Refine Your Search

Date

Date

Forming Production Logistics Standard Nickel AMS CACRC Commercial Aircraft Composite Repair Committee

Search Results

Viewing 1 to 20 of 25
12Next >Last >>
Sort by published
Standard

Unidirectional Carbon Fiber Tape Epoxy Repair Prepreg, Vacuum Curing Part 1 - General Requirements
2021-02-23
CURRENT
AMS6885/1
AMS6885/1 gives information about the technical requirements and qualification procedure for unidirectional carbon fiber tape epoxy repair prepreg capable of curing under vacuum for repair of carbon fiber reinforced epoxy structures. The repair system includes an epoxy film adhesive to be applied in a co-bonding process with the prepreg for solid laminate and sandwich bonding.
Standard

Basic Composite Repair Technician Certification Standard
2019-09-10
CURRENT
ARP6262A
It is recognized that the structural integrity of repaired composite structures depends upon the capabilities of the individuals who are responsible for performing the repairs. This document is intended to address repairs of composite structure regardless of the type of structure such as marine, wind turbine, automotive, aircraft, or other applications. This certification standard establishes the minimum requirements for training, examining, and certifying composite structure repair personnel. It establishes criteria for the certification of personnel requiring appropriate knowledge of the technical principles underlying the composite structural repairs they perform. Persons certified under this document may be eligible for licensing or certification/ qualification by an appropriate authority, in addition to this industry accepted basic composite repair technician certification.
Standard

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 1 - General Requirements
2016-12-06
CURRENT
AMS3970/1A
AMS3970/1 gives information about the technical requirements and qualification procedure for carbon fiber fabric epoxy prepreg and a companion non-structural glass prepreg used for repair of carbon fiber reinforced epoxy structures. The prepreg system may include a film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests.
Standard

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 0 - Introduction
2016-12-06
CURRENT
AMS3970A
This document (Technical Specification) gives information about qualification rules and the relation between the different specification parts involved, such as the Technical Specification (TS), Material Specification (MS), and Purchasing Specification (PS). The link to the material qualification and qualified products is presented.
Standard

Composite and Bonded Structure Engineers: Training Document
2016-10-13
CURRENT
AIR5278
This document provides recommendations concerning the minimum knowledge and analytical skill guidelines for a composite and metal bond repair design engineer. Teaching levels have been assigned to this curriculum to define the knowledge, skills and abilities needed to design appropriate repairs. Minimum hours of instruction have been provided to ensure adequate lecture and laboratory coverage of all subject matter. These minimums may be exceeded, and may include an increase in the total number of training hours and/or increases in the teaching levels.
Standard

Composite and Bonded Structure Inspector: Training Document
2016-10-13
HISTORICAL
AIR5279
This document provides recommendations concerning the minimum knowledge and skill guidelines for a composite and metal bond repair inspector. Teaching levels have been assigned to this curriculum to define the knowledge, skills and abilities needed to inspect repairs. Minimum hours of instruction have been provided to ensure adequate lecture and laboratory coverage of all subject matter. These minimums may be exceeded, and may include an increase in the total number of training hours and/or increases in the teaching levels.
Standard

Basic Composite Repair Technician Certification Standard
2014-02-13
HISTORICAL
ARP6262
It is recognized that the structural integrity of repaired composite structures depends upon the capabilities of the individuals who are responsible for performing the repairs. This document is intended to address repairs of composite structure regardless of the type of structure such as marine, wind turbine, automotive, aircraft, or other applications. This certification standard establishes the minimum requirements for training, examining, and certifying composite structure repair personnel. It establishes criteria for the certification of personnel requiring appropriate knowledge of the technical principles underlying the composite structural repairs they perform. Persons certified under this document may be eligible for licensing or certification/ qualification by an appropriate authority, in addition to this industry accepted basic composite repair technician certification.
Standard

Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 0 - Introduction
2006-01-26
HISTORICAL
AMS2980A
This document (Technical Specification) gives information about qualification rules and the relation between the different specification parts involved, such as Technical Specification (TS), Material Specification (MS), and Purchasing Specification (PS). The link to material qualification and qualified products is presented.
Standard

Carbon Fiber Fabric Repair Prepreg, 125 °C (250 °F) Vacuum Curing Part 1 - General Requirements
1999-12-01
HISTORICAL
AMS3970/1
AMS 3970/1 gives information about the technical requirements and qualification procedure for carbon fiber fabric epoxy prepreg used for repair of carbon fiber reinforced epoxy structures. The prepreg system may include a film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests.
12Next >Last >>
X