffered a catastrophic steam valve accident minutes after leaving port following repairs to its steam plant. In one of the single most deadly events of Operation Desert Storm, ten of the eleven crewmen present in the engine compartment would lose their lives.
Training / Education

Fuel Systems Material Selection and Compatibility with Alternative Fuels

2019-11-19
This course will introduce the participants to the factors governing fuel-material compatibility and methods to predict and empirically determine compatibility for new alternative fuel chemistries.  By understanding the mechanisms and factors associated with chemically-induced degradation, participants will be able to assess the impact of fuel chemistry to infrastructure components, including those associated with vehicle fuel systems.  This course is unique in that it looks at compatibility from a fuel chemistry perspective, especially new fuel types such as alcohols and other biofuels. 
Training / Education

Advanced Power Electronics in Automotive Applications

2019-11-05
It’s estimated that over 40% of the on-board components in the entire car are electronic based and that percentage is expected to rise with the growth of hybrid and autonomous vehicles and will continue to be an enabling technology for a wide range of future loads with new features and functions. From lighting, infotainment, and safety systems, to powertrain systems and beyond, power electronics has become one of the most important areas of the automotive subsystem and bringing this technology to non-electrical engineers will help bridge a knowledge gap that will drive teams forward quicker and more efficiently.
Training / Education

Introduction to Radar for Automotive Applications

2019-11-04
This introduction to radar focuses on understanding how radars work and the trade offs that must be made to achieve its specified performance, focusing on applications to automotive safety and autonomy. The class includes demonstrations of radar signal outputs and describes the chain of hardware and software processing found in most radar systems. Participants will be exposed to all aspects of radar design at a level detailed enough to understand system engineering estimates for the major functions by examining the basic functions of radars, from the waveform generation in the transmitter, all the way to target detection in the receiver.
Training / Education

Introduction to Power Electronics in Automotive Applications

2019-11-04
Modern power electronics (PE) devices and circuits are now in widespread use in automotive and non-automotive applications. The purpose of this course is to give an overall introduction to the key aspects of power electronic circuits, components and design in automotive applications. Topics covered include power semiconductor devices, their characteristics and operation, and their use in power electronics circuits.
Training / Education

Materials Degradation in Mechanical Design: Wear, Corrosion, Fatigue and their Interactions Web Seminar RePlay

2019-09-19
Anytime
Materials degradation from environmental conditions is a common factor that will often occur in mechanical equipment used in every type of environment. These processes can frequently materialize in unpredicted and harmful ways, especially when they interact and lead to early component damage or failure. Captured from five, two-hour sessions, this course summarizes the mechanisms that cause materials and mechanical components to degrade in service through exposure to deleterious mechanical and environmental conditions.
Training / Education

Fluids for Aerospace Hydraulic Systems

This four-hour short course provides an introduction to fluids for aerospace hydraulic systems. Topics covered include an introduction to basics fluid properties, rheology, tribology, and fluid product development. In addition, the history and performance of different classes of fluids are discussed in detail, and specific failure modes such as erosion and sludge formation will be described. Along with an introduction to fluid degradation, information on used oil analysis test methods and interpretation will be provided.
Training / Education

Metals Bundle

2019-05-01
Anytime
Almost 75% of all elements are metals. Metals can be classified as either ferrous or non-ferrous and generally conduct electricity and heat well. Most metals are malleable and ductile and are, in general, heavier than other elemental substances.The following six on-demand courses are included in the Materials bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details.
Training / Education

High Temperature Materials Bundle

2019-04-25
Anytime
Metals and alloys all have different melting ranges depending on their chemistry. High temperature metals are much harder at room temperature, have exceptionally high melting points (usually above 2000 degree Celsius), and are resistant to wear, corrosion and deformation. The following five on-demand courses are included in the High Temperature Materials bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details.
Training / Education

Polymers Bundle

2019-04-25
Anytime
Polymers are thermoplastic, meaning that once the polymer is formed, it can be heated and reformed repeatedly. Both synthetic and natural polymers play an essential role because of their broad range of properties. Polymers are relatively low-cost and allow for a wide range of characteristics and colors. Polymers can be both thermal and electrical insulators and very resistant to chemicals. The following five on-demand courses are included in the Polymers bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details.
Training / Education

Nonferrous Metals Bundle

2019-04-24
Anytime
Nonferrous materials are malleable, are non-magnetic, and have no iron content which gives them higher resistance to rust and corrosion. The following five on-demand courses are included in the Nonferrous Metals bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details. Introduction to Physical Properties  This course provides an an overview of manufacturing materials and their physical properties, including thermal, electrical, and magnetic properties and introduces volumetric characteristics, such as mass, weight, and density.
Training / Education

Ferrous Metals Bundle: Steel and Cast Iron

2019-04-24
Anytime
Ferrous metals contain iron and are prized for their tensile strength and durability.  Most are magnetic and contain a high carbon content which generally makes them, with the exception of wrought iron and stainless steel, vulnerable to rust. The following seven on-demand courses are included in the Ferrous Materials Bundle: Steel and Cast Iron.  Each course is approximately one-hour in duration. See Topics/Outline for additional details.
Training / Education

Introduction to Materials Bundle

2019-04-17
Anytime
The following six on-demand courses are included in the Introduction to Materials bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details. Introduction to Physical Properties  This course provides an an overview of manufacturing materials and their physical properties, including thermal, electrical, and magnetic properties and introduces volumetric characteristics, such as mass, weight, and density.
Training / Education

Introduction to Hybrid Electric Vehicle Systems

Anytime
Hybrid Electric Vehicle (HEV) models currently populating the vehicle electrification landscape indicate their dominance in the market. Although electric, plug-in, and fuel cell vehicles are making inroads in the market, the HEV stands as the market leader in adoption, and manufacturers have no plans on diminishing HEV production. HEV powertrain operation is totally different from the traditional vehicle. It is essential to understand the various operating modes and how failure modes in the hybrid system affect its operation.
Training / Education

Nickel Metal Hydride (NiMH) Hybrid Battery Systems

Anytime
This course from SAE International training partner, FutureTech*, is a MUST for everyone servicing hybrid vehicles. NiMH battery systems continue primary battery technology in hybrid vehicles and have been since the 2000 model year. If a technical professional doesn’t know the fundamentals of NiMH operation it is impossible for them to perform a solid diagnosis or repair. This course will concentrate on the NiMH technology, how it performs as it ages, how it can effect vehicle performance and fuel economy, and how to test it by using a scan tool.
Training / Education

Basics of Silicone Rubber Science and Technology

Silicone rubber is comprised of inorganic-organic polymers. These materials consist of an inorganic backbone with organic side groups attached to silicon atoms. This family of polymers possesses unmatched versatility giving the formulator and user multiple forms and methods to cross link the polymers into rubber materials having the widest service temperature range of any rubber material. This course is designed to provide the participant with a thorough understanding of silicone’s engineering characteristics.
Training / Education

High Voltage Safety and PPE

Anytime
High Voltage Safety & PPE (Personal Protection Equipment) is a necessary and important course to complete when planning to diagnose or repair hybrid or electric vehicles. This on-demand course, from SAE training partner FutureTech* will provide information on how to test high voltage gloves, when and where to send high voltage gloves for periodic testing, and how to safely use the proper test equipment for measuring high voltage components in live and disabled high voltage systems.
Training / Education

Introduction to Rubber Science and Technology

Rubber – a loosely cross-linked network of polymer chains that when strained to high levels will forcibly return to at or near it original dimensions. This course is designed to provide the participant with a thorough understanding of rubber’s engineering characteristics. This class will introduce the various sources of rubber, both natural and synthetic. The class will contrast the differences between rubber and plastics; including thermoplastic rubber. Detailed discussions on how to select the correct rubber polymer for the application, highlighting the pros and cons of each major rubber type.
X