Refine Your Search

Date

Date

Topic

Topic

Emissions AMS CACRC Commercial Aircraft Composite Repair Committee Standard Anatomy Production Machining processes Electrical, Electronics, and Avionics Thermoplastics Titanium alloys Materials handling

Search Results

Viewing 1 to 20 of 43
123Next >Last >>
Sort by published
Standard

Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 1 - General Requirements
2021-02-23
CURRENT
AMS6885/1
AMS6885/1 gives information about the technical requirements and qualification procedure for unidirectional carbon fiber tape epoxy repair prepreg capable of curing under vacuum for repair of carbon fiber reinforced epoxy structures. The repair system includes an epoxy film adhesive to be applied in a co-bonding process with the prepreg for solid laminate and sandwich bonding.
Standard

Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 3 - Purchasing Specification for Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg
2021-02-22
CURRENT
AMS6885/3
This Purchasing Specification, AMS6885/3, specifies the batch release and delivery requirements for unidirectional carbon fiber tape epoxy prepreg used for repair. This specification is applicable only when the unidirectional carbon fiber tape epoxy prepreg is used as part of the repair system defined in AMS6885 and AMS6885/1. This specification also defines the procedure and requirements for storage life extension of materials purchased against this specification. It is only applicable for materials qualified against AMS6885 (refer to PRI-QPL-AMS6885) and shall be carried out within the responsibility of the purchaser and under control of its Quality organisation.
Standard

Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive
2021-02-22
CURRENT
AMS6885/4
This Purchasing Specification, AMS6885/4, specifies the batch release and delivery requirements for film adhesive used for repair. This specification is applicable only when the film adhesive is used as part of the repair system defined in AMS6885 and AMS6885/1. This specification also defines the procedure and requirements for storage life extension of materials purchased against this specification. It is only applicable for materials qualified against AMS6885 (refer to PRI-QPL-AMS6885), and shall be carried out within the responsibility of the purchaser and under control of its Quality organisation.
Standard

Guidelines for Repair Process Evaluation of Aluminum Bonded Structure
2020-10-15
WIP
AIR6291A
This SAE Aerospace Information Report (AIR) is intended to be used as a process verification guide for evaluating implementation of key factors in repair of metal bond parts or assemblies in a repair shop environment. This guide is to be used in conjunction with a regulatory approved and substantiated repair, and is intended to promote consistency and reliability.
Standard

Masking and Cleaning of Epoxy and Polyester Matrix Thermosetting Composite Materials
2020-02-28
WIP
ARP4916A
This SAE Aerospace Recommended Practice (ARP) describes methods of masking and cleaning commercial aircraft, epoxy and polyester matrix, composite parts prior to their entry into the composites shop, masking and cleaning of on-wing repair areas in preparation for carrying out repairs and wipe cleaning during repair and prior to bonding. It this document is used for the masking or cleaning of materials other than epoxy and polyester matrix thermosetting composite materials, the fitness for this purpose must be determined by the user.

The methods of masking and cleaning described in this document have specific limited application and are not interchangeable. The methods shall only be used when specified in an approved repair procedure or with the agreement of the Original Equipment Manufacturer (OEM) or regulatory authority.

Standard

Composite and Bonded Structure Technician/Specialist Training Document
2018-09-19
CURRENT
AIR4938C
This document establishes the minimum curriculum requirements for training, practical assessments, and certifying composite structure repair personnel and metalbond repair personnel. It establishes criteria for the certification of personnel requiring appropriate knowledge of the technical principles underlying the composite structural repairs and/or metalbond they perform. Persons certified under this document may be eligible for licensing/certification/qualification by an appropriate authority, in addition to this industry accepted technician certification. Teaching levels have been assigned to the curriculum to define the knowledge, skills, and abilities graduates will need to make repairs to composite or metalbond structure. Minimum hours of instruction have been provided to ensure adequate coverage of all subject matter including lecture and laboratory.
Standard

Composite and Bonded Structure Technician/Specialist Training Document
2017-06-05
HISTORICAL
AIR4938B
This is a general curriculum that has been developed to identify the minimum knowledge and skill requirements of a composite and/or metal bond repair technician/specialist. This revision changes the document from an all-inclusive curriculum into a modular set of curricula. Teaching levels have been assigned to the curriculum to define the knowledge, skills, and abilities graduates will need to make repairs to composite or metalbond structure. Minimum hours of instruction have been provided to ensure adequate coverage of all subject matter including lecture and laboratory. These minimums may be exceeded and may include an increase in the total number of training hours and/or increases in the teaching levels. Each curriculum is a subpart of this document. Part 1 is the General Composite Structure Bonded Repair curriculum, independent of the application. Part 2 is the Commercial Aircraft Composite Structure Bonded Repair curriculum.
Standard

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 1 - General Requirements
2016-12-06
CURRENT
AMS3970/1A
AMS3970/1 gives information about the technical requirements and qualification procedure for carbon fiber fabric epoxy prepreg and a companion non-structural glass prepreg used for repair of carbon fiber reinforced epoxy structures. The prepreg system may include a film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests.
Standard

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 2 - Qualification Program for Fiber, Fabric, Carbon Prepreg, Film Adhesive and Non-Structural Glass Prepreg
2016-12-06
CURRENT
AMS3970/2A
AMS3970/2 gives specific information about the qualification program for carbon fiber reinforced epoxy structural repair prepreg systems, applicable for 120 °C (250 °F) vacuum curing. The prepreg system may include an epoxy film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests.
Standard

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 0 - Introduction
2016-12-06
CURRENT
AMS3970A
This document (Technical Specification) gives information about qualification rules and the relation between the different specification parts involved, such as the Technical Specification (TS), Material Specification (MS), and Purchasing Specification (PS). The link to the material qualification and qualified products is presented.
Standard

Composite and Bonded Structure Engineers: Training Document
2016-10-13
CURRENT
AIR5278
This document provides recommendations concerning the minimum knowledge and analytical skill guidelines for a composite and metal bond repair design engineer. Teaching levels have been assigned to this curriculum to define the knowledge, skills and abilities needed to design appropriate repairs. Minimum hours of instruction have been provided to ensure adequate lecture and laboratory coverage of all subject matter. These minimums may be exceeded, and may include an increase in the total number of training hours and/or increases in the teaching levels.
Standard

Composite and Bonded Structure Inspector: Training Document
2016-10-13
HISTORICAL
AIR5279
This document provides recommendations concerning the minimum knowledge and skill guidelines for a composite and metal bond repair inspector. Teaching levels have been assigned to this curriculum to define the knowledge, skills and abilities needed to inspect repairs. Minimum hours of instruction have been provided to ensure adequate lecture and laboratory coverage of all subject matter. These minimums may be exceeded, and may include an increase in the total number of training hours and/or increases in the teaching levels.
Standard

Machining of Composite Materials, Components and Structures
2015-04-15
CURRENT
AIR5367
This SAE Aerospace Information Report (AIR) provides information related to machining of composite materials, components and structures. This document is intended to supplement the machining processes and guidelines provided in OEM repair manuals and structural repair manuals. It is not intended to supersede the approved data provided in OEM repair documents.
123Next >Last >>
X