Search Results

This document specifies that black is the only color that can be used for the insulator at the bottom of the base of T-1 and T-1 ¾ Flanged Base lamps.

This SAE Aerospace Recommended Practice covers the recommended requirements for the lighting and characteristics of instruments; information plates and displays, emergency, cautionary, advisory and status displays; circuit breaker and toggle switch positions; and the recommended requirements for the utility lighting system.

This SAE Aerospace Recommended Practice (ARP) contains methods used to measure the optical performance of airborne electronic flat panel display (FPD) systems. The methods described are specific to the direct view, liquid crystal matrix (x-y addressable) display technology used on aircraft flight decks. The focus of this document is on active matrix, liquid crystal displays (LCD). The majority of the procedures can be applied to other display technologies, however, it is cautioned that some techniques need to be tailored to different display technologies. The document covers monochrome and color LCD operation in the transmissive mode within the visual spectrum (the wavelength range of 380 to 780 nm). These procedures are adaptable to reflective and transflective displays paying special attention to the source illumination geometry. Photometric and colorimetric measurement procedures for airborne direct view CRT (cathode ray tube) displays are found in ARP1782.

This SAE Aerospace Recommended Practice covers the recommended requirements for the lighting and characteristics of instruments; information plates and displays, emergency, cautionary, advisory and status displays; circuit breaker and toggle switch positions; and the recommended requirements for the utility lighting system.

This recommended practice is intended to recommend the basic shapes and dimensions for knobs used in aircraft. Two basic types of knobs, the bar shape and the round shape, are described, as well as several widely used variations of these two basic shapes.

This specification covers the general requirements for red and white individual instrument lights. This document has been streamlined. Appendix A to MIL-L-5057F lists those documents required for MIL-L-5057F acquisition and is a mandatory part of MIL-L-5057F. Those documents listed in Appendix A have the same status as those referenced directly in MIL-L-5057F (first tier documents). All other documents, referenced through tiering, may be used as guidance and information to supplement MIL-L-5057F. This document’s scope is limited to lamp source designs solely. Furthermore, the use of red lighting should not be considered for new design and included within this document to support requirements for existing military aircraft that still operate with this system of lighting.

This ARP describes methods for measuring the visual performance of direct view cathode ray tube displays used in aircraft flight decks and cockpits. Procedures may vary depending upon the type of display (for example, monochrome, color shadowmask, beam index, etc.), but all types are considered.

This document is intended to cover the design of plastic lighted panels, mounting plates, and their installation.

This SAE Aerospace Recommended Practice (ARP) covers the general requirements and test procedures for illuminating systems for integrally lighted aircraft instruments in order to provide (a) uniformity of illumination within each instrument, (b) legibility of instrument presentation under daylight or integral light, and (c) uniformity of illumination between instrument displays.

The scope of this ARP is to provide general requirements for application of electroluminescence to Aerospace Vehicle Crew Station Area instruments and control panels. The design brightness and color recommendations stated in this ARP are intended to apply where a crew station has multiple usage of electroluminescence in both instruments and control panels and when different manufacturers may be involved. These recommendations may also be helpful for the design of individually used displays incorporating electroluminescence, however, this light source has extensive design versatility through variance of manufacturing and operating parameters and the numerous acceptable design recommendations will not be stated herein. Electroluminescence will herein be referred to as EL.

This recommended practice is intended to recommend the basic shapes and dimensions for knobs used in aircraft. Two basic types of knobs, the bar shape and the round shape, are described, as well as several widely used variations of these two basic shapes.

This specification covers the general requirements for integrally illuminated information panels.

This specification covers the general requirements for red and white individual instrument lights. This document has been streamlined. Appendix A to MIL-L-5057F lists those documents required for MIL-L-5057F acquisition and is a mandatory part of MIL-L-5057F. Those documents listed in Appendix A have the same status as those referenced directly in MIL-L-5057F (first tier documents). All other documents, referenced through tiering, may be used as guidance and information to supplement MIL-L-5057F. This document’s scope is limited to lamp source designs solely. Furthermore, the use of red lighting should not be considered for new design and included within this document to support requirements for existing military aircraft that still operate with this system of lighting.

This SAE Aerospace Recommended Practice (ARP) contains methods used to measure the optical performance of airborne electronic flat panel display (FPD) systems. The methods described are specific to the direct view, liquid crystal matrix (x-y addressable) display technology used on aircraft flight decks. The focus of this document is on active matrix, liquid crystal displays (LCD). The majority of the procedures can be applied to other display technologies, however, it is cautioned that some techniques need to be tailored to different display technologies. The document covers monochrome and color LCD operation in the transmissive mode within the visual spectrum (the wavelength range of 380 to 780 nm). These procedures are adaptable to reflective and transflective displays paying special attention to the source illumination geometry. Photometric and colorimetric measurement procedures for airborne direct view CRT (cathode ray tube) displays are found in SAE ARP1782.

This ARP describes methods for measuring the visual performance of direct view cathode ray tube displays used in aircraft flight decks and cockpits. Procedures may vary depending upon the type of display (for example, monochrome, color shadowmask, beam index, etc.), but all types are considered.

This document is intended to cover the design of plastic lighted panels, mounting plates, and their installation.

The scope of this ARP is to provide general requirements for application of electroluminescence to Aerospace Vehicle Crew Station Area instruments and control panels. The design brightness and color recommendations stated in this ARP are intended to apply where a crew station has multiple usage of electroluminescence in both instruments and control panels and when different manufacturers may be involved. These recommendations may also be helpful for the design of individually used displays incorporating electroluminescence, however, this light source has extensive design versatility through variance of manufacturing and operating parameters and the numerous acceptable design recommendations will not be stated herein. Electroluminescence will herein be referred to as EL.

This SAE Aerospace Recommended Practice (ARP) covers the general requirements and test procedures for illuminating systems for integrally lighted aircraft instruments in order to provide (a) uniformity of illumination within each instrument, (b) legibility of instrument presentation under daylight or integral light, and (c) uniformity of illumination between instrument displays.